Re: [avr-chat] arduino upload problem

[Danilo Uccelli]

2010/9/21 Renato <address@hidden>
>
> Hi, I'm trying to upload a sketch to an Arduino Duemilanove with
> avrdude but I'm getting the error pasted below. I really don't have a
> clue of the avrdude command syntax, it was generated by the Arduino
> IDE - sorry for that. But I searched a lot for this error and couldn't
> find an answer. The board is connected at /dev/ttuUSB0.
>
> I'm on Archlinux, up to date. The uploading works ok with other systems so I 
> think it isn't
> a hardware problem.
>
> Also, this command returns nothing, so the board is not being used by
> another process:
> sudo lsof |grep ttyUSB
>
> Any help is very much appreciated.
>
> renato
>
> $ avrdude -C/home/renato/Desktop/arduino-0019/hardware/tools/avrdude.conf -v 
> -v -v -v -patmega328p -cstk500v1 -P/dev/ttyUSB0 -b57600 -D 
> -Uflash:w:/tmp/build7961644783492409942.tmp/blink.cpp.hex:i
> avrdude: Version 5.10, compiled on Apr  3 2010 at 18:48:10
>         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
>         Copyright (c) 2007-2009 Joerg Wunsch
>
>         System wide configuration file is 
> "/home/renato/Desktop/arduino-0019/hardware/tools/avrdude.conf"
>         User configuration file is "/home/renato/.avrduderc"
>         User configuration file does not exist or is not a regular file, 
> skipping
>
>         Using Port                    : /dev/ttyUSB0
>         Using Programmer              : stk500v1
>         Overriding Baud Rate          : 57600
> avrdude: Send: 0 [30]   [20]
> avrdude: Send: 0 [30]   [20]
> avrdude: Send: 0 [30]   [20]
> avrdude: ser_recv(): programmer is not responding
> avrdude: stk500_recv(): programmer is not responding
>
> avrdude done.  Thank you.
>

Hi,
Have you tried to use sudo in front of your command ?

Danilo

P.S. Sorry for the private response, here is copy to the list...