Re: [avr-chat] Need help with Avrdude and Arduino Uno CORRECTION

[John Tucker]

Ormund:

Sorry, I re-read my input line and see I made a mistake.  You seem to 
have started me on the right path and I'm most gratefull. When I 
retyped the input correctly:

<input>
address@hidden:/home/knoppix# ./avrdude -c arduino -p m328p -P 
/dev/ttyACM0 -vv


<output>
avrdude: Version 5.10, compiled on May 24 2011 at 21:10:31
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2009 Joerg Wunsch

         System wide configuration file is 
"/usr/local/etc/avrdude.conf"
         User configuration file is "/root/.avrduderc"
         User configuration file does not exist or is not a regular 
file, skipping

         Using Port                    : /dev/ttyACM0
         Using Programmer              : arduino
         AVR Part                      : ATMEGA328P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page                 
      
Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages 
MinW  MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ 
----- ----- ---------
           eeprom        65     5     4    0 no       1024    4      0  
3600  3600 0xff 0xff
           flash         65     6   128    0 yes     32768  128    256  
4500  4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  
4500  4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  
4500  4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  
4500  4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  
4500  4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     
0     0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     
0     0 0x00 0x00

         Programmer Type : Arduino
         Description     : Arduino
         Hardware Version: 3
         Firmware Version: 3.3
         Vtarget         : 0.3 V
         Varef           : 0.3 V
         Oscillator      : 28.800 kHz
         SCK period      : 3.3 us

avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 
0.01s

avrdude: Device signature = 0x1e950f
avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0
avrdude: safemode: efuse reads as 0

avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0
avrdude: safemode: efuse reads as 0
avrdude: safemode: Fuses OK

avrdude done.  Thank you.

Thanks again.

Jack