[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] atmega16
From: |
Douglas Dotson |
Subject: |
Re: [avr-gcc-list] atmega16 |
Date: |
Wed, 29 Dec 2004 14:30:58 -0800 (PST) |
--- Geoffrey Wossum <address@hidden> wrote:
> On Tuesday 28 December 2004 10:37 pm, Douglas Dotson
> wrote:
> > So are you saying that having a JTAG interface
> > is not compatable with using the ADC. Do I have
> > to use the ISP instead? Seems strange that if the
> > JTAG is on the same port as the ADC renders
> > the other useless.
>
> I've never used the JTAG for purely programming a
> part, so I don't know if
> JTAGEN has to be set for that. But I do know that
> if JTAGEN is set, then the
> JTAG pins are not available for your program. I've
> torn my hair out a couple
> of times debugging "bad software", only to figure
> out a couple of hours later
> that the chip had the JTAGEN set.
>
> ---
> Geoffrey Wossum
> Long Range Systems - http://www.pager.net
Doesn't really answer my question. If I download
software into a part then run it with no breapoints,
etc, Does the JTAG interfere with the ADC?
Doug
- Re: [avr-gcc-list] atmega16, (continued)
- Re: [avr-gcc-list] atmega16, Russell Shaw, 2004/12/28
- Re: [avr-gcc-list] atmega16, hanzl, 2004/12/28
- Re: [avr-gcc-list] atmega16, Russell Shaw, 2004/12/28
- Re: [avr-gcc-list] atmega16, Mattias Svensson, 2004/12/28
- Re: [avr-gcc-list] atmega16, hanzl, 2004/12/28
- Re: [avr-gcc-list] atmega16, Douglas Dotson, 2004/12/28
- Re: [avr-gcc-list] atmega16, Geoffrey Wossum, 2004/12/28
- Re: [avr-gcc-list] atmega16, Douglas Dotson, 2004/12/28
- Re: [avr-gcc-list] atmega16, Geoffrey Wossum, 2004/12/29
- Re: [avr-gcc-list] atmega16, Graham Davies, 2004/12/29
- Re: [avr-gcc-list] atmega16,
Douglas Dotson <=
- JTAG (was Re: [avr-gcc-list] atmega16), Graham Davies, 2004/12/29
Re: [avr-gcc-list] atmega16, Mattias Svensson, 2004/12/28