RE: [avr-gcc-list] Error when compiling GCC 4.1.1

[Eric Weddington]

There was a slight difference between the patch that you have and the patch
that Joerg Wunsch and I use. The one we use is attached.

Eric 

> -----Original Message-----
> From: 
> address@hidden 
> [mailto:address@hidden
> org] On Behalf Of Gerard Marull Paretas
> Sent: Monday, January 29, 2007 11:46 AM
> To: address@hidden
> Subject: [avr-gcc-list] Error when compiling GCC 4.1.1
> 
> Hello! 
> 
> I've been trying to compile GCC 4.1.1 under linux, including 
> some of the patches that WinAVR new release (2007) takes. All 
> the patches work fine, but when I finally add the 
> gcc-4.1-new-devices-m256X.patch [Which I specially need to 
> get atmega2561 running!], I'm not able to compile. The error 
> returned by gcc is the following one: 
> 
> 
> Code:
> 
> make[2]: Nothing to be done for `all'. 
> make[2]: Leaving directory 
> `/home/gerard/Desktop/gcc-4.1.1/obj-avr/build-x86_64-unknown-l
> inux-gnu/fixincludes' 
> make[2]: Entering directory 
> `/home/gerard/Desktop/gcc-4.1.1/obj-avr/libcpp' 
> test -f config.h || (rm -f stamp-h1 && make stamp-h1) 
> make[2]: Leaving directory 
> `/home/gerard/Desktop/gcc-4.1.1/obj-avr/libcpp' 
> make[2]: Entering directory 
> `/home/gerard/Desktop/gcc-4.1.1/obj-avr/gcc' 
> make \ 
>           CFLAGS="-g -O2  -W -Wall -Wwrite-strings 
> -Wstrict-prototypes -Wmissing-prototypes -pedantic 
> -Wno-long-long -Wno-variadic-macros -Wold-style-definition 
> -Wmissing-format-attribute  " \ 
>           CONFIG_H="config.h  auto-host.h 
> ../../gcc/../include/ansidecl.h" \ 
>           MAKEOVERRIDES= \ 
>           -f libgcc.mk all 
> make[3]: Entering directory 
> `/home/gerard/Desktop/gcc-4.1.1/obj-avr/gcc' 
> /home/gerard/Desktop/gcc-4.1.1/obj-avr/./gcc/xgcc 
> -B/home/gerard/Desktop/gcc-4.1.1/obj-avr/./gcc/ 
> -B/usr/local/avr/avr/bin/ -B/usr/local/avr/avr/lib/ -isystem 
> /usr/local/avr/avr/include -isystem 
> /usr/local/avr/avr/sys-include -O2  -O2 -g -O2   -DIN_GCC 
> -DCROSS_COMPILE   -W -Wall -Wwrite-strings 
> -Wstrict-prototypes -Wmissing-prototypes 
> -Wold-style-definition  -isystem ./include  -DDF=SF 
> -Dinhibit_libc -mcall-prologues -g  -DIN_LIBGCC2 
> -D__GCC_FLOAT_NOT_NEEDED -Dinhibit_libc -I. -I. -I../../gcc 
> -I../../gcc/. -I../../gcc/../include 
> -I../../gcc/../libcpp/include  -DL_muldi3 -c 
> ../../gcc/libgcc2.c -o libgcc/./_muldi3.o 
> /tmp/ccdQdZmJ.s: Assembler messages: 
> /tmp/ccdQdZmJ.s:26: Error: `)' required 
> /tmp/ccdQdZmJ.s:26: Error: garbage at end of line 
> /tmp/ccdQdZmJ.s:27: Error: `)' required 
> /tmp/ccdQdZmJ.s:27: Error: garbage at end of line 
> make[3]: *** [libgcc/./_muldi3.o] Error 1 
> make[3]: Leaving directory 
> `/home/gerard/Desktop/gcc-4.1.1/obj-avr/gcc' 
> make[2]: *** [stmp-multilib] Error 2 
> make[2]: Leaving directory 
> `/home/gerard/Desktop/gcc-4.1.1/obj-avr/gcc' 
> make[1]: *** [all-gcc] Error 2 
> make[1]: Leaving directory `/home/gerard/Desktop/gcc-4.1.1/obj-avr' 
> make: *** [all] Error 2 
> 
> 
> 
> Is there any solution? 
> 
> Thanks for your help! 
> 
> And I've got a last question. I have started a new project, 
> and I've chosen atmega2561 for it, but I see in some posts & 
> mails that this version is supported as a "beta". May I 
> change to m1281?
> 
> Gerard.
> 
> P.D. I attach the patch that's giving that error.
> 
>

gcc-4.1-new-devices-m256X.patch
Description: Binary data