RE: [avr-gcc-list] I cannot change target/port in avr-insight

[Eric Weddington]

> -----Original Message-----
> From: Chunhua Li [mailto:address@hidden
> Sent: Thursday, July 26, 2007 1:38 PM
> To: Eric Weddington
> Cc: address@hidden
> Subject: Re: [avr-gcc-list] I cannot change target/port in avr-insight
>
> On Wed, Jul 25, 2007 at 12:34:08PM -0600, Eric Weddington wrote:
> >
> > [Please include the avr-gcc-list in your reply so others may see the
> > discussion.]
> >
> > > > > Dear list,
> > > > > I have successfully built the avr-gcc tool chains in
> a Linux box.
> > > >
> > > > What version of avr-insight are you using?
> > >
> > >
> > > I am using avr-insight 6.5. I download insight-6.5 and winavr
> > > patches from CVS. I complie
> > > avr-insight as root.
> > >    # tar jxvf $CWD/insight-6.5.tar.bz2
> > >    # cd insight-6.5
> > >    # # Applying patches
> > >    # patch -p0 <
> > > $CWD/patches/insight/6.5/50-insight-6.5-atmega256x-binutils.patch
> > >    # patch -p0 <
> > > $CWD/patches/insight/6.5/60-insight-6.5-wintermute-mingw.patch
> > >    # ./configure --prefix=$PREFIX --target=avr
> > >    # make install
> >
> > You said above that you are building on Linux. If so, then
> don't use the
> > 60-insight-6.5-wintermute-mingw.patch as that is specific to MinGW
> > (Windows). You only need the atmega256x-binutils.patch if
> you are using an
> > ATmega2560 or ATmega2561. I would also suggest that you use
> the latest
> > Insight version, 6.6 to see if that fixes your problem.
> >
> > Eric
> >
> No luck when I upgrade to insight 6.6. When I move the cursor
> to port line where the number
> of 1000 is displayed, but I cannot change it. When I changed
> the desktop from KDE to Gnome,
> the problem is still there.
>
> Can anybody help?

Note that if you don't get many responses here, then you might ask on the
Insight mailing list...

Eric