[avr-gcc-list] Problem to control S1D13305 (SED1335-Epson Controller) with using ATmega32

[Sach]

hi,

I am trying to control S1D13305 (SED1335-Epson Controller) based Graphic LCD
with using AVR ATmega32 microcontroller.

I have written the demo code in c language for it in AVRStudio4. The problem
is i am not getting any output on LCD. I have read the datasheet of SED1335
many times but i can not understand in details how to initialize LCD, about
delay of LCD, contrast port values etc.

Please help me with this.

Regards,
Sachin Rathod,
India.

My code looks like this:

#include <avr/io.h>

void IOInit(void);
void LcdInit(void);
void SendLcdCommand(unsigned char Command);
void SendLcdData(unsigned char Data);
void Delay(unsigned int counter);
void ClearText(void);
void ClearGraphics(void);
void InstructionSet(void);

#define DataPort        PORTC
#define CtrlPort        PORTD
#define DataDDR         DDRC
#define CtrlDDR         DDRD

#define RD                      (1<<PD0)
#define WR                      (1<<PD1)
#define A0                      (1<<PD2)
#define CS                      (1<<PD3)
#define RST                     (1<<PD4)
#define FS1                     (1<<PD5)

#define SystemSet       0x40
#define SleepIn         0x53
#define DispOff         0x58
#define DispOn          0x59
#define Scroll          0x44
#define CurForm         0x5D
#define CGRAMAddr       0x5C
#define CurRight        0x4C
#define CurLeft         0x4D
#define CurUp           0x4E
#define CurDown         0x4F
#define HdotScr         0x5A
#define Overlay         0x5B
#define SetCurAddr      0x46
#define ReadCurAddr     0x47
#define MemWrite        0x42
#define MemRead         0x43

unsigned int i = 1000;

int main(void)
{
        IOInit();
        Delay(i);
        LcdInit();
        InstructionSet();
        SendLcdCommand(SetCurAddr);
        SendLcdData(0x00);
        SendLcdData(0x00);
        SendLcdCommand(CurRight);
        SendLcdCommand(MemWrite);

        for (i = 0; i<= 39; i++)
        {
                SendLcdData('A');
        }
        while(1);
}

void IOInit(void)
{
        DataDDR = 0xFF;
        CtrlDDR = (RD|WR|A0|CS|RST|FS1);
}

void LcdInit(void)
{
        CtrlPort |= (RD|WR);
        CtrlPort &= (~CS)|(~RST)|(~FS1);
        Delay(i);
        CtrlPort |= RST;        
}

void SendLcdCommand(unsigned char Command)
{
        CtrlPort |= A0;
        DataPort  = Command;
        CtrlPort &= (~WR);
        Delay(i);
        CtrlPort |= WR;
}

void SendLcdData(unsigned char Data)
{
        CtrlPort &= (~A0);
        DataPort  = Data;
        CtrlPort &= (~WR);
        Delay(i);
        CtrlPort |= WR;
}

void Delay(unsigned int counter)
{
        while(counter)
        {
                counter = counter - 1;
        }
}

void ClearText(void)
{
        SendLcdCommand(SetCurAddr);
        SendLcdData(0x00);
        SendLcdData(0x00);
        SendLcdCommand(CurRight);
        SendLcdCommand(MemWrite);
        for(i = 0; i <= 1200; i++)
        {
                SendLcdData(0x20);
        }
}


void ClearGraphics(void)
{
        SendLcdCommand(SetCurAddr);
        SendLcdData(0x00);
        SendLcdData(0x10);
        SendLcdCommand(CurRight);
        SendLcdCommand(MemWrite);
        for(i = 0; i <= 9600; i++)
        {
                SendLcdData(0x00);
        }
}

void InstructionSet(void)
{
        SendLcdCommand(SystemSet);
        SendLcdData(0x32);
        SendLcdData(0x87);
        SendLcdData(0x07);
        SendLcdData(0x27);
        SendLcdData(0x2B);
        SendLcdData(0xEF);
        SendLcdData(0x28);
        SendLcdData(0x00);
        SendLcdCommand(Scroll);
        SendLcdData(0x00);
        SendLcdData(0x00);
        SendLcdData(0xEF);
        SendLcdData(0x00);
        SendLcdData(0x10);
        SendLcdData(0xEF);
        SendLcdCommand(Overlay);
        SendLcdData(0x01);
        SendLcdCommand(DispOff);
        SendLcdData(0x00);
        ClearText();
        ClearGraphics();
        SendLcdCommand(DispOn);
        SendLcdData(0x14);
        SendLcdCommand(SetCurAddr);
        SendLcdData(0x00);
        SendLcdData(0x00);
        SendLcdCommand(CurForm);
        SendLcdData(0x04);
        SendLcdData(0x86);
}

-- 
View this message in context: 
http://www.nabble.com/Problem-to-control-S1D13305-%28SED1335-Epson-Controller%29-with-using-ATmega32-tp18277345p18277345.html
Sent from the AVR - gcc mailing list archive at Nabble.com.