[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-gcc-list] AVR-GCC-list Digest, Vol 97, Issue 1
|
From: |
Gerrit Bosch |
|
Subject: |
Re: [avr-gcc-list] AVR-GCC-list Digest, Vol 97, Issue 1 |
|
Date: |
Fri, 8 Feb 2013 20:10:36 +0100 |
Dear Joerg,
Thanks for your mail. I have been working on this a few hours today. There are
a few things I forgot tov put in my email. Sorry.
First is that the mega2560 socketcard that came with the STK600 works well. So
it has to do with the tiny85.
A logic analyser showed that the signals from the m2560 and the tiny85 were
different. The tiny85 produced something like spikes.
Not being an expert I read at the AVRDUDE man-page about the -B parameter. A
value of 0.1e-120 solved the problem.
I have no idea why. Is there some literature about this?
Thanks again,
Gerrit Bosch.
Op 8 feb. 2013, om 18:00 heeft address@hidden het volgende geschreven:
> Send AVR-GCC-list mailing list submissions to
> address@hidden
>
> To subscribe or unsubscribe via the World Wide Web, visit
> https://lists.nongnu.org/mailman/listinfo/avr-gcc-list
> or, via email, send a message with subject or body 'help' to
> address@hidden
>
> You can reach the person managing the list at
> address@hidden
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of AVR-GCC-list digest..."
>
>
> Today's Topics:
>
> 1. stk600 (Gerrit Bosch)
> 2. Re: stk600 (Joerg Wunsch)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Thu, 7 Feb 2013 22:09:08 +0100
> From: Gerrit Bosch <address@hidden>
> To: address@hidden
> Subject: [avr-gcc-list] stk600
> Message-ID: <address@hidden>
> Content-Type: text/plain; charset=us-ascii
>
> Hello,
>
> Sorry I bother you all with a -for me- confusing but probably simple problem.
> I am trying to use a STK600 to program a tiny85. Connecting to the device
> fails, see below. What should I do??
>
> Using Mac OSX 10.7.5 with Crosspack AVR 20121207. This is from Terminal:
>
> iibmac:~ gbosch$ avrdude -c stk600 -p t85 -P usb:7A:5B -v
>
> avrdude: Version 5.11.1, compiled on Dec 6 2012 at 23:54:36
> Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
> Copyright (c) 2007-2009 Joerg Wunsch
>
> System wide configuration file is
> "/usr/local/CrossPack-AVR-20121207/etc/avrdude.conf"
> User configuration file is "/Users/gbosch/.avrduderc"
> User configuration file does not exist or is not a regular file,
> skipping
>
> Using Port : usb:7A:5B
> Using Programmer : stk600
> avrdude: usbdev_open(): Found STK600, serno: 0048395C7A5B
> AVR Part : ATtiny85
> Chip Erase delay : 4500 us
> PAGEL : P00
> BS2 : P00
> RESET disposition : possible i/o
> RETRY pulse : SCK
> serial program mode : yes
> parallel program mode : yes
> Timeout : 200
> StabDelay : 100
> CmdexeDelay : 25
> SyncLoops : 32
> ByteDelay : 0
> PollIndex : 3
> PollValue : 0x53
> Memory Detail :
>
> Block Poll Page
> Polled
> Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
> MaxW ReadBack
> ----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
> ----- ---------
> eeprom 65 6 4 0 no 512 4 0 4000
> 4500 0xff 0xff
> flash 65 6 32 0 yes 8192 64 128 4500
> 4500 0xff 0xff
> signature 0 0 0 0 no 3 0 0 0
> 0 0x00 0x00
> lock 0 0 0 0 no 1 0 0 9000
> 9000 0x00 0x00
> lfuse 0 0 0 0 no 1 0 0 9000
> 9000 0x00 0x00
> hfuse 0 0 0 0 no 1 0 0 9000
> 9000 0x00 0x00
> efuse 0 0 0 0 no 1 0 0 9000
> 9000 0x00 0x00
> calibration 0 0 0 0 no 2 0 0 0
> 0 0x00 0x00
>
> Programmer Type : STK600
> Description : Atmel STK600
> Programmer Model: STK600
> Hardware Version: 3
> Firmware Version Master : 2.20
> Firmware Version Slave 1: 2.01
> Firmware Version Slave 2: 2.02
> Routing card : STK600-RC008T-2
> Socket card : STK600-DIP
> RC_ID table rev : 47
> EC_ID table rev : 1
> Vtarget : 4.8 V
> Varef 0 : 1.10 V
> Varef 1 : 0.00 V
> SCK period : 8.00 us
> Oscillator : 16.007 MHz
>
> avrdude: stk500v2_command(): command failed
> avrdude: stk500v2_program_enable(): bad AVRISPmkII connection status: MOSI
> fail
> avrdude: initialization failed, rc=-1
> Double check connections and try again, or use -F to override
> this check.
>
>
> avrdude done. Thank you.
>
>
> Anyone who can help?
> Thanks, Gerrit.
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 8 Feb 2013 09:04:38 +0100 (MET)
> From: address@hidden (Joerg Wunsch)
> To: address@hidden
> Subject: Re: [avr-gcc-list] stk600
> Message-ID: <address@hidden>
> Content-Type: text/plain; charset=us-ascii
>
> Gerrit Bosch <address@hidden> wrote:
>
>> Connecting to the device fails, see below. What should I do??
>
> Connect it correctly. ;-)
>
>> avrdude: stk500v2_program_enable(): bad AVRISPmkII connection status: MOSI
>> fail
>
> This "MOSI fail" comes directly from the STK600's firmware, so you
> have to convince the STK600. Do you have anything else attached to
> the SPI lines, or are they only used for programming?
>
> --
> cheers, J"org .-.-. --... ...-- -.. . DL8DTL
>
> http://www.sax.de/~joerg/ NIC: JW11-RIPE
> Never trust an operating system you don't have sources for. ;-)
>
>
>
> ------------------------------
>
> _______________________________________________
> AVR-GCC-list mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/avr-gcc-list
>
>
> End of AVR-GCC-list Digest, Vol 97, Issue 1
> *******************************************
>
- Re: [avr-gcc-list] AVR-GCC-list Digest, Vol 97, Issue 1,
Gerrit Bosch <=