Re: [avr-gcc-list] Winavr2010 on Windows 8.1

[Royce Pereira]

 Hi,

I seem to have solved the issue with MHV AVR Tools

(uninstalled winAVR and installed MHV AVR tools from
:https://infernoembedded.com/sites/default/files/project/MHV_AVR_Tools_20131101.exe
 )

and :

1. Installed Mingw-32 from here :

     http://sourceforge.net/projects/mingw/files/latest/download?source=files

2. I manually added "C:\MinGW\bin" and "C:\MinGW\msys\1.0\bin" to the
environment PATH

3.Now make clean / make all works fine (my makefiles are based on the
sample supplied with WinAVR).

4. avrdude 6.0 is included with MHV AVR tools and seems to work,
though I've yet to test it with actual projects

Thank you for your help.

Vasi-Vasi, I think you need to use reply-all so that the mail goes out
to the list besides just me :-)

--Royce


On Sat, Mar 28, 2015 at 3:57 AM, vasi vasi <address@hidden> wrote:
> That dll should be in the MHV AVR Tools... otherwise, you should install
> mingw C/C++ compiler. Or give Atmel Studio another try.
>
> On Fri, Mar 27, 2015 at 10:38 PM, Royce Pereira <address@hidden> wrote:
>>
>> OK, as suggested, I tried MHV AVR tools,
>>
>> If I run make clean (or make all) I get the following errors....
>>
>> > "make.exe" clean all
>> The system cannot find the path specified.
>> ECHO is off.
>> -------- begin --------
>> ECHO is off.
>> Cleaning project:
>> rm -f DT-UP-DN-Select-0614.hex
>>
>>
>>
>> Then I get message box saying that "msys-intl-8.dll" is missing.
>>
>> So what's going on ?
>>
>> Thank you.
>>
>> On Fri, Mar 27, 2015 at 2:16 PM, Royce Pereira <address@hidden> wrote:
>> > Thank you.
>> > I'll try it and report back in 24 hrs.
>> >
>> > On Mar 27, 2015 1:47 PM, "vasi vasi" <address@hidden> wrote:
>> >>
>> >> Royce, I did that already.
>> >> https://infernoembedded.com/products/avr-tools
>> >> There is a make.exe inside. It works on my Win8.1
>> >>
>> >> On Fri, Mar 27, 2015 at 9:22 AM, Royce Pereira <address@hidden>
>> >> wrote:
>> >>>
>> >>> I mean that the make installed on my laptop is the same as the make
>> >>> installed on my desktop, because they have been installed from the
>> >>> same
>> >>> winAVR installer downloaded from source forge.
>> >>>
>> >>> But... Make (and therefore winAVR) works on my laptop, but not on my
>> >>> desktop.
>> >>>
>> >>> The only difference is that I just installed it on my desktop, while I
>> >>> had installed it on my laptop a few months ago.
>> >>>
>> >>> If there is an alternative that can execute makefiles under w 8.1,
>> >>> I'll
>> >>> be happy to try it (do I just replace the make.exe inside winAVR)?
>> >>> Could you
>> >>> post a link?
>> >>>
>> >>> Thank you.
>> >>>
>> >>> On Mar 27, 2015 12:47 PM, "vasi vasi" <address@hidden> wrote:
>> >>>>
>> >>>> Help me understand you. You are referring to
>> >>>> Winavr2010 ... that package have a make executable included? Is not
>> >>>> that
>> >>>> too old? The MHVAVRTools has a more recent make executable which
>> >>>> works just
>> >>>> fine under Win8.1
>> >>>>
>> >>>> On Fri, Mar 27, 2015 at 9:13 AM, Royce Pereira <address@hidden>
>> >>>> wrote:
>> >>>>>
>> >>>>> This is a fresh install of windows 8.1. So I don't think there could
>> >>>>> be
>> >>>>> another make installed.
>> >>>>>
>> >>>>> Also I am using the same winAVR installer everywhere.
>> >>>>>
>> >>>>> Thanks.
>> >>>>>
>> >>>>> On Mar 27, 2015 12:35 PM, "vasi vasi" <address@hidden> wrote:
>> >>>>>>
>> >>>>>> It is possible that there is an old make in the Winavr package? Is
>> >>>>>> the
>> >>>>>> computer choosing it instead of the working one?  The one form the
>> >>>>>> link I
>> >>>>>> gave you (mhvavrtools) is working ok (as you know).
>> >>>>>>
>> >>>>>> On Fri, Mar 27, 2015 at 8:58 AM, Royce Pereira <address@hidden>
>> >>>>>> wrote:
>> >>>>>>>
>> >>>>>>> I have been consistently avoiding Atmel studio.
>> >>>>>>>
>> >>>>>>> I tried have tried it and found it too large and cumbersome, and
>> >>>>>>> painfully slow to load on older computers.
>> >>>>>>>
>> >>>>>>> I prefer to download the tool chain separately and use make to
>> >>>>>>> compile.
>> >>>>>>>
>> >>>>>>> So basically the question is : how to use make in windows 8.1 to
>> >>>>>>> run
>> >>>>>>> my existing avr-gcc makefiles ?
>> >>>>>>>
>> >>>>>>> Thank you!
>> >>>>>>>
>> >>>>>>> On Mar 27, 2015 12:13 PM, "vasi vasi" <address@hidden> wrote:
>> >>>>>>>>
>> >>>>>>>> Royce,
>> >>>>>>>>
>> >>>>>>>> Why you don't use Atmel Studio?
>> >>>>>>>>
>> >>>>>>>> On Fri, Mar 27, 2015 at 8:05 AM, Royce Pereira
>> >>>>>>>> <address@hidden>
>> >>>>>>>> wrote:
>> >>>>>>>>>
>> >>>>>>>>> Hi,
>> >>>>>>>>>
>> >>>>>>>>> The above solution worked perfectly on my laptop running Win 8.1
>> >>>>>>>>> x64.
>> >>>>>>>>>
>> >>>>>>>>> But today (after a few months) I installed WinAVR 2010 on my
>> >>>>>>>>> desktop
>> >>>>>>>>> (Win 8.1 x64), and used the same method above.
>> >>>>>>>>>
>> >>>>>>>>> But here, it does not work!
>> >>>>>>>>>
>> >>>>>>>>> I will be grateful for any suggestions. Thank you !
>> >>>>>>>>>
>> >>>>>>>>> On Thu, Sep 11, 2014 at 5:10 PM, Royce Pereira
>> >>>>>>>>> <address@hidden>
>> >>>>>>>>> wrote:
>> >>>>>>>>> > Thank you!
>> >>>>>>>>> > Your  link solved the issue ;-)
>> >>>>>>>>> >
>> >>>>>>>>> > Best regards,
>> >>>>>>>>> > Royce
>> >>>>>>>>> >
>> >>>>>>>>> > On Sep 10, 2014 10:09 AM, "Dhakshinamoorthy, Soundararajan"
>> >>>>>>>>> > <address@hidden> wrote:
>> >>>>>>>>> >>
>> >>>>>>>>> >> Perhaps you could give this a try, in case you haven't.
>> >>>>>>>>> >>
>> >>>>>>>>> >>
>> >>>>>>>>> >>
>> >>>>>>>>> >>
>> >>>>>>>>> >> http://www.avrfreaks.net/forum/windows-81-compilation-error?name=PNphpBB2&file=viewtopic&t=137881
>> >>>>>>>>> >>
>> >>>>>>>>> >> Thanks,
>> >>>>>>>>> >> Soundararajan
>> >>>>>>>>> >> ________________________________
>> >>>>>>>>> >> From:
>> >>>>>>>>> >> address@hidden
>> >>>>>>>>> >> address@hidden
>> >>>>>>>>> >> on
>> >>>>>>>>> >> behalf of
>> >>>>>>>>> >> Royce Pereira address@hidden
>> >>>>>>>>> >> Sent: 10 September 2014 09:11:19
>> >>>>>>>>> >> To: address@hidden
>> >>>>>>>>> >> Subject: [avr-gcc-list] Winavr2010 on Windows 8.1
>> >>>>>>>>> >>
>> >>>>>>>>> >> Hi,
>> >>>>>>>>> >>
>> >>>>>>>>> >> I’ve installed Winavr2010 on a Win 8.1 PC.
>> >>>>>>>>> >>
>> >>>>>>>>> >> Running ‘Make’ throws the following errors
>> >>>>>>>>> >> (‘Cntr-6d-2X-72x65-0213.c’ is
>> >>>>>>>>> >> my C file):
>> >>>>>>>>> >>
>> >>>>>>>>> >> No problems on Win 7. Please suggest what it is I need to do
>> >>>>>>>>> >> ?
>> >>>>>>>>> >>
>> >>>>>>>>> >> Thanks!
>> >>>>>>>>> >>
>> >>>>>>>>> >> > "make.exe" clean all
>> >>>>>>>>> >>       0 [main] sh 4280 sync_with_child: child 4384(0x14C)
>> >>>>>>>>> >> died
>> >>>>>>>>> >> before
>> >>>>>>>>> >> initialization with status code 0xC0000142
>> >>>>>>>>> >>   30877 [main] sh 4280 sync_with_child: *** child state
>> >>>>>>>>> >> waiting
>> >>>>>>>>> >> for
>> >>>>>>>>> >> longjmp
>> >>>>>>>>> >> /usr/bin/sh: fork: Resource temporarily unavailable
>> >>>>>>>>> >>
>> >>>>>>>>> >> -------- begin --------
>> >>>>>>>>> >>
>> >>>>>>>>> >> Cleaning project:
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.hex
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.eep
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.cof
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.elf
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.map
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.sym
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.lss
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.o
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.lst
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.s
>> >>>>>>>>> >> rm -f Cntr-6d-2X-72x65-0213.d
>> >>>>>>>>> >> rm -f .dep/*
>> >>>>>>>>> >> make.exe: *** [clean_list] Error -1073741502
>> >>>>>>>>> >>
>> >>>>>>>>> >> > Process Exit Code: 2
>> >>>>>>>>> >> > Time Taken: 00:13
>> >>>>>>>>> >>
>> >>>>>>>>> >>
>> >>>>>>>>> >> Best Regards,
>> >>>>>>>>> >> -- Royce Pereira
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>>
>> >>>>>>>>> --
>> >>>>>>>>> Best Regards,
>> >>>>>>>>>
>> >>>>>>>>> -- Royce Pereira
>> >>>>>>>>>
>> >>>>>>>>> _______________________________________________
>> >>>>>>>>> AVR-GCC-list mailing list
>> >>>>>>>>> address@hidden
>> >>>>>>>>> https://lists.nongnu.org/mailman/listinfo/avr-gcc-list
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>>
>> >>>>>>>> --
>> >>>>>>>> Vasi
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>>
>> >>>>>> --
>> >>>>>> Vasi
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>> --
>> >>>> Vasi
>> >>
>> >>
>> >>
>> >>
>> >> --
>> >> Vasi
>>
>>
>>
>> --
>> Best Regards,
>>
>> -- Royce Pereira
>
>
>
>
> --
> Vasi



-- 
Best Regards,

-- Royce Pereira