[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avr-libc-dev] [bugs #10329] crtm168.o is not being built
From: |
Keith Gudger |
Subject: |
Re: [avr-libc-dev] [bugs #10329] crtm168.o is not being built |
Date: |
Thu, 7 Oct 2004 10:04:05 -0700 (PDT) |
Ted:
I ran it in the same directory. I did have --prefix set to /usr/avr,
which caused the new library to be in /usr/avr/avr, which I had to fix.
Maybe I did it then? Thanks.
Keith
On Thu, 7 Oct 2004, Theodore A. Roth wrote:
> On Thu, 7 Oct 2004, Keith Gudger wrote:
>
> > Ted & Eric:
> >
> > I followed this thread because of a problem I found with avr-libc-1.0.4.
> > Hopefully you can tell me I'm all wet, but here's what happened:
> >
> > I got the avr-libc-1.0.4 tar, and built it. Afterwords, the avr3, avr4,
> > and avr5 directories were no longer in my /usr/avr/lib directory, meaning
> > all of those devices were no longer supported. My version of avr-gcc is:
> >
> > avr-gcc (GCC) 3.3 20030428 (prerelease), which with binutils 2.13 should
> > be OK, no? Thanks.
> >
> > I checked config.log, and nothing unusual is in it.
>
> I've seen this happen before.
>
> How are you running configure? I vaguely recall having problems if you
> try to run it from the same directory as configure.in.
>
> ---
> Ted Roth
> PGP Key ID: 0x18F846E9
> Jabber ID: address@hidden
>
Re: [avr-libc-dev] [bugs #10329] crtm168.o is not being built, Keith Gudger, 2004/10/07