[avr-libc-dev] [bug #32723] Add NVM_PROD_SIGNATURES_t in Xmega header files

[Anitha Boyapati]

URL:
  <http://savannah.nongnu.org/bugs/?32723>

                 Summary: Add NVM_PROD_SIGNATURES_t in Xmega header files
                 Project: AVR C Runtime Library
            Submitted by: aboyapati
            Submitted on: Wed 09 Mar 2011 07:03:03 AM GMT
                Category: Header
                Severity: 3 - Normal
                Priority: 5 - Normal
              Item Group: Header files
                  Status: None
        Percent Complete: 0%
             Assigned to: None
             Open/Closed: Open
         Discussion Lock: Any
                 Release: 1.7.1
           Fixed Release: None

    _______________________________________________________

Details:

AVR-GCC has a NVM_PROD_SIGNATURES_t which contains all the registers of the
production signature row. However, when loading from the signature row, you
need the offset. 

Can we please add an enum the same way as IAR does it?

/* Offset definitions for Production Signatures */
typedef enum NVM_PROD_SIGNATURES_offsets {
    RCOSC2M_offset = 0x00, ///< RCOSC 2MHz Calibration Value
    RCOSC32K_offset = 0x02, ///< RCOSC 32kHz Calibration Value
    RCOSC32M_offset = 0x03, ///< RCOSC 32MHz Calibration Value
    LOTNUM0_offset = 0x08, ///< Lot Number Byte 0, ASCII
    LOTNUM1_offset = 0x09, ///< Lot Number Byte 1, ASCII
    LOTNUM2_offset = 0x0A, ///< Lot Number Byte 2, ASCII
    LOTNUM3_offset = 0x0B, ///< Lot Number Byte 3, ASCII
    LOTNUM4_offset = 0x0C, ///< Lot Number Byte 4, ASCII
    LOTNUM5_offset = 0x0D, ///< Lot Number Byte 5, ASCII
    WAFNUM_offset = 0x10, ///< Wafer Number
    COORDX0_offset = 0x12, ///< Wafer Coordinate X Byte 0
    COORDX1_offset = 0x13, ///< Wafer Coordinate X Byte 1
    COORDY0_offset = 0x14, ///< Wafer Coordinate Y Byte 0
    COORDY1_offset = 0x15, ///< Wafer Coordinate Y Byte 1
    ADCACAL0_offset = 0x20, ///< ADCA Calibration Byte 0
    ADCACAL1_offset = 0x21, ///< ADCA Calibration Byte 1
    ADCBCAL0_offset = 0x24, ///< ADCB Calibration Byte 0
    ADCBCAL1_offset = 0x25, ///< ADCB Calibration Byte 1
    TEMPSENSE0_offset = 0x2E, ///< Temperature Sensor Calibration Byte 0
    TEMPSENSE1_offset = 0x2F, ///< Temperature Sensor Calibration Byte 0
    DACAOFFCAL_offset = 0x30, ///< DACA Calibration Byte 0
    DACACAINCAL_offset = 0x31, ///< DACA Calibration Byte 1
    DACBOFFCAL_offset = 0x32, ///< DACB Calibration Byte 0
    DACBGAINCAL_offset = 0x33, ///< DACB Calibration Byte 1
} NVM_PROD_SIGNATURES_offsets_t;


This goes for all XMEGA devices.







    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?32723>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/