[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] Bad programming speed on AT90S8535 using AVRdude
From: |
idefixx |
Subject: |
Re: [avrdude-dev] Bad programming speed on AT90S8535 using AVRdude |
Date: |
Wed, 22 Oct 2003 16:15:06 +1000 |
Additionally I've now tried to program the AT90S8535 with the original
STK500 board with the result that programming speed is even slower:
Using parallel programming dongle Dontronics DT006:
Flash write time: 102 sec
Verifying time: 3.83 sec
Using STK500 board:
Flash write time: 113sec
Verifying time: 3.11 sec
Strange is, for writing 40% of the memory the STK500 uses less than 15 sec,
but the writing process gets slower and slower the more of the memory is
written.
Write delay used in avrdude.conf:
min: 4000
max: 9000
By the way, when using the STK500, avrdude complains about a missing pagel
and bs2 value in the config file.
Regards.
/idefixx