[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] avrdude Prob with Win2000
From: |
Jan-Hinnerk Reichert |
Subject: |
Re: [avrdude-dev] avrdude Prob with Win2000 |
Date: |
Wed, 17 Dec 2003 23:18:53 +0100 |
User-agent: |
KMail/1.5.4 |
On Wednesday 17 December 2003 14:38, Klaus Leidinger wrote:
> I build a small application with the Application Note 910 and tried
> avrdude on my Linux System. Works very well and compilation with
> higher Baudrate was ok.
>
> Then I tried it on my Win2000 systen. compilation worked OK, but I
> always got an Error: avrdude: serial_open(): can't set attributes
> for device "com1" (avrdude 4.2.0)
I can't say much about Win2000. The obvious reasons are
- the port is used by another program
- the account you use, don't has access to this port
- the ports don't work at all
- avrdude does not work on Win2000 (don't hope so)
To narrow the problem you should try to
- communicate with your programmer using Hyperterm
- use another port
Good luck
Jan-Hinnerk
- [avrdude-dev] avrdude Prob with Win2000, Klaus Leidinger, 2003/12/17
- Re: [avrdude-dev] avrdude Prob with Win2000,
Jan-Hinnerk Reichert <=
- Re: [avrdude-dev] avrdude Prob with Win2000, Klaus Leidinger, 2003/12/19
- Re: [avrdude-dev] avrdude Prob with Win2000, Jan-Hinnerk Reichert, 2003/12/19
- Re: [avrdude-dev] avrdude Prob with Win2000, Brian Dean, 2003/12/20
- Re: [avrdude-dev] avrdude Prob with Win2000, Jan-Hinnerk Reichert, 2003/12/20
- Re: [avrdude-dev] avrdude Prob with Win2000, Joerg Wunsch, 2003/12/26