[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] avrdude: stk500_getsync error message
From: |
Peter Warlich |
Subject: |
[avrdude-dev] avrdude: stk500_getsync error message |
Date: |
Thu, 3 Jun 2004 11:53:36 +0200 |
Hi,
I am using avrdude 4.3.0 and an STK500 (v1.46) to program my target board
with an ATmega16 on it.
If I attempt to program the flash or the fuses I get the following message
(have not tried the EEPROM):
avrdude: stk500_getsync (): not in sync: resp=0x15
If I retry the programming or power cycle the stk500 board before the
programming it works fine.
This occurs if I run avrdude from a command line or from WinAVR (040404).
Example of fuse programming command I use:
avrdude -p m16 -c stk500 -U hfuse:w:0xC0:m -U lfuse:w:0c7F:m
Can somebody help me to get around this problem?
/Peter
- [avrdude-dev] avrdude: stk500_getsync error message,
Peter Warlich <=
SV: [avrdude-dev] avrdude: stk500_getsync error message, Peter Warlich, 2004/06/04
SV: [avrdude-dev] avrdude: stk500_getsync error message, Peter Warlich, 2004/06/07