[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] [bugs #8264] flash procedure fail
From: |
Eric Weddington |
Subject: |
[avrdude-dev] [bugs #8264] flash procedure fail |
Date: |
Fri, 18 Jun 2004 14:51:21 -0400 |
User-agent: |
Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.6) Gecko/20040206 Firefox/0.8 |
This mail is an automated notification from the bugs tracker
of the project: AVR Downloader/UploaDEr.
/**************************************************************************/
[bugs #8264] Latest Modifications:
Changes by:
Eric Weddington <address@hidden>
'Date:
Fri 06/18/2004 at 18:51 (America/Denver)
What | Removed | Added
---------------------------------------------------------------------------
Resolution | None | Works for me
Status | Open | Closed
/**************************************************************************/
[bugs #8264] Full Item Snapshot:
URL: <http://savannah.nongnu.org/bugs/?func=detailitem&item_id=8264>
Project: AVR Downloader/UploaDEr
Submitted by: Reiner Muench
On: Tue 03/23/2004 at 14:25
Category: None
Severity: 3 - Ordinary
Item Group: None
Resolution: Works for me
Assigned to: arcanum
Status: Closed
Summary: flash procedure fail
Original Submission: Configuration: WinAVR-20030913-bin-install
mfile.tcl
STK500 / AVRStudio 4.08
Win98se
Description:
When running the flash procedure using <make %d program>, AVRDUDE tries
in vain to establish communication with the STK500. AVRDUDE apparently
does not detect the error and remains as task in the system. This
program can then only be interrupted by using "End Task." This means flashing
is not possible with the STK500.
Follow-up Comments
------------------
-------------------------------------------------------
Date: Fri 06/18/2004 at 18:33 By: c_oflynn
extra note: I have the latest version of avrdude built for windows.
-------------------------------------------------------
Date: Fri 06/18/2004 at 18:31 By: c_oflynn
Hi,
I have Windows 98 and can confirm that it works for me using a similar setup. I
can program flash with my STK500 connected OK (different firmware in my STK500
form yours though).
As well if I force an error condition avrdude does exit (the STK500 not
connected takes a few seconds though).
Regards,
-Colin
-------------------------------------------------------
Date: Tue 03/23/2004 at 18:14 By: MooseC
Yes I'am using pn2 and VSE.
I tried "avrdude -p ATMEGA -P com1 -e -c stk500 -U flash:w:test.hex"
manually on command line
Result: same as before but avrdude can be canceled by closing window
The version avrdudew32 Version 0.1 for MS VISUAL C++ 6.0
( http://www.siwawi.arubi.uni-kl.de/avr_projects/#avrdudew32 ) works fine via
IDE and command line
MooseC
-------------------------------------------------------
Date: Tue 03/23/2004 at 17:03 By: arcanum
Using your "<make %d program>" sounds like you are using avrdude in conjunction
with the WinAVR sample makefile and Programmers Notepad. I suspect that the
problem lies with either one of those. Please verify by calling avrdude
manually on a command line prompt and see if it still hangs.
Note that avrdude is known to work with the stk500 on windows 2000.
For detailed info, follow this link:
<http://savannah.nongnu.org/bugs/?func=detailitem&item_id=8264>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [avrdude-dev] [bugs #8264] flash procedure fail,
Eric Weddington <=