[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] Serial programming AVR with FTDI FT232BM Bit Bang Mode
From: |
Michael Holzt |
Subject: |
Re: [avrdude-dev] Serial programming AVR with FTDI FT232BM Bit Bang Mode |
Date: |
Sun, 14 Aug 2005 01:53:27 +0200 |
User-agent: |
Mutt/1.5.8i |
> So one byte of data to send to SPI becomes sixteen bytes to send over
> USB (two per bit, one with SCLK low and one with SCLK high). FTDI
> supports 4096 byte USB packets, so you can send 256 bytes of real data
> through the SPI per USB packet.
This means you "precalculate" the protocol and then transit it block-wise?
I don't see why this can't be made compatible with the bitbang design.
Instead of the direct output the par and serbb drvier does, the pin changes
can be stored into a buffer and transmitted as a block over usb later.
Regards
Michael
--
It's an insane world, but i'm proud to be a part of it. -- Bill Hicks