[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] Building Avrdude 5.0cvs on FreeBSD
From: |
User Tomdean |
Subject: |
Re: [avrdude-dev] Building Avrdude 5.0cvs on FreeBSD |
Date: |
Tue, 20 Sep 2005 01:25:45 -0700 (PDT) |
I have it working. The code I used was extracted from anoncvs.
I was using a broken avrdude.conf!
Thanks,
tomdean
./avrdude -v -v -p m16 -P /dev/cuaa0 -C ./avrdude.conf -c stk500v2 -t
avrdude: Version 5.0-BETAcvs
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
System wide configuration file is "./avrdude.conf"
User configuration file is "/home/tomdean/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : /dev/cuaa0
Using Programmer : stk500v2
AVR Part : ATMEGA16
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW
ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- -----
---------
eeprom 4 10 128 0 no 512 4 0 9000 9000
0xff 0xff
flash 33 6 128 0 yes 16384 128 128 4500 4500
0xff 0xff
lock 0 0 0 0 no 1 0 0 0 0
0x00 0x00
lfuse 0 0 0 0 no 1 0 0 0 0
0x00 0x00
hfuse 0 0 0 0 no 1 0 0 0 0
0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0
0x00 0x00
Programmer Type : STK500V2
Description : Atmel STK500 V2
Hardware Version: 2
Firmware Version: 2.0
Topcard : Unknown
Vtarget : 5.1 V
Varef : 5.0 V
Oscillator : 3.686 MHz
SCK period : 10.9 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.03s
avrdude: Device signature = 0x1e9403
avrdude: safemode: lfuse reads as E0
avrdude: safemode: hfuse reads as D9
avrdude: safemode is enabled, you will NOT be able to change the fuse bits. Use
-u option to disable
avrdude> quit
>>> quit
avrdude: safemode: lfuse reads as E0
avrdude: safemode: hfuse reads as D9
avrdude: safemode: Fuses OK
avrdude done. Thank you.