[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] Support for at-isp v1.1?
From: |
Brammeleman |
Subject: |
Re: [avrdude-dev] Support for at-isp v1.1? |
Date: |
Tue, 11 Apr 2006 16:33:37 +0000 |
On 4/11/06, Brammeleman <address@hidden> wrote:
>
> On 4/11/06, Joerg Wunsch <address@hidden> wrote:
> > > - Would it be possible let avrdude invert the programming signals,
> > > so that a board like this would be directly supported?
> >
> > Sure, please go ahead and implement it. Should be trivial.
> I'll try the patch you sent, later today. I'm not familiar with the
> source code, but I'll give it a try!
>
Hi Joerg,
Thanks so much for the patch! I can confirm that it works perfectly!!
I don't know how the avrdude development is organised, but can I assume
that the patch is applied to the 'official' source one day?
Then I would also like to submit the programmer configuration for
avrdude.conf:
programmer
id = "atisp";
desc = "AT-ISP V1.1 programming cable for AVR-SDK1 from
<http://micro-research.co.th/> micro-research.co.th";
type = par;
reset = ~6;
sck = ~8;
mosi = ~7;
miso = ~10;
;
Bests,
Bram
--
nerd notes on http://nerdnotes.org