[avrdude-dev] FW: [avr-chat] WHere to buy AVRISP MK1

avrdude-dev
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[avrdude-dev] FW: [avr-chat] WHere to buy AVRISP MK1

From:	Eric Weddington
Subject:	[avrdude-dev] FW: [avr-chat] WHere to buy AVRISP MK1
Date:	Fri, 29 Jun 2007 11:05:35 -0600
[Moving this to the avrdude list. CCing Jörg, as he is the local avrdude
expert.]

Eric

> -----Original Message-----
> From: Anton Erasmus [mailto:address@hidden
> Sent: Friday, June 29, 2007 10:12 AM
> To: Eric Weddington
> Subject: RE: [avr-chat] WHere to buy AVRISP MK1
>
> On 27 Jun 2007 at 15:27, Eric Weddington wrote:
>
> Date sent:            Wed, 27 Jun 2007 15:27:18 -0600
> From:                 Eric Weddington <address@hidden>
> Subject:              RE: [avr-chat] WHere to buy AVRISP MK1
> To:                   "'Anton Erasmus'"
> <address@hidden>, address@hidden
>
> >
> >
> > > -----Original Message-----
> > > From: address@hidden
> > > [mailto:address@hidden
> > >  On Behalf Of Anton Erasmus
> > > Sent: Wednesday, June 27, 2007 3:03 PM
> > > To: address@hidden
> > > Subject: [avr-chat] WHere to buy AVRISP MK1
> > >
> > > Hi,
> > >
> > > Anybody know where I can buy an AVRISP Mk1 or compatible ?
> > > I bought an AVRISP Mk2, but I am having trouble programming
> > > AT90LS2343 using the AVRISP Mk2. I can program it via an STK200,
> > > but I want a programmer that works using either a serial port or a
> > > USB port.
> > > AVR Studio can connect to the device, but does not support
> > > the AT90LS2343
> > > on the AVRISP MK2.
> > > avrdude seems to support it, but I am getting errors with the
> > > latest avrdude
> > > compiled with USB support. It is picking up the programmer,
> > > but reports an error
> > > when trying to read from the device.
> >
> > Hi Anton,
> >
> > What is the error that you're getting with avrdude? Can you
> provide output
> > from running it with -vvvv (four "v"s)?
> >
>
> Hi Eric,
>
> Below is the output from avrdude running on Windows 2000, and below
> that running under Linux. For me it looks like the USB comms
> is OK, and
> that for some reason the avr dragon is no communicating with the
> device. I have double and triple checked the ISP connection, but
> I am still getting this response.
>
> Regards
>   Anton
>
> Windows:
> C:\bin\avrdude>avrdude -c dragon_isp -p 2343 -P usb -B 10 -U
> flash:r:test.bin:r
> -vvvv
>
> avrdude: Version 5.4, compiled on Jun 11 2007 at 20:52:53
>          Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
>
>          System wide configuration file is
> "C:\bin\avrdude\avrdude.conf"
>
>          Using Port            : usb
>          Using Programmer      : dragon_isp
>          Setting bit clk period: 10.0
> avrdude: stk500v2_dragon_isp_open()
> avrdude: usbdev_open(): Found AVRDRAGON, serno: 00A2000014C4
> avrdude: jtagmkII_getsync()
> avrdude: jtagmkII_getsync(): Sending sign-on command:
> avrdude: jtagmkII_send(): sending zd bytes
> avrdude: Sent: . [1b] . [00] . [00] . [01] . [00] . [00] .
> [00] . [0e] . [01] .
> [f3] . [97]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [1a]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [86] . [01] . [ff] . [01] . [01] . [01] .
> [ff] . [09] . [01] .
> [02] . [00] . [a2] . [00] . [00] . [14] . [c4] A [41] V [56]
> R [52] D [44] R [52
> ] A [41] G [47] O [4f] N [4e] . [00]
> avrdude: Recv: ; [3b]
> avrdude: Recv:   [20]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 0 (command_sequence == 0)
>
> Raw message:
> 0x86 0x01 0xff 0x01 0x01 0x01 0xff 0x09 0x01 0x02 0x00 0xa2
> 0x00 0x00 0x14 0xc4
> 0x41 0x56 0x52 0x44 0x52 0x41 0x47 0x4f 0x4e 0x00
> Sign-on succeeded
>
> JTAG ICE mkII sign-on message:
> Communications protocol version: 1
> M_MCU:
>   boot-loader FW version:        255
>   firmware version:              1.01
>   hardware version:              1
> S_MCU:
>   boot-loader FW version:        255
>   firmware version:              1.09
>   hardware version:              2
> Serial number:                   00:a2:00:00:14:c4
> Device ID:                       AVRDRAGON
> avrdude: jtagmkII_setparm()
> avrdude: jtagmkII_setparm(): Sending set parameter command
> (parm 0x03, zu bytes)
> :
> avrdude: jtagmkII_send(): sending zd bytes
> avrdude: Sent: . [1b] . [01] . [00] . [03] . [00] . [00] .
> [00] . [0e] . [02] .
> [03] . [03] . [89] f [66]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [a0]
> avrdude: Recv: . [cf]
> avrdude: Recv: . [a2]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 1 (command_sequence == 1)
>
> Raw message:
> 0xa0
> FAILED
>
> avrdude: jtagmkII_setparm(): bad response to set parameter
> command: RSP_FAILED
> avrdude: jtagmkII_getsync(): ISP activation failed, trying debugWire
> avrdude: jtagmkII_setparm()
> avrdude: jtagmkII_setparm(): Sending set parameter command
> (parm 0x03, zu bytes)
> :
> avrdude: jtagmkII_send(): sending zd bytes
> avrdude: Sent: . [1b] . [02] . [00] . [03] . [00] . [00] .
> [00] . [0e] . [02] .
> [03] . [00] { [7b]   [20]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [02]
> avrdude: Recv: . [00]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [ab]
> avrdude: Recv: . [cc]
> avrdude: Recv: . [96]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 2 (command_sequence == 2)
>
> Raw message:
> 0xab
> No target power
>
> avrdude: jtagmkII_setparm(): bad response to set parameter
> command: RSP_NO_TARGE
> T_POWER
> avrdude: failed to sync with the JTAG ICE mkII in ISP mode
> avrdude: jtagmkII_close()
> avrdude: jtagmkII_close(): Sending sign-off command:
> avrdude: jtagmkII_send(): sending zd bytes
> avrdude: Sent: . [1b] . [03] . [00] . [01] . [00] . [00] .
> [00] . [0e] . [00] .
> [aa] . [0c]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [03]
> avrdude: Recv: . [00]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [80]
> avrdude: Recv: . [a2]
> avrdude: Recv: . [88]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 3 (command_sequence == 3)
>
> Raw message:
> 0x80
> OK
>
> Linux:
>
> address@hidden avr]# avrdude -c dragon_isp -p 2343 -P usb -B 10
> -U flash:r:test.bin:r  -vvvv
> avrdude: Version 5.4, compiled on Jun 28 2007 at 12:53:37
>          Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
>
>          System wide configuration file is
> "/usr/local/etc/avrdude.conf"
>          User configuration file is "/root/.avrduderc"
>          User configuration file does not exist or is not a
> regular file, skipping
>
>          Using Port            : usb
>          Using Programmer      : dragon_isp
>          Setting bit clk period: 10.0
> avrdude: stk500v2_dragon_isp_open()
> avrdude: usbdev_open(): Found AVRDRAGON, serno: 00A2000014C4
> avrdude: jtagmkII_getsync()
> avrdude: jtagmkII_getsync(): Sending sign-on command:
> avrdude: jtagmkII_send(): sending 1 bytes
> avrdude: Sent: . [1b] . [00] . [00] . [01] . [00] . [00] .
> [00] . [0e] . [01] . [f3] . [97]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [1a]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [86] . [01] . [ff] . [01] . [01] . [01] .
> [ff] . [09] . [01] . [02] . [00] . [a2] . [0 0] . [00]
> . [14] . [c4] A [41] V [56] R [52] D [44] R [52] A [41] G
> [47] O [4f] N [4e] . [00]
> avrdude: Recv: ; [3b]
> avrdude: Recv:   [20]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 0 (command_sequence == 0)
>
> Raw message:
> 0x860x010xff0x010x010x010xff0x090x010x020x000xa20x000x000x140xc4
> 0x410x560x520x440x520x410x470x4f0x4e0x00
> Sign-on succeeded
>
> JTAG ICE mkII sign-on message:
> Communications protocol version: 1
> M_MCU:
>   boot-loader FW version:        255
>   firmware version:              1.01
>   hardware version:              1
> S_MCU:
>   boot-loader FW version:        255
>   firmware version:              1.09
>   hardware version:              2
> Serial number:                   00:a2:00:00:14:c4
> Device ID:                       AVRDRAGON
> avrdude: jtagmkII_setparm()
> avrdude: jtagmkII_setparm(): Sending set parameter command
> (parm 0x03, 1 bytes):
> avrdude: jtagmkII_send(): sending 3 bytes
> avrdude: Sent: . [1b] . [01] . [00] . [03] . [00] . [00] .
> [00] . [0e] . [02] . [03] . [03] . [89] f [6 6]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [a0]
> avrdude: Recv: . [cf]
> avrdude: Recv: . [a2]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 1 (command_sequence == 1)
>
> Raw message:
> 0xa0
> FAILED
>
> avrdude: jtagmkII_setparm(): bad response to set parameter
> command: RSP_FAILED
> avrdude: jtagmkII_getsync(): ISP activation failed, trying debugWire
> avrdude: jtagmkII_setparm()
> avrdude: jtagmkII_setparm(): Sending set parameter command
> (parm 0x03, 1 bytes):
> avrdude: jtagmkII_send(): sending 3 bytes
> avrdude: Sent: . [1b] . [02] . [00] . [03] . [00] . [00] .
> [00] . [0e] . [02] . [03] . [00] { [7b]   [2 0]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [02]
> avrdude: Recv: . [00]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [ab]
> avrdude: Recv: . [cc]
> avrdude: Recv: . [96]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 2 (command_sequence == 2)
>
> Raw message:
> 0xab
> No target power
>
> avrdude: jtagmkII_setparm(): bad response to set parameter command:
> RSP_NO_TARGET_POWER
> avrdude: failed to sync with the JTAG ICE mkII in ISP mode
> avrdude: jtagmkII_close()
> avrdude: jtagmkII_close(): Sending sign-off command:
> avrdude: jtagmkII_send(): sending 1 bytes
> avrdude: Sent: . [1b] . [03] . [00] . [01] . [00] . [00] .
> [00] . [0e] . [00] . [aa] . [0c]
> avrdude: jtagmkII_recv():
> avrdude: Recv: . [1b]
> avrdude: Recv: . [03]
> avrdude: Recv: . [00]
> avrdude: Recv: . [01]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [00]
> avrdude: Recv: . [0e]
> avrdude: Recv: . [80]
> avrdude: Recv: . [a2]
> avrdude: Recv: . [88]
> avrdude: jtagmkII_recv(): CRC OK
> avrdude: jtagmkII_recv(): Got message seqno 3 (command_sequence == 3)
>
> Raw message:
> 0x80
> OK
> --
> A J Erasmus
>
>
[Prev in Thread]
Current Thread
[Next in Thread]
[avrdude-dev] FW: [avr-chat] WHere to buy AVRISP MK1, Eric Weddington <=
- Re: [avrdude-dev] FW: [avr-chat] WHere to buy AVRISP MK1, Joerg Wunsch, 2007/06/30
Prev by Date: [avrdude-dev] [bug #20283] Missing dapa interface from avrdude.conf
Next by Date: Re: [avrdude-dev] FW: [avr-chat] WHere to buy AVRISP MK1
Previous by thread: [avrdude-dev] [bug #20283] Missing dapa interface from avrdude.conf
Next by thread: Re: [avrdude-dev] FW: [avr-chat] WHere to buy AVRISP MK1
Index(es):
- Date
- Thread