[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] STK600 Varef1
From: |
Joerg Wunsch |
Subject: |
Re: [avrdude-dev] STK600 Varef1 |
Date: |
Thu, 26 Jun 2008 20:32:16 +0200 |
User-agent: |
Mutt/1.5.11 |
As Tobias Müller wrote:
> The only thing I'm missing at the first time, that I can't set the
> second Ref-Voltage. Is that true or is there a hidden command to
> achieve this?
AVRDUDE(1) FreeBSD General Commands Manual AVRDUDE(1)
NAME
avrdude -- driver program for ``simple'' Atmel AVR MCU programmer
...
Terminal mode
...
... The following commands are currently imple-
mented:
...
varef [channel] voltage
Set the adjustable voltage source to voltage Volts. This
voltage is normally used to drive the target's Aref input
on the STK500. On the Atmel STK600, two reference voltages
are available, which can be selected by the optional
channel argument (either 0 or 1). Only supported on the
STK500 and STK600 programmer.
So it's "varef 1 3.3", for example.
--
cheers, J"org .-.-. --... ...-- -.. . DL8DTL
http://www.sax.de/~joerg/ NIC: JW11-RIPE
Never trust an operating system you don't have sources for. ;-)