[avrdude-dev] [bug #27207] very slow with JTAGICE MKII using jtag2isp

[Markus Schulz]

Follow-up Comment #1, bug #27207 (project avrdude):

I just tried the arduino isp and it also is very slow, is this maybe releated
to the AT90S2313 and the missing PAGEL and BS2?

Thanks,
Markus

avrdude -s -U HIDKeys.hex -c avrisp -p 2313 -P /dev/ttyUSB0 -b 19200

avrdude: please define PAGEL and BS2 signals in the configuration file for
part AT90S2313
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.13s

avrdude: Device signature = 0x1e9101
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be
performed
         To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: please define PAGEL and BS2 signals in the configuration file for
part AT90S2313
avrdude: reading input file "HIDKeys.hex"
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: writing flash (1928 bytes):

Writing | ################################################## | 100% 245.38s

avrdude: 1928 bytes of flash written
avrdude: verifying flash memory against HIDKeys.hex:
avrdude: load data flash data from input file HIDKeys.hex:
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: input file HIDKeys.hex contains 1928 bytes
avrdude: reading on-chip flash data:

Reading | ################################################## | 100% 82.08s

avrdude: verifying ...
avrdude: 1928 bytes of flash verified

avrdude done.  Thank you.


    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?27207>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/