[avrdude-dev] [bug #28744] Can't load bootloader to xmega128a1

[giuliano carlini]

Follow-up Comment #6, bug #28744 (project avrdude):

Still doesn't seem to be working. Perhaps I'm doing soemthing wrong? The
below has been while trying to burn using the arduino IDE. Later this week
I'll try it directly using avrdude from the command line, and I'll be trying
various compiler/linker options to see if that helps, though the current ones
ought to be fine.

I execute the following commands:
/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude
-C/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf
-q -q -patxmega128a1 -cdragon_jtag -Pusb -e -Ulock:w:0x3F:m -Ufuse0:w:0xFF:m
-Ufuse1:w:0xFF:m -Ufuse2:w:0xBF:m -Ufuse4:w:0xFE:m -Ufuse5:w:0xFD:m 

/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools/avr/bin/avrdude
-C/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/tools/avr/etc/avrdude.conf
-v -v -v -v -patxmega128a1 -cdragon_jtag -Pusb
-Uboot:w:/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/arduino/bootloaders/xplain/ATmegaBOOT_xplain.hex:i
-Ulock:w:0x3F:m 

The verbose output shows that the second runs a bit with avrdude and the
dragon whispering sweet nothings to each other, but when asked to actually do
something:

avrdude: reading input file
"/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/arduino/bootloaders/xplain/ATmegaBOOT_xplain.hex"
avrdude: ERROR: address 0x20010 out of range at line 2 of
/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/arduino/bootloaders/xplain/ATmegaBOOT_xplain.hex
avrdude: write to file
'/Users/giuliano/Desktop/Arduino-r881/build/macosx/work/Arduino.app/Contents/Resources/Java/hardware/arduino/bootloaders/xplain/ATmegaBOOT_xplain.hex'
failed
avrdude: jtagmkII_program_disable(): Sending leave progmode command: 
avrdude: jtagmkII_send(): sending 1 bytes
avrdude: Sent: . [1b] . [16] . [00] . [01] . [00] . [00] . [00] . [0e] . [15]
. [9f] . [87] 
avrdude: jtagmkII_recv():




    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?28744>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/