[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [avrdude-dev] [bug #35208] avrdude 5.11 on freebsd 8.2-STABLE does n
From: |
Joerg Wunsch |
Subject: |
Re: [avrdude-dev] [bug #35208] avrdude 5.11 on freebsd 8.2-STABLE does not reset Arduino Uno properly |
Date: |
Mon, 2 Jan 2012 07:45:01 +0100 |
User-agent: |
Mutt/1.5.20 (2009-06-14) |
As anonymous wrote:
> in order to program the Arduino Uno there is code in arduino.c that
> sets the RTS+DTR lines to low, then high again. Unfortunately in
> FreeBSD 8.2-STABLE the RTS and/or DTR lines may not be in a 'high'
> state prior to this. To prevent this from becoming a problem, I
> recommend a simple patch that sets the RTS+DTR to a high state prior
> to going to low again and back to a high state.
To anyone concerned about Arduino: please have a look at this.
To me, the patch (and the explanation) make sense, so I'll apply
it unless someone explains me why it were wrong.
--
cheers, J"org .-.-. --... ...-- -.. . DL8DTL
http://www.sax.de/~joerg/ NIC: JW11-RIPE
Never trust an operating system you don't have sources for. ;-)