[avrdude-dev] [bug #45115] avrdude 6.0.1 fuse bit display incorrect

[jake waters]

Follow-up Comment #4, bug #45115 (project avrdude):

This is not fixed as of version 6.2

$ /usr/bin/avrdude -patmega88p -cusbasp -Pusb -B 5 -v

avrdude: Version 6.2
         Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
         Copyright (c) 2007-2014 Joerg Wunsch

         System wide configuration file is "/etc/avrdude.conf"
         User configuration file is "/home/user/.avrduderc"
         User configuration file does not exist or is not a regular file,
skipping

         Using Port                    : usb
         Using Programmer              : usbasp
         Setting bit clk period        : 5.0
         AVR Part                      : ATmega88P
         Chip Erase delay              : 9000 us
         PAGEL                         : PD7
         BS2                           : PC2
         RESET disposition             : dedicated
         RETRY pulse                   : SCK
         serial program mode           : yes
         parallel program mode         : yes
         Timeout                       : 200
         StabDelay                     : 100
         CmdexeDelay                   : 25
         SyncLoops                     : 32
         ByteDelay                     : 0
         PollIndex                     : 3
         PollValue                     : 0x53
         Memory Detail                 :

                                  Block Poll               Page               
       Polled
           Memory Type Mode Delay Size  Indx Paged  Size   Size #Pages MinW 
MaxW   ReadBack
           ----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
           eeprom        65    20     4    0 no        512    4      0  3600 
3600 0xff 0xff
           flash         65     6    64    0 yes      8192   64    128  4500 
4500 0xff 0xff
           lfuse          0     0     0    0 no          1    0      0  4500 
4500 0x00 0x00
           hfuse          0     0     0    0 no          1    0      0  4500 
4500 0x00 0x00
           efuse          0     0     0    0 no          1    0      0  4500 
4500 0x00 0x00
           lock           0     0     0    0 no          1    0      0  4500 
4500 0x00 0x00
           calibration    0     0     0    0 no          1    0      0     0  
  0 0x00 0x00
           signature      0     0     0    0 no          3    0      0     0  
  0 0x00 0x00

         Programmer Type : usbasp
         Description     : USBasp, http://www.fischl.de/usbasp/

avrdude: set SCK frequency to 187500 Hz
avrdude: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.00s

avrdude: Device signature = 0x1e930f (probably m88p)
avrdude: safemode: hfuse reads as CC
avrdude: safemode: efuse reads as F9

avrdude: safemode: hfuse reads as CC
avrdude: safemode: efuse reads as F9
avrdude: safemode: Fuses OK (E:F9, H:CC, L:7F)

avrdude done.  Thank you.


    _______________________________________________________

Reply to this item at:

  <http://savannah.nongnu.org/bugs/?45115>

_______________________________________________
  Message sent via/by Savannah
  http://savannah.nongnu.org/