bug-auctex
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Tao Chen] Re: [Bug-AUCTeX] rel-0-9-1; Descriptions after the first figu


From: David Kastrup
Subject: [Tao Chen] Re: [Bug-AUCTeX] rel-0-9-1; Descriptions after the first figure can't be previewed
Date: Tue, 05 Apr 2005 17:51:20 +0200
User-agent: Gnus/5.11 (Gnus v5.11) Emacs/22.0.50 (gnu/linux)

Please keep the bug list copied in your replies.  I am forwarding this
manually so that the reference remains.

With the given document, I fail to get any problem.  So please also
post the resulting run log (this is in the buffer you get with C-c
C-l).

One thing that might be worth noting is that you are using a
devastatingly outdated version of AUCTeX that we stopped supporting
several years ago.  Whether this is related, I have no idea.  The run
log would help in figuring that out, but since it is reasonably easy
to upgrade AUCTeX for most Linux distributions (there are ready
packages for Debian, Fedora, SuSE and most other systems), I'd
recommend doing that, anyway, not just because of preview-latex.  For
example, with current versions of AUCTeX, you can use PDFLaTeX easily,
even with preview-latex!

--- Begin Message --- Subject: Re: [Bug-AUCTeX] rel-0-9-1; Descriptions after the first figure can't be previewed Date: Tue, 05 Apr 2005 17:14:07 +0200
David Kastrup wrote:

>
>Well, I am currently in a rather bad mood since in a fit of stupidity
>I debugged this for at least an hour.
>
>Let me give you some advice (and I hope that I will remember it
>myself): if you are experiencing a problem with preview-latex, it is a
>good idea to check that the document would compile without using
>preview-latex in the first place.
>
>Try \usepackage{graphicx} in your preamble.  If you excuse me, I have
>to go bang my head against the wall for some more time.
>
>  
>
Dear David,

Thank you very much for the great effort!

I am sorry for my mistake. I added the sentence "\usepackage{graphicx}" 
in the preamble just now, but the problem is the same. Actually I had 
such a sentence in my original source file, I deleted it to get the 
simplest source file. With this sentence added, the source file can now 
be compiled  correctly by latex, but the preview problem still exists. 
The error message it gives is : error in process sentinel: End of 
Preview snippet 5 unexpected

The source file and the bug report are in the below. It seems to me that 
the bug report is the same as the previous one. I know little  about 
lisp, and can do nothing on it.....

Best Regards,
Tao

-------------------------------------------------------------------------
Below is the source file that I am using now
-------------------------------------------------------------------------
\documentclass[a4paper,11pt]{article}
\usepackage{graphicx}
 

\title{ The Viability Report }
\date{March, 2005}

\begin{document}

\listoffigures

\section{Introduction}
\label{sec:introduction}

\section{The Novice Calibration Method}
\label{sec:description}

\begin{figure}[htbp]
\includegraphics[width=0.9\textwidth]{unsorted}
\caption{The unsorted figure} \label{fig:unsorted}
\end{figure}


\section{conclusion}

\end{document}

-------------------------------------------------------------------------
Below is the bug report.
-------------------------------------------------------------------------
Emacs  : GNU Emacs 21.4.1 (i686-pc-linux-gnu, X toolkit, Xaw3d scroll bars)
 of 2005-02-09 on carthago
Package: rel-0-9-1

current state:
==============

Output from running `gs -h':
AFPL Ghostscript 8.50 (2004-12-10)
Copyright (C) 2004 artofcode LLC, Benicia, CA.  All rights reserved.
Usage: gs [switches] [file1.ps file2.ps ...]
Most frequently used switches: (you can use # in place of =)
 -dNOPAUSE           no pause after page   | -q       `quiet', fewer 
messages
 -g<width>x<height>  page size in pixels   | -r<res>  pixels/inch resolution
 -sDEVICE=<devname>  select device         | -dBATCH  exit after last file
 -sOutputFile=<file> select output file: - for stdout, |command for pipe,
                                         embed %d or %ld for page #
Input formats: PostScript PostScriptLevel1 PostScriptLevel2 
PostScriptLevel3 PDF
Default output device: x11
Available devices:
   bbox bit bitcmyk bitrgb bj10e bj200 bjc600 bjc800 bmp16 bmp16m bmp256
   bmp32b bmpgray bmpmono bmpsep1 bmpsep8 cdeskjet cdj550 cdjcolor cdjmono
   cljet5 cljet5c deskjet devicen djet500 epswrite faxg3 faxg32d faxg4 ijs
   jpeg jpeggray laserjet lj5gray lj5mono ljet2p ljet3 ljet3d ljet4 ljet4d
   ljetplus nullpage pbm pbmraw pcx16 pcx24b pcx256 pcxcmyk pcxgray pcxmono
   pdfwrite pgm pgmraw pgnm pgnmraw pj pjxl pjxl300 pkm pkmraw pksm pksmraw
   png16 png16m png256 pngalpha pnggray pngmono pnm pnmraw ppm ppmraw
   psdcmyk psdrgb psgray psmono psrgb pswrite pxlcolor pxlmono spotcmyk
   tiff12nc tiff24nc tiff32nc tiffcrle tiffg3 tiffg32d tiffg4 tiffgray
   tifflzw tiffpack tiffsep uniprint x11 x11alpha x11cmyk x11gray2 x11gray4
   x11mono xcf
Search path:
   . : /freeware/gs/share/ghostscript/8.50/lib :
   /freeware/gs/share/ghostscript/8.50/Resource :
   /freeware/gs/share/ghostscript/fonts
For more information, see /freeware/gs/share/ghostscript/8.50/doc/Use.htm.
Report bugs to address@hidden, using the form in Bug-form.htm.

(setq
 AUC-TeX-version "10.0g"
 LaTeX-command-style '(("." "latex"))
 image-types '(png gif tiff jpeg xpm pbm postscript xbm)
 preview-image-type 'png
 preview-image-creators '((dvipng (open preview-gs-open 
preview-dvipng-process-setup) (place preview-gs-place)
               (close preview-dvipng-close))
              (png (open preview-gs-open) (place preview-gs-place) 
(close preview-gs-close))
              (jpeg (open preview-gs-open) (place preview-gs-place) 
(close preview-gs-close))
              (pnm (open preview-gs-open) (place preview-gs-place) 
(close preview-gs-close))
              (tiff (open preview-gs-open) (place preview-gs-place) 
(close preview-gs-close)))
 preview-dvipng-image-type 'png
 preview-dvipng-command "dvipng -picky -noghostscript %d -o 
\"%m/prev%%03d.png\""
 preview-pdf2dsc-command "pdf2dsc %s.pdf %m/preview.dsc"
 preview-gs-command "gs"
 preview-gs-options '("-q" "-dSAFER" "-dNOPAUSE" "-DNOPLATFONTS" 
"-dPrinted" "-dTextAlphaBits=4" "-dGraphicsAlphaBits=4")
 preview-gs-image-type-alist '((png png "-sDEVICE=png16m") (dvipng png 
"-sDEVICE=png16m") (jpeg jpeg "-sDEVICE=jpeg")
                   (pnm pbm "-sDEVICE=pnmraw") (tiff tiff 
"-sDEVICE=tiff12nc"))
 preview-fast-conversion t
 preview-prefer-TeX-bb nil
 preview-dvips-command "dvips -Pwww -i -E %d -o %m/preview.000"
 preview-fast-dvips-command "dvips -Pwww %d -o %m/preview.ps"
 preview-scale-function 'preview-scale-from-face
 preview-LaTeX-command '("%l 
\"\\nonstopmode\\nofiles\\PassOptionsToPackage{" ("," . 
preview-required-option-list)
             "}{preview}\\AtBeginDocument{\\ifx\\ifPreview\\undefined" 
preview-default-preamble "\\fi}\\input{%t}\"")
 preview-required-option-list '("active" "tightpage" "auctex")
 preview-default-option-list '("displaymath" "floats" "graphics" 
"textmath" "sections" "footnotes")
 preview-default-preamble '("\\RequirePackage[" ("," . 
preview-default-option-list) "]{preview}[2004/11/05]")
 preview-LaTeX-command-replacements nil
 preview-dump-replacements '(preview-LaTeX-command-replacements
                 ("\\`\\([^ ]+\\)\\(\\( -\\([^ 
\"]\\|\"[^\"]*\"\\)*\\)*\\)\\(.*\\)\\'" "\\1 -ini \"&\\1\" "
                  preview-format-name ".ini \\5")
                 )
 preview-undump-replacements '(("\\`\\([^ ]+\\)\\(\\( -\\([^ 
\"]\\|\"[^\"]*\"\\)*\\)*\\).*\\input{\\([^}]*\\)}.*\\'" "\\1 \"&"
                preview-format-name "\" \\5")
                   )
 preview-auto-cache-preamble 'ask
 )





--- End Message ---

-- 
David Kastrup, Kriemhildstr. 15, 44793 Bochum

reply via email to

[Prev in Thread] Current Thread [Next in Thread]