[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Zsh 3 and ${1+"$@"} (Was: [GNU Autoconf 2.53] testsuite.log: 126 fai
From: |
A Braunsdorf |
Subject: |
Re: Zsh 3 and ${1+"$@"} (Was: [GNU Autoconf 2.53] testsuite.log: 126 failures) |
Date: |
Thu, 02 May 2002 09:29:09 -0500 |
In message <address@hidden>, Akim Demaille writes:
>
> Also, I would have liked to see the output of all the commands I sent.
> So, could you run the following, and *all* the output? THanks!
Sure there's a typescript down there. It's a little messy- I don't
have a script cleaner on this thing.
ab
------------------------------------------------------------------------------
Script started on Thu May 2 09:10:39 2002
ether /Users/ab/Desktop/autoconf-2.53a 129 cd bin
ether /Users/ab/Desktop/autoconf-2.53a/bin 130 make
make: Nothing to be done for `all'.
ether /Users/ab/Desktop/autoconf-2.53a/bin 131 sed 5q autom4te
#! /usr/bin/perl -w
# -*- perl -*-
# @configure_input@
eval 'case $# in 0) exec /usr/bin/perl -S "$0";; *) exec /usr/bin/perl -S "$0"
"$@";; esac'
ether /Users/ab/Desktop/autoconf-2.53a/bin 132 cd ../tests
ether /Users/ab/Desktop/autoconf-2.53a/tests 133 sed 5q autom4te
#! /bin/sh
## --------------------- ##
## M4sh Initialization. ##
## --------------------- ##
ether /Users/ab/Desktop/autoconf-2.53a/tests 134 rm /tmp/autoconf.log
rm: /tmp/autoconf.log: No such file or directory
ether /Users/ab/Desktop/autoconf-2.53a/tests 135 ./testsuite -v -x 3
## ------------------------------ ##
## GNU Autoconf 2.53a test suite. ##
## ------------------------------ ##
3. tools.at:122: testing autoconf --trace: user macros...
+ cat
+ set +vx
tools.at:167: autoconf -t TRACE1 -t TRACE2
+ autoconf -t TRACE1 -t TRACE2
--- /dev/null Thu May 2 09:16:58 2002
+++ /Users/ab/Desktop/autoconf-2.53a/tests/testsuite.dir/at-stderr Thu May
2 09:16:58 2002
@@ -0,0 +1 @@
+/Users/ab/Desktop/autoconf-2.53a/bin/autoconf: command not found: autom4te
[295]
--- - Wed Dec 31 19:00:00 1969
+++ /Users/ab/Desktop/autoconf-2.53a/tests/testsuite.dir/at-stdout Thu May
2 09:16:58 2002
@@ -1,18 +1 @@
-configure.ac:6:TRACE1:
-configure.ac:6:TRACE2:
-configure.ac:7:TRACE2:
-configure.ac:10:TRACE1:foo:bar:baz
-configure.ac:10:TRACE2:bar:baz
-configure.ac:11:TRACE1:bar:baz
-configure.ac:11:TRACE2:baz
-configure.ac:11:TRACE1:foo::baz
-configure.ac:11:TRACE2::baz
-configure.ac:12:TRACE1:foo:ACTIVE:baz
-configure.ac:12:TRACE2:ACTIVE:baz
-configure.ac:13:TRACE1:ACTIVE:active
-configure.ac:13:TRACE2:active
-configure.ac:13:TRACE1:foo:active::ACTIVE
-configure.ac:13:TRACE2:active::ACTIVE
-configure.ac:19:TRACE1:foo bar:bar foo
-configure.ac:19:TRACE2:bar foo
tools.at:167: exit code was 1, expected 0
3. tools.at:122: FAILED near `tools.at:167'
## ----------------------------------------------- ##
## ERROR: Suite unsuccessful, 1 of 1 tests failed. ##
## ----------------------------------------------- ##
You may investigate any problem if you feel able to do so, in which
case the test suite provides a good starting point.
Now, failed tests will be executed again, verbosely, and logged
in the file testsuite.log.
## ------------------------------ ##
## GNU Autoconf 2.53a test suite. ##
## ------------------------------ ##
3. tools.at:122: testing autoconf --trace: user macros...
tools.at:167: autoconf -t TRACE1 -t TRACE2
--- /dev/null Thu May 2 09:22:48 2002
+++ /Users/ab/Desktop/autoconf-2.53a/tests/testsuite.dir/at-stderr Thu May
2 09:22:48 2002
@@ -0,0 +1 @@
+/Users/ab/Desktop/autoconf-2.53a/bin/autoconf: command not found: autom4te
[295]
--- - Wed Dec 31 19:00:00 1969
+++ /Users/ab/Desktop/autoconf-2.53a/tests/testsuite.dir/at-stdout Thu May
2 09:22:49 2002
@@ -1,18 +1 @@
-configure.ac:6:TRACE1:
-configure.ac:6:TRACE2:
-configure.ac:7:TRACE2:
-configure.ac:10:TRACE1:foo:bar:baz
-configure.ac:10:TRACE2:bar:baz
-configure.ac:11:TRACE1:bar:baz
-configure.ac:11:TRACE2:baz
-configure.ac:11:TRACE1:foo::baz
-configure.ac:11:TRACE2::baz
-configure.ac:12:TRACE1:foo:ACTIVE:baz
-configure.ac:12:TRACE2:ACTIVE:baz
-configure.ac:13:TRACE1:ACTIVE:active
-configure.ac:13:TRACE2:active
-configure.ac:13:TRACE1:foo:active::ACTIVE
-configure.ac:13:TRACE2:active::ACTIVE
-configure.ac:19:TRACE1:foo bar:bar foo
-configure.ac:19:TRACE2:bar foo
tools.at:167: exit code was 1, expected 0
3. tools.at:122: FAILED near `tools.at:167'
## ------------------------- ##
## testsuite.log is created. ##
## ------------------------- ##
Please send `testsuite.log' and all information you think might help:
To: <address@hidden>
Subject: [GNU Autoconf 2.53a] testsuite.log: 1 failures
ether /Users/ab/Desktop/autoconf-2.53a/tests 136 cat
/tmp/autoconf.log [Aether /Users/ab/Desktop/autoconf-2.53a/tests 136
cat /tmp/autoconf.lo[Kg
autoconf: PATH:
/Users/ab/bin:/custom/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11R6/bin:/etc:.
autoconf: ARG: autom4te
autoconf: ARG: --include
autoconf: ARG: /Users/ab/Desktop/autoconf-2.53a/lib
autoconf: ARG: --language=autoconf
autoconf: ARG: --output=-
autoconf: ARG: --trace=TRACE1
autoconf: ARG: --trace=TRACE2
autoconf: ARG: configure.ac
autoconf: PATH:
/Users/ab/bin:/custom/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11R6/bin:/etc:.
autoconf: ARG: autom4te
autoconf: ARG: --include
autoconf: ARG: /Users/ab/Desktop/autoconf-2.53a/lib
autoconf: ARG: --language=autoconf
autoconf: ARG: --output=-
autoconf: ARG: --trace=TRACE1
autoconf: ARG: --trace=TRACE2
autoconf: ARG: configure.ac
ether /Users/ab/Desktop/autoconf-2.53a/tests 137 exit
exit
Script done on Thu May 2 09:24:35 2002