[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: coreutils 6.6 fails to compile on IRIX 5.3
From: |
Georg Schwarz |
Subject: |
Re: coreutils 6.6 fails to compile on IRIX 5.3 |
Date: |
Sat, 13 Jan 2007 22:36:21 +0100 |
Am 12.01.2007 um 23:59 schrieb Paul Eggert:
par -sSSl dd if=input of=output
lorenz 7% par -sSSl src/dd if=input of=output
0+0 records in
0+1 records out
0 bytes ( 0mS par( 737): was sent signal SIGUSR1
1mS par( 737): END-pause() errno = 4 (Interrupted system
call)
1mS par( 737): received signal SIGUSR1
1mS par( 737): sigreturn(0x7fffaaa0) OK
2mS dd( 737): execve(src/dd, 0x7fffaf44, 0x7fffaf54) OK
5mS dd( 737): open(/lib/rld, O_RDONLY, 04) = 3
5mS dd( 737): read(3, <7f 45 4c 46 01 02 01 00 00 00 00
00 00 00 00 00>..., 52) = 52
5mS dd( 737): lseek(3, 52, SEEK_SET) = 52
5mS dd( 737): read(3, <70 00 00 00 00 00 00 a0 0f b6 00
a0 0f b6 00 a0>..., 96) = 96
6mS dd( 737): elfmap(3, 0x7fffa25c, 2) = 0xfb60000
6mS dd( 737): close(3) OK
6mS dd( 737): getpagesize() = 4096
7mS dd( 737): getpagesize() = 4096
7mS dd( 737): open(/dev/zero, O_RDONLY, 01757000370) = 3
7mS dd( 737): mmap(0xfbc1000, 28672, PROT_WRITE|
PROT_READ, MAP_PRIVATE, 3, 0) = 0xfbc1000
7mS dd( 737): close(3) OK
9mS dd( 737): open(/usr/local/lib/libintl.so.9,
O_RDONLY, 05) = 3
9mS dd( 737): read(3, <7f 45 4c 46 01 02 01 00 00 00 00
00 00 00 00 00>..., 1024) = 1024
9mS dd( 737): elfmap(3, 0xfbc38c8, 2) = 0x5ffe0000
10mS dd( 737): close(3) OK
11mS dd( 737): getpid() = 737 ppid=736
12mS dd( 737): syssgi(SGI_TOSSTSAVE) OK
13mS dd( 737): getpagesize() = 4096
13mS dd( 737): brk(0x10004000) OK
14mS dd( 737): getpagesize() = 4096
15mS dd( 737): close(0) OK
15mS dd( 737): open(input, O_RDONLY, 0) = 0
16mS dd( 737): lseek(0, 0, SEEK_CUR) = 0
16mS dd( 737): close(1) OK
16mS dd( 737): open(output, O_WRONLY|O_CREAT|O_TRUNC,
0666) = 1
16mS dd( 737): sigaction(SIGUSR1, 0, flags=0
handler=SIG_DFL mask=<NO_SIGNALS>, 0xfad592c) OK
17mS dd( 737): sigaction(SIGINT, 0, flags=0
handler=SIG_DFL mask=<NO_SIGNALS>, 0xfad592c) OK
17mS dd( 737): sigaction(SIGUSR1, flags=0
handler=0x404154 mask=INT USR1, 0, 0xfad592c) OK
17mS dd( 737): sigaction(SIGINT, flags=SA_RESETHAND|
SA_NODEFER handler=0x4040f0 mask=INT USR1, 0, 0xfad592c) OK
17mS dd( 737): gettimeofday(sec=1168723901 usec=971398) OK
17mS dd( 737): brk(0x10005000) OK
17mS dd( 737): brk(0x10006000) OK
18mS dd( 737): read(0, "data\n", 512) = 5
18mS dd( 737): read(0, 0x10003000, 512) = 0
18mS dd( 737): write(1, "data\n", 5) = 5
66mS dd( 737): close(0) OK
66mS dd( 737): close(1) OK
66mS dd( 737): gettimeofday(sec=1168723902 usec=21008) OK
67mS dd( 737): getuid() = 1110 euid=1110
67mS dd( 737): getuid() = 1110 euid=1110
67mS dd( 737): getgid() = 20 egid=20
67mS dd( 737): getgid() = 20 egid=20
67mS dd( 737): write(2, "0+0 reco", 8) = 8
68mS dd( 737): write(2, "rds in\n", 7) = 7
68mS dd( 737): write(2, "0+1 reco", 8) = 8
68mS dd( 737): write(2, "rds out\n", 8) = 8
69mS dd( 737): write(2, "0 bytes ", 8) = 8
69mS dd( 737): write(2, "(", 1) = 1
69mS dd( 737): was sent signal SIGSEGV
70mS dd( 737): received signal SIGSEGV
read : 5 times
write : 7 times
open : 5 times
close : 7 times
brk : 3 times
lseek : 2 times
getpid : 1 times
getuid : 2 times
syssgi : 3 times
getgid : 2 times
sysmp : 4 times
execve : 1 times
sigreturn : 1 times
gettimeofday : 2 times
mmap : 1 times
sigaction : 4 times
is this of help to you?
without par:
lorenz 24% src/dd if=input of=output
0+0 records in
0+1 records out
0 bytes (Segmentation fault (core dumped)
lorenz 25%
BTW, the following works fine:
lorenz 9% src/dd --version
dd (coreutils) 6.7-dirty
Copyright (C) 2007 Free Software Foundation, Inc.
This is free software. You may redistribute copies of it under the
terms of
the GNU General Public License <http://www.gnu.org/licenses/gpl.html>.
There is NO WARRANTY, to the extent permitted by law.
Written by Paul Rubin, David MacKenzie, and Stuart Kemp.
I'll try to get some older versions of gdb working, the latest one at
least does unfortunately not compile.
--
Georg Schwarz http://home.pages.de/~schwarz/
address@hidden +49 151 11559652
- Re: coreutils 6.6 fails to compile on IRIX 5.3, (continued)
- Message not available
- Message not available
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Paul Eggert, 2007/01/03
- Message not available
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Paul Eggert, 2007/01/04
- Message not available
- Message not available
- Message not available
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Paul Eggert, 2007/01/05
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Georg Schwarz, 2007/01/06
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Jim Meyering, 2007/01/06
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Georg Schwarz, 2007/01/07
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Paul Eggert, 2007/01/07
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Georg Schwarz, 2007/01/12
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Paul Eggert, 2007/01/12
- Re: coreutils 6.6 fails to compile on IRIX 5.3,
Georg Schwarz <=
- Re: coreutils 6.6 fails to compile on IRIX 5.3, Jim Meyering, 2007/01/13