Re: [Bug-ddrescue] Cannot abort reading from faulty device

[Antonio Diaz Diaz]

address@hidden wrote:
> I also noticed for that very device that the slow-read definition
> -a5000000 , which should define<  5MBs as slow read from my
> understanding, and a current speed of less than 100KBs the "slow read"
> counter is stuck at 0.

Thanks. Take into account that slow reads starts counting after 30 
seconds (see --delay-slow), and are only counted during passes 1 and 2. 
Passes 3 to 5 just read the drive at whatever speed it delivers. Surely 
this needs to be better documented.


Best regards,
Antonio.