[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: GRUB GRUB GRUB etc
From: |
Titus Winters |
Subject: |
Re: GRUB GRUB GRUB etc |
Date: |
Tue, 1 Oct 2002 23:37:30 -0700 |
User-agent: |
Mutt/1.3.25i |
Well, emerge might not be actually setting your computer up to use
the newly compiled GRUB as your bootloader. (Possibly, I'm not a
gentoo user.) Try running
# /usr/local/sbin/grub-install /dev/hda
or
# /usr/sbin/grub-install /dev/hda
(depending on where the script gets installed to.)
Then cross your fingers, reboot, and give it a shot.
-Titus
On (10/02 01:51), Chris Synan wrote:
> I am booting to the Gentoo 1.4 CD, then chroot
>
> please keep in mind alot of this stuff is somewhat over my head so if i
> dont make sense, ask again and i'll do my best to clarify
>
> I am not running grub-install but I can only assume that "emerge" the
> gentoo package tool IS.
>
> I have had several people look at my menu.lst and grub.conf and fstab
> and fdisk etc.etc. and i think we are in agreement that that stuff is ok
> now. but still all I get is GRUB GRUB GRUB GRUB
>
> I am compiling with emerge, it downloads source and compiles it from an
> ".ebuild" script, best as i understand it. I have tried .90 and .92
> with same results.
>
> Like i said, at first my CFLAGS was "-march=pentium3 -O3 -pipe" first I
> removed the -O3 and tried again. Then I also removed the march part
> leaving only "-pipe"
>
> still none of these options work.. including stripping the machine
> bare. also this guy on #gentoo has the same mobo as me so i guess we
> rule that out.
>
> The ebuild release is .90r7 i beileve, also we have tried .92
>
> thanks!!
>
>
>
> On Wed, 2002-10-02 at 06:18, Titus Winters wrote:
> > Uh . . hmm. Let me ask some silly questions to make sure we are
> > on the same page.
> >
> > - How are you booting to recompile / reinstall Grub?
> > - You are running grub-install after recompiling, right? (make install
> > doesn't do it)
> > - What commands are you using to do the recompile? Any configuration
> > options?
> > - Is there a Portage release for GRUB? What version is that?
> >
> > -Titus
> >
> > On (10/02 00:08), Chris Synan wrote:
> > > I am on .90
> > >
> > > I have spent countless hours trying to fix this, i have stumped 100's of
> > > people on the #gentoo
> > >
> > > Any ideas would be GREATLY appreciated!!
> > >
> > > thanks
> > >
> > > PS i have removed all drives except the IDE and still doesnt work,, i
> > > have recompiled grub with no CFLAGS except "-pipe".. NOTHING
> > >
> > > Thanks
> > >
> > >
> > >
> > > On Thu, 2002-09-26 at 05:09, Titus Winters wrote:
> > > > What version of Grub did you install? I've had similar problems with
> > > > the 0.92 release, but using 0.91 or even 0.90 seemed to clear it up.
> > > >
> > > > -Titus
> > > >
> > > > On (09/25 23:06), Chris Synan wrote:
> > > > > Hi,
> > > > >
> > > > > I have just installed Gentoo and Grub.
> > > > >
> > > > > When I reboot I don't get the "Stage 1.5" message. Instead all I get
> > > > > is
> > > > >
> > > > > GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB
> > > > > GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB
> > > > > GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB GRUB
> > > > > GRUB GRUB GRUB GRUB GRUB GRUB ...
> > > > >
> > > > > well, you get the point.
> > > > >
> > > > > anyway, I have done alot of digging around on google and IRC and i
> > > > > find
> > > > > hints of the problem? Some other people have had this problem when
> > > > > they
> > > > > have SCSI RAID and IDE drives on the machine. That is what I have
> > > > > also.. but I removed the SCSI card and still get the same error.
> > > > >
> > > > > I am confident that my menu.lst is set up properly, because I have
> > > > > installed GRUB on a few other machines and it has worked OK.
> > > > >
> > > > > Here are some stats of the machine:
> > > > >
> > > > > PIII 800 512mb ram
> > > > > Adaptec AAA 131 SCSI RAID (only supports MS) 2x IBM drives
> > > > > WD IDE drive (w/ gentoo)
> > > > > ASUS CUSL2 Mobo
> > > > >
> > > > > on the gentoo drive
> > > > > /dev/hda1 = boot
> > > > > /dev/hda2 = swap
> > > > > /dev/hda3 = root
> > > > >
> > > > > menu.lst:
> > > > >
> > > > > root (hd0,0)
> > > > > kernel /boot/bzImage root=/dev/hda3
> > > > >
> > > > >
> > > > >
> > > > > if anyone has seen this or has any idea how to fix, I would love to
> > > > > hear
> > > > > it!! thanks,
> > > > >
> > > > > chris
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > Bug-grub mailing list
> > > > > address@hidden
> > > > > http://mail.gnu.org/mailman/listinfo/bug-grub
> > > >
> > > > --
> > > > Free peoples, be mindful of this maxim: "Liberty may be gained,
> > > > but can never be recovered."
> > > > - Jean Jaques Rousseau
> > > >
> > >
> > >
> > >
> > >
> > > _______________________________________________
> > > Bug-grub mailing list
> > > address@hidden
> > > http://mail.gnu.org/mailman/listinfo/bug-grub
> >
> > --
> > Free peoples, be mindful of this maxim: "Liberty may be gained,
> > but can never be recovered."
> > - Jean Jaques Rousseau
> >
>
--
Free peoples, be mindful of this maxim: "Liberty may be gained,
but can never be recovered."
- Jean Jaques Rousseau