bug#22420: Zsh test failure

[Leo Famulari]

On Fri, Jan 22, 2016 at 04:04:35PM +0100, Ludovic Courtès wrote:
> Leo Famulari <address@hidden> skribis:
> 
> > On Thu, Jan 21, 2016 at 10:02:53PM +0100, Ludovic Courtès wrote:
> >> Leo Famulari <address@hidden> skribis:
> >> 
> >> > Zsh fails to build due to a test failure on my system (x86_64).
> >> >
> [...]
> 
> What system are you using?

It's an up-to-date Debian testing with this uname:
Linux host 4.3.0-1-amd64 #1 SMP Debian 4.3.3-5 (2016-01-04) x86_64 GNU/Linux

I have a machine with different hardware but the same arch, same OS
version (but different setup) and same kernel config, and it built fine
there. I can also build it in an up-to-date QEMU x86_64 image of GuixSD. 

> 
> > I have confirmed the failure is in 'Test/B02typeset.ztst'.
> 
> Could you post the relevant part of the build log?

Here is the verbose output of only the B02 test:
http://paste.debian.net/367077/

And the non-verbose output of the entire test suite (the full verbose
log is ~40000 lines):

phase `build' succeeded after 45.8 seconds
starting phase `check'
cd Test ; make check
make[1]: Entering directory '/tmp/guix-build-zsh-5.1.1.drv-0/zsh-5.1.1/Test'
if test -n "gcc"; then \
  cd .. && DESTDIR= \
  make MODDIR=`pwd`/Test/Modules install.modules > /dev/null; \
fi
if ZTST_testlist="`for f in ./*.ztst; \
           do echo $f; done`" \
 ZTST_srcdir="." \
 ZTST_exe=../Src/zsh \
 ../Src/zsh +Z -f ./runtests.zsh; then \
 stat=0; \
else \
 stat=1; \
fi; \
sleep 1; \
rm -rf Modules .zcompdump; \
exit $stat
./A01grammar.ztst: starting.
This test hangs the shell when it fails...
./A01grammar.ztst: all tests successful.
./A02alias.ztst: starting.
This test hangs the shell when it fails...
./A02alias.ztst: all tests successful.
./A03quoting.ztst: starting.
./A03quoting.ztst: all tests successful.
./A04redirect.ztst: starting.
./A04redirect.ztst: all tests successful.
./A05execution.ztst: starting.
Unable to change MONITOR option
This test takes 5 seconds to fail...
Skipping pipe leak test, requires MONITOR option
This test takes 3 seconds and hangs the shell when it fails...
./A05execution.ztst: all tests successful.
./A06assign.ztst: starting.
./A06assign.ztst: all tests successful.
./A07control.ztst: starting.
./A07control.ztst: all tests successful.
./B01cd.ztst: starting.
./B01cd.ztst: all tests successful.
./B02typeset.ztst: starting.
./ztst.zsh:540: parse error near `*'
./B03print.ztst: starting.
./B03print.ztst: all tests successful.
./B04read.ztst: starting.
./B04read.ztst: all tests successful.
./B05eval.ztst: starting.
./B05eval.ztst: all tests successful.
./B06fc.ztst: starting.
./B06fc.ztst: all tests successful.
./B07emulate.ztst: starting.
./B07emulate.ztst: all tests successful.
./B08shift.ztst: starting.
./B08shift.ztst: all tests successful.
./C01arith.ztst: starting.
./C01arith.ztst: all tests successful.
./C02cond.ztst: starting.
Warning: Not testing [[ -b blockdevice ]] (no devices found)
Warning: Not testing [[ -f blockdevice ]] (no devices found)
This test takes two seconds...
./C02cond.ztst: all tests successful.
./C03traps.ztst: starting.
This test takes at least three seconds...
This test, too, takes at least three seconds...
Another test that takes three seconds
./C03traps.ztst: all tests successful.
./C04funcdef.ztst: starting.
./C04funcdef.ztst: all tests successful.
./C05debug.ztst: starting.
./C05debug.ztst: all tests successful.
./D01prompt.ztst: starting.
./D01prompt.ztst: all tests successful.
./D02glob.ztst: starting.
./D02glob.ztst: all tests successful.
./D03procsubst.ztst: starting.
./D03procsubst.ztst: all tests successful.
./D04parameter.ztst: starting.
./D04parameter.ztst: all tests successful.
./D05array.ztst: starting.
./D05array.ztst: all tests successful.
./D06subscript.ztst: starting.
./D06subscript.ztst: all tests successful.
./D07multibyte.ztst: starting.
Testing multibyte with locale en_US.UTF-8
./D07multibyte.ztst: all tests successful.
./D08cmdsubst.ztst: starting.
./D08cmdsubst.ztst: all tests successful.
./D09brace.ztst: starting.
./D09brace.ztst: all tests successful.
./E01options.ztst: starting.
This test hangs the shell when it fails...
./E01options.ztst: all tests successful.
./E02xtrace.ztst: starting.
./E02xtrace.ztst: all tests successful.
./V01zmodload.ztst: starting.
./V01zmodload.ztst: all tests successful.
./V02zregexparse.ztst: starting.
./V02zregexparse.ztst: all tests successful.
./V03mathfunc.ztst: starting.
./V03mathfunc.ztst: all tests successful.
./V04features.ztst: starting.
./V04features.ztst: all tests successful.
./V05styles.ztst: starting.
./V05styles.ztst: all tests successful.
./V06parameter.ztst: starting.
./V06parameter.ztst: all tests successful.
./V07pcre.ztst: starting.
Testing PCRE multibyte with locale en_US.UTF-8
./V07pcre.ztst: all tests successful.
./V08zpty.ztst: starting.
./V08zpty.ztst: all tests successful.
./V09datetime.ztst: starting.
Test case skipped: Japanese UTF-8 locale not supported
./V09datetime.ztst: all tests successful.
./W01history.ztst: starting.
./W01history.ztst: all tests successful.
./X02zlevi.ztst: starting.
./X02zlevi.ztst: all tests successful.
./Y01completion.ztst: starting.
./Y01completion.ztst: all tests successful.
./Y02compmatch.ztst: starting.
./Y02compmatch.ztst: all tests successful.
./Y03arguments.ztst: starting.
./Y03arguments.ztst: all tests successful.
**************************************
44 successful test scripts, 1 failure, 0 skipped
**************************************
Makefile:189: recipe for target 'check' failed
make[1]: *** [check] Error 1
make[1]: Leaving directory '/tmp/guix-build-zsh-5.1.1.drv-0/zsh-5.1.1/Test'
Makefile:265: recipe for target 'check' failed
make: *** [check] Error 2
phase `check' failed after 30.2 seconds