bug#24087: recovery from suspend is broken with recent libreboot + linux-libre 4.7

[ng0]

This is the boot up messages of one of the affected (running GuixSD)
devices. As I was assured this is a GuixSD specific problem, parabola,
trisquel and others do behave as expected (recover from
suspend/hibernate works).


Jul 28 15:32:29 localhost vmunix: [    0.000000] KERNEL supported cpus:
Jul 28 15:32:29 localhost vmunix: [    0.000000]   Intel GenuineIntel
Jul 28 15:32:29 localhost vmunix: [    0.000000]   AMD AuthenticAMD
Jul 28 15:32:29 localhost vmunix: [    0.000000]   Centaur CentaurHauls

I am used to individual configured kernels, so this might be just my
impression. Should this not be more specific, include core2 etc, or is
this just a listing of vendors there and not the cpu selection I
remember from the makemenuconfig dialog?

Then further on there's a call trace, this will be pasted here and leave
out some lines because I don't like to be that transparent in clear
public communication about my hardware.  Then again I don't know how
much this will tell, so if anyone says it's easier to debug with the
full information provided, I could do so.  This trace happens every time
I boot:

Jul 28 15:32:36 localhost vmunix: [    0.000000] ------------[ cut here 
]------------
Jul 28 15:32:36 localhost vmunix: [    0.000000] WARNING: CPU: 0 PID: 0 at 
drivers/iommu/dmar.c:830 warn_invalid_dmar.part.7+0x78/0x90
Jul 28 15:32:36 localhost vmunix: [    0.000000] Your BIOS is broken; DMAR 
reported at address fed92000 returns all ones!
-- snip for bios vendor etc etc --
Jul 28 15:32:37 localhost vmunix: [    0.000000] Modules linked in:
Jul 28 15:32:37 localhost vmunix: [    0.000000] CPU: 0 PID: 0 Comm: swapper 
Not tainted 4.7.0-gnu #1
-- snip for hardware name etc --
Jul 28 15:32:37 localhost vmunix: [    0.000000] Call Trace:
Jul 28 15:32:37 localhost vmunix: [    0.000000]  [<ffffffff813dce53>] 
dump_stack+0x63/0x90
Jul 28 15:32:37 localhost vmunix: [    0.000000]  [<ffffffff81080ef1>] 
__warn+0xd1/0xf0
Jul 28 15:32:38 localhost vmunix: [    0.000000]  [<ffffffff81080fe7>] 
warn_slowpath_fmt_taint+0x57/0x70
Jul 28 15:32:38 localhost vmunix: [    0.000000]  [<ffffffff81fa81fc>] ? 
__early_ioremap+0x14b/0x1d2
Jul 28 15:32:38 localhost vmunix: [    0.000000]  [<ffffffff815271b8>] 
warn_invalid_dmar.part.7+0x78/0x90
Jul 28 15:32:38 localhost vmunix: [    0.000000]  [<ffffffff8181e524>] 
dmar_validate_one_drhd+0x84/0xe0
Jul 28 15:32:38 localhost vmunix: [    0.000000]  [<ffffffff81526b53>] 
dmar_walk_remapping_entries+0x83/0x1a0
Jul 28 15:32:38 localhost vmunix: [    0.000000]  [<ffffffff81fc612c>] 
detect_intel_iommu+0x5f/0xf2
Jul 28 15:32:38 localhost vmunix: [    0.000000]  [<ffffffff8181e4a0>] ? 
xen_swiotlb_init+0x4b0/0x4b0
Jul 28 15:32:39 localhost vmunix: [    0.000000]  [<ffffffff81f8124e>] 
pci_iommu_alloc+0x4a/0x6c
Jul 28 15:32:39 localhost vmunix: [    0.000000]  [<ffffffff81f907a3>] 
mem_init+0x11/0xa3
Jul 28 15:32:39 localhost vmunix: [    0.000000]  [<ffffffff81f71dc9>] 
start_kernel+0x230/0x489
Jul 28 15:32:39 localhost vmunix: [    0.000000]  [<ffffffff81f71120>] ? 
early_idt_handler_array+0x120/0x120
Jul 28 15:32:39 localhost vmunix: [    0.000000]  [<ffffffff81f71481>] 
x86_64_start_reservations+0x2f/0x31
Jul 28 15:32:39 localhost vmunix: [    0.000000]  [<ffffffff81f715cd>] 
x86_64_start_kernel+0x14a/0x16d
Jul 28 15:32:39 localhost vmunix: [    0.000000] ---[ end trace 
e301e3fe181525a1 ]---


Moving on:

Jul 28 15:32:43 localhost vmunix: [    0.040144] DMAR: Host address width 36
Jul 28 15:32:44 localhost vmunix: [    0.040150] DMAR: DRHD base: 
0x000000fed90000 flags: 0x0
Jul 28 15:32:44 localhost vmunix: [    0.040166] DMAR: dmar0: reg_base_addr 
fed90000 ver 1:0 cap c9008020e30260 ecap 1000
Jul 28 15:32:44 localhost vmunix: [    0.040175] DMAR: DRHD base: 
0x000000fed91000 flags: 0x0
Jul 28 15:32:44 localhost vmunix: [    0.040184] DMAR: dmar1: reg_base_addr 
fed91000 ver 1:0 cap c0000020630260 ecap 1000
Jul 28 15:32:44 localhost vmunix: [    0.040193] DMAR: DRHD base: 
0x000000fed92000 flags: 0x0
Jul 28 15:32:44 localhost vmunix: [    0.040207] DMAR: Failed to map dmar2
Jul 28 15:32:44 localhost vmunix: [    0.040212] DMAR: Parse DMAR table failure.

Then there are some lines about some devices and  "System wakeup disabled by 
ACPI"

...

Jul 28 15:33:01 localhost vmunix: [    0.482055] ACPI Exception: AE_NOT_FOUND, 
Error reading AC Adapter state (20160422/ac-128)
Jul 28 15:33:01 localhost vmunix: [    0.482218] input: Sleep Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0E:00/input/input0
Jul 28 15:33:01 localhost vmunix: [    0.482290] ACPI: Sleep Button [SLPB]
Jul 28 15:33:01 localhost vmunix: [    0.482388] input: Lid Switch as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2a/PNP0C09:00/PNP0C0D:00/input/input1
Jul 28 15:33:01 localhost vmunix: [    0.482578] ACPI: Lid Switch [LID] Jul 28 
15:33:01 localhost vmunix: [    0.482680] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
Jul 28 15:33:02 localhost vmunix: [    0.482732] ACPI: Power Button [PWRF]
Jul 28 15:33:02 localhost vmunix: [    0.484295] tsc: Marking TSC unstable due 
to TSC halts in idle
Jul 28 15:33:02 localhost vmunix: [    0.486639] thermal LNXTHERM:00: 
registered as thermal_zone0
Jul 28 15:33:02 localhost vmunix: [    0.486685] ACPI: Thermal Zone [THM0] (32 
C)
Jul 28 15:33:02 localhost vmunix: [    0.488684] thermal LNXTHERM:01: 
registered as thermal_zone1
Jul 28 15:33:02 localhost vmunix: [    0.489901] ACPI: Thermal Zone [THM1] (29 
C)
Jul 28 15:33:02 localhost vmunix: [    0.491148] GHES: HEST is not enabled!

...


Jul 28 15:33:16 localhost vmunix: [    7.389127] acpi device:04: registered as 
cooling_device2
Jul 28 15:33:16 localhost vmunix: [    7.389897] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
Jul 28 15:33:16 localhost vmunix: [    7.546204] ACPI Warning: SystemIO range 
0x0000000000000528-0x000000000000052F conflicts with OpRegion 
0x0000000000000500-0x000000000000057F (\PMIO) (20160422/utaddress-255)
Jul 28 15:33:17 localhost vmunix: [    7.547836] ACPI: If an ACPI driver is 
available for this device, you should use it instead of the native driver
Jul 28 15:33:17 localhost vmunix: [    7.548752] ACPI Warning: SystemIO range 
0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 
0x0000000000000580-0x00000000000005BE (\GPCM) (20160422/utaddress-255)
Jul 28 15:33:17 localhost vmunix: [    7.550626] ACPI Warning: SystemIO range 
0x00000000000005B0-0x00000000000005BF conflicts with OpRegion 
0x0000000000000580-0x00000000000005BB (\GPIO) (20160422/utaddress-255)
Jul 28 15:33:17 localhost vmunix: [    7.552731] ACPI: If an ACPI driver is 
available for this device, you should use it instead of the native driver
Jul 28 15:33:17 localhost vmunix: [    7.553853] ACPI Warning: SystemIO range 
0x0000000000000580-0x00000000000005AF conflicts with OpRegion 
0x0000000000000580-0x00000000000005BE (\GPCM) (20160422/utaddress-255)
Jul 28 15:33:17 localhost vmunix: [    7.556230] ACPI Warning: SystemIO range 
0x0000000000000580-0x00000000000005AF conflicts with OpRegion 
0x0000000000000580-0x00000000000005BB (\GPIO) (20160422/utaddress-255)
Jul 28 15:33:17 localhost vmunix: [    7.558815] ACPI: If an ACPI driver is 
available for this device, you should use it instead of the native driver
Jul 28 15:33:17 localhost vmunix: [    7.560144] lpc_ich: Resource conflict(s) 
found affecting gpio_ich
Jul 28 15:33:18 localhost vmunix: [    7.670414] Non-volatile memory driver v1.3

...

Jul 28 15:33:23 localhost vmunix: [    9.259071] i915 0000:00:02.0: Invalid PCI 
ROM header signature: expecting 0xaa55, got 0x0000
Jul 28 15:33:23 localhost vmunix: [    9.259077] [drm] failed to find VBIOS 
tables
Jul 28 15:33:23 localhost vmunix: [    9.259614] vgaarb: device changed 
decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem

...

Jul 28 15:33:24 localhost vmunix: [    9.398653] [drm] RC6 disabled, disabling 
runtime PM support
Jul 28 15:33:24 localhost vmunix: [    9.398720] [drm] Initialized i915 1.6.0 
20160425 for 0000:00:02.0 on minor 0
Jul 28 15:33:24 localhost vmunix: [   10.153770] intel_powerclamp: No package 
C-state available
Jul 28 15:33:25 localhost vmunix: [   10.276405] intel_powerclamp: No package 
C-state available


-- 
♥Ⓐ  ng0
Current Keys: https://we.make.ritual.n0.is/ng0.txt
For non-prism friendly talk find me on http://www.psyced.org