[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bug-xnee] "WARNING: Enough valuators ... still not printing" - what
From: |
Henrik Sandklef |
Subject: |
Re: [Bug-xnee] "WARNING: Enough valuators ... still not printing" - what does it mean? |
Date: |
Tue, 17 Apr 2012 08:40:58 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
Thanks, for your quick reply
Now the checksum of the tar is the same as on sandklef.com and I've
managed to download and unpack it.
Don't know what went wrong.
/h
On Tue, Apr 17, 2012 at 03:09:56AM +0000, L. Rahyen wrote:
> > New unofficial release here:
> > http://www.sandklef.com/test/xnee-3.11.90.tar.gz
> It seems to be broken:
>
> % tar -xzf xnee-3.11.90.tar.gz
>
> gzip: stdin: unexpected end of file
> tar: Unexpected EOF in archive
> tar: Unexpected EOF in archive
> tar: Error is not recoverable: exiting now
>
> Please re-upload it. Thanks again for spending your time to fix this
> bug.
>
> > On Thu, Feb 23, 2012 at 12:50:21PM +0100, Henrik Sandklef wrote:
> > > On Wed, Jan 18, 2012 at 10:41:19PM +0000, L. Rahyen wrote:
> > > > When I run:
> > > > cnee --record --keyboard
> > > >
> > > > I get "WARNING: Enough valuators ... still not printing" after
> > > > every
> > > > event. What does this mean?
> > > >
> > > > Also, empty mouse motion events are recorded in the form of
> > > > "0,100,0,0,0,0,0,LARGE_NUMBER", and I want to record keyboard-only
> > > > events.
> > >
> > > This does not look like a mouse event (shouldn't say 100 in the second
> > > column). It does however look like a bug :(
> > >
> > > > By
> > > > the way, with "--mouse" option empty mouse motion events are also
> > > > recorded, but
> > > > useful mouse motion events are recorded too (like
> > > > "0,6,336,895,0,0,0,LARGE_NUMBER"). It looks like there is a bug
> > > > somewhere, but
> > > > perhaps I'm doing something wrong?
> > >
> > > This looks like a "classic" mouse event. With classic I mean that it
> > > is not an X Input event (which in the first column says 6 or 7).
> > >
> > > How did you get Xnee (3.11)? From your distribution or did you compile it
> > > from source?
> > >
> > > Your log file says "XI2 not supported." and then it seems to be
> > > recording XI anyhow. This is odd.
> > >
> > > Do you have XI? Try doing this to check:
> > > xdpyinfo | grep -i inputext
> > >
> > > > I have attached log file. First, I run "cnee --record
> > > > --keyboard", then
> > > > press Shift, then move my mouse a bit, then press Ctrl+C. Expected
> > > > result is no
> > > > empty mouse motion events (especially without "--mouse" option), and no
> > > > WARNINGs, and no segfault when I press Ctrl+C. Instead I got what is
> > > > shown in
> > > > the log.
> > >
> > > Try using "-sk q". This makes Xnee stop recording when you press q.
> > >
> > > /hesa
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > > % cnee --record --keyboard
> > > > XI2 not supported.
> > > > Failed finding X Input extension devices
> > > > XI2 not supported.
> > > > Failed finding X Input extension devices
> > > > XI2 not supported.
> > > > NOTIFICATION: If you have problem with Xnee and recording device
> > > > events: File a bug report including this text.
> > > > NOTIFICATION: If you have problem with Xnee and recording device
> > > > events: File a bug report including this text.
> > > > Workaround: Creating context on data display instead of control
> > > > You can ignore this message
> > > > ####################################
> > > > # System information #
> > > > ####################################
> > > > # Date: 2012:01:18
> > > > # Time: 21:29:39
> > > > # Xnee program: cnee
> > > > # Xnee version: 3.11
> > > > # Xnee home: http://www.gnu.org/software/xnee/
> > > > # Xnee info mailing list: address@hidden
> > > > # Xnee bug mailing list: address@hidden
> > > > # X version: 11
> > > > # X revision: 0
> > > > # X vendor: The X.Org Foundation
> > > > # X vendor release: 11102902
> > > > # Record version major: 1
> > > > # Record version minor: 13
> > > > # OS name: Linux
> > > > # OS Release: 3.1.0-1-amd64
> > > > # OS Version: #1 SMP Tue Jan 10 05:01:58 UTC 2012
> > > > # Machine: x86_64
> > > > # Nodename: comp
> > > > # Display name: :0
> > > > # Dimension: 3120x1050
> > > >
> > > >
> > > >
> > > > ##############################################
> > > > # Xnee application arguments #
> > > > ##############################################
> > > > # cnee --record --keyboard
> > > >
> > > >
> > > > ##############################################
> > > > # Displays #
> > > > ##############################################
> > > > # display :0
> > > > # distribute
> > > >
> > > >
> > > > ##############################################
> > > > # Files #
> > > > ##############################################
> > > > # out-file stdout
> > > > # err-file stderr
> > > >
> > > >
> > > > ##############################################
> > > > # Key Grabs #
> > > > ##############################################
> > > > # stop-key 0
> > > > # pause-key 0
> > > > # resume-key 0
> > > > # insert-key 0
> > > > # exec-key 0
> > > > # exec-program-key xnee-exec-no-program
> > > >
> > > >
> > > > ##############################################
> > > > # Recording limits etc #
> > > > ##############################################
> > > >
> > > > events-to-record -1
> > > > data-to-record -1
> > > > seconds-to-record -1
> > > > # first-last
> > > >
> > > > # Record all (including current) clients or only future ones
> > > > all-clients
> > > > # future-clients
> > > >
> > > > # Store the starting mouse position
> > > > # store-mouse-position
> > > >
> > > >
> > > > ##############################################
> > > > # Resolution #
> > > > ##############################################
> > > >
> > > > # Resolution
> > > > #recorded-resolution 3120x1050
> > > > #replay-resolution 1x1
> > > > #resolution-adjustment 0
> > > >
> > > >
> > > > ##############################################
> > > > # Speed #
> > > > ##############################################
> > > >
> > > > # Speed
> > > > #speed-percent 100
> > > >
> > > >
> > > > ##############################################
> > > > # Replaying limits etc #
> > > > ##############################################
> > > >
> > > > max-threshold 20
> > > > min-threshold 20
> > > > tot-threshold 40
> > > >
> > > >
> > > > ##############################################
> > > > # Feedback #
> > > > ##############################################
> > > > #feedback-none
> > > > #feedback-stderr
> > > > feedback-xosd
> > > >
> > > >
> > > >
> > > > ##############################################
> > > > # Various #
> > > > ##############################################
> > > >
> > > > # Plugin file
> > > >
> > > > # Modes (currently not used)
> > > > # synchronised-replay
> > > >
> > > > # Replay offset
> > > > #replay-offset 0x0
> > > >
> > > > # Human printout of X11 data (instead of Xnee format)
> > > > # human-printout
> > > >
> > > > # Delay before starting record/replay
> > > > # time 0
> > > >
> > > > # No recording of ReparentNotify
> > > > # no-reparent-recording
> > > >
> > > > # Various
> > > > #########################################
> > > > # Record settings #
> > > > #########################################
> > > > # data_flags 7
> > > > # rState 0xf3e010
> > > > # xids[0] 3
> > > > # xids[1] 0
> > > > # Number of Ranges 2
> > > > # RecordRange[0]
> > > > request-range 0-0
> > > > reply-range 0-0
> > > > extension-request-major-range 0-0
> > > > extension-request-minor-range 0-0
> > > > extension-reply-major-range 0-0
> > > > extension-reply-minor-range 0-0
> > > > delivered-event-range 21-21
> > > > device-event-range 2-3
> > > > error-range 0-0
> > > > # RecordRange[1]
> > > > request-range 0-0
> > > > reply-range 0-0
> > > > extension-request-major-range 0-0
> > > > extension-request-minor-range 0-0
> > > > extension-reply-major-range 0-0
> > > > extension-reply-minor-range 0-0
> > > > delivered-event-range 0-0
> > > > device-event-range 100-102
> > > > error-range 0-0
> > > > Workaround: Creating context on data display instead of control
> > > > You can ignore this message
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151626341
> > > > 0,2,0,0,0,50,0,151626341
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151626341
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,102,0,0,0,0,0,151626565
> > > > 0,3,0,0,0,50,0,151626565
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,102,0,0,0,0,0,151626565
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151630352
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151630352
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632192
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632192
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632400
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,100,0,0,0,0,0,151632400
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151633661
> > > > 0,2,0,0,0,64,0,151633661
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151633661
> > > > ^Csighandler SIGINT (2)
> > > > Workaround: Creating context on data display instead of control
> > > > You can ignore this message
> > > > WARNING: Enough valuators ... still not printing
> > > > 0,101,0,0,0,0,0,151633837
> > > > zsh: segmentation fault cnee --record --keyboard
> > >
> > > > _______________________________________________
> > > > Bug-xnee mailing list
> > > > address@hidden
> > > > https://lists.gnu.org/mailman/listinfo/bug-xnee
> > >
> > >
> > > _______________________________________________
> > > Bug-xnee mailing list
> > > address@hidden
> > > https://lists.gnu.org/mailman/listinfo/bug-xnee
> > >
> >
>
> _______________________________________________
> Bug-xnee mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/bug-xnee
>