[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Bug-xnee] Xnee / Gnee
From: |
Henrik Sandklef |
Subject: |
Re: [Bug-xnee] Xnee / Gnee |
Date: |
Tue, 16 Apr 2013 10:38:34 +0200 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
What data (e.g events) did you chose to record?
Go to "Record settings"
Double click MotionNotify
Go to "Key bindings"
Write Q as key for Stop
Click Record
Move mouse a bit
Press q
# you should now have a recording
Click replay
# your mouse motions shall be seen again
/h
On Mon, Apr 15, 2013 at 02:38:23PM +0200, Daniel Zimmermann wrote:
> Hi there!
>
> 1) The links to test releases are down:
> * http://alpha.gnu.org/xnee/
> * ftp://alpha.gnu.org/xnee/
> (found on: http://xnee.wordpress.com/contact/ )
>
> 2) I get nothing but error messages, here an example:
> * Popup with error 24
> * See Attachment Screenshot fpr details also about parameters and the
> error
> * See below for Terminal output
> Thanks for a reply! --Dan-yell
>
> address@hidden:~$ gnee
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
>
> (gnee:2767): Gtk-WARNING **: GtkSpinButton: setting an adjustment with
> non-zero
> page size is deprecated
> NOTIFICATION: If you have problem with Xnee and recording device events: File
> a
> bug report including this text.
> 00
> OK
> No need to do anything
> 01
> Memory failure
> This is probably because you are out of memory
> 02
> Xnee can't find or create the file you are lookig for
> Check the path and the permissions
> 03
> Timeout expired
> The synchronisation timeout expired
> 04
> User interrupt
> This is an internal 'signal'
> 05
> Synchronisation failure
> For more information on this error, please read the manual(s)
> 06
> Wrong paramters
> You have given invalid input to Xnee
> 07
> Record extension missing on the display. Please add appropriate option to
> your X Server configuration
> Enable the RECORD extension. Read the manual on how to do this
> 08
> XTest extension missing on the display
> Enable the XTest extension. Read the mnual on how to do this
> 09
> No protocol choosen
> Make sure you have set the Xnee application to record some data
> 10
> Could not open the display
> Make sure you have given a correct display name and that you have
> permissions to open it
> 11
> Ambigious command
> Make sure that the command/actions set aren't ambigous
> 12
> Can't synchronise any longer
> Read the synchronisation part of the Xnee manual
> 13
> Xnee is not using synchronisation
> internal 'signal'
> 14
> Xnee can't find the plugin file
> Make sure that the path and permission are correct
> 15
> Xnee can't use the plugin file
> Make sure that the plugin file is valid
> 16
> Xnee can't find the project file specified
> Make sure that the path and permissions are valid
> 17
> xnee_data structure missing
> This is a major error, please report the error with all the information
> you
> have: project file, session file, comandline options etc
> 18
> record_setup structure missing
> This is a major error, please report the error with all the information
> you
> have: project file, session file, comandline options etc
> 19
> record_replay structure missing
> This is a major error, please report the error with all the information
> you
> have: project file, session file, comandline options etc
> 20
> Xnee syntax error
> Make sure all Xnee expressions are valid
> 21
> Requested grab mode is unknown
> Internal error, please report it
> 22
> No grab data
> Not used anymore. If this is reported to you, report it to the Xnee
> project
> 23
> Grab data found
> Internal state, please report this as an error if you receive it
> 24
> Bad grab data
> You have requested to grab the same key more than once or one already
> grabbed
> 25
> Bad session file
> Make sure that the path and permission to the session file are correct
> 26
> Invalid replay speed
> Make sure that the replay speed is valid
> 27
> Invalid screen resolution
> Make sure that the resolution is valid
> 28
> Invalid threshold(s)
> Make sure that the threshold(s) is/are valid
> 29
> Bad context
> Internal state, report if you receive this
> 30
> Blank line
>
> 31
> xosd failure
> Could not load xosd library
> 32
> Feedback failure
> Could not give feedback
> 33
> No mode set
> You have to specify a mode (record/replay/retype)
> 34
> Grab memory failure
> The memory used to save lines during grabs is exceeded. Report it
> 35
> Record memory failure
> Xnee failed due to bad data received from RECORD extension
> 36
> Date failure
> Xnee failed to get or handle the date from the OS
> 37
> Screen nr could not be retrieved
> Xnee could not find the screen of the recorded event. Report the problem
> 38
> Fatal error while adding data to range of recorded data
> Xnee could not add data to record. Report the problem
> 39
> Fatal error while setting replay offset
> Xnee could not adjust replay offsets. Report the problem
> 40
> Fatal error while adjusting window position
> Xnee could not adjust window position. Report the problem
> 41
> Missing arguments when trying to parse
> Xnee misses one or more arguments. Make sure your command line or file is
> correct
> 42
> OK, Xnee will quit as soon as possible
> No need to do anything
> 43
> Xnee have reached a point where it is confused over the grabs done
> Make sure you do not grab something already grabbed. If you are sure about
> this, report the problem (include recorded session file and verbose printout
> file)
> 44
> Syntax error in Xnee project file
> Check the file
> 45
> Something went wrong when executing a cli command to an option
> Most likely NOT an error in xnee
> 46
> Something went wrong when initializing XInput
> Most likely you don't have XInput enabled in your X server
> 47
> Someone requested Xnee to use a replay backend that does not exist
> Most likely this is an error inside xnee, please report this as a bug
> 48
> Last error
> Internal state, report if you receive this
>
>
> --
> Skype: dan-yell
> ICQ#97948332
> _______________________________________________
> Bug-xnee mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/bug-xnee