wr mem creates a 0 byte file

[Francisco Jorge]

Hello,

I am new to zebra, but I do not see this as a normal behaviour.

I have compiled zebra-0.93b under Solaris 2.6. After running the zebra and 
the rip daemon I have telnet to port 2602 (ripd) and configured some 
networks under 'router rip':

...
interface ppp114
!
interface ppp115
!
router rip
network 172.24.66.0/24
network 172.24.68.0/24
network 172.24.71.0/24
!
line vty
!
end


Then I wanted to save the configuration:

ripd#    wr mem
Configuration saved to /usr/local/etc/ripd.conf
ripd#

Everything looks normal, but then I have noticed that the ripd.conf file was 
empty:

(address@hidden)#ls -lrt /usr/local/etc/
total 20
-rw-------   1 root     other       2801 sbre 25 09:56 bgpd.conf.sample2
-rw-------   1 root     other        572 sbre 25 09:56 bgpd.conf.sample
-rw-------   1 root     other        182 sbre 25 09:56 ospfd.conf.sample
-rw-------   1 root     other        375 sbre 25 09:56 zebra.conf.sav
-rw-------   1 root     other        375 sbre 25 12:14 zebra.conf
-rw-------   1 root     other        375 sbre 25 12:39 zebra.conf.sample
-rw-------   1 root     other        412 sbre 25 12:39 ripd.conf.sample
-rw-------   1 root     other        412 sbre 25 12:40 ripd.conf.sav
-rw-------   1 root     other          0 sbre 25 12:41 ripd.conf
(address@hidden)#

After several tries, the results has always been the same.
Since this is not a routing issue, I do not think a netstat -rn will help, 
so I will not send it, but if you need it, just tell me.
I have configured zebra with no special options.

Regards,
Fran

_____________________________________________
Francisco Jorge
email: address@hidden

_________________________________________________________________
MSN. Más Útil cada Día. http://www.msn.es/intmap/