[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r3520 - in usrp-hw/trunk/sym: . generated
|
From: |
matt |
|
Subject: |
[Commit-gnuradio] r3520 - in usrp-hw/trunk/sym: . generated |
|
Date: |
Mon, 11 Sep 2006 00:38:09 -0600 (MDT) |
Author: matt
Date: 2006-09-11 00:38:09 -0600 (Mon, 11 Sep 2006)
New Revision: 3520
Added:
usrp-hw/trunk/sym/ATmega8-32pin.sym
usrp-hw/trunk/sym/generated/hws383.src
usrp-hw/trunk/sym/generated/irm046u-HB.src
usrp-hw/trunk/sym/generated/irm046u-LB.src
usrp-hw/trunk/sym/generated/irm046u-PWR.src
usrp-hw/trunk/sym/irm046u.sym
usrp-hw/trunk/sym/sd_mmc.sym
Modified:
usrp-hw/trunk/sym/generated/make_symbols
Log:
new parts. irm046u needs checking
Added: usrp-hw/trunk/sym/ATmega8-32pin.sym
===================================================================
--- usrp-hw/trunk/sym/ATmega8-32pin.sym (rev 0)
+++ usrp-hw/trunk/sym/ATmega8-32pin.sym 2006-09-11 06:38:09 UTC (rev 3520)
@@ -0,0 +1,372 @@
+v 20060123 1
+T -800 4500 8 10 0 0 0 0 1
+Copyright Mark Salyzyn
+T 2900 4300 9 10 1 1 0 8 3
+ATmega8
+32-pin
+TQFP/MLF
+T -800 4100 8 10 0 0 0 0 1
+description=Low-power AVR 8-bit Microcontroller
+T -800 4300 8 10 0 0 0 0 1
+documentation=http://rocky.digikey.com/WebLib/Atmel/Web Data/ATmeg8(L)
Preliminary Complete.pdf
+T -800 3900 8 10 0 0 0 0 1
+footprint=MLF32
+T 2800 4800 8 10 1 1 0 6 1
+refdes=U?
+T 1000 3700 8 10 0 1 0 6 1
+numslots=0
+P 3200 2000 2900 2000 1 0 0
+{
+T 3000 2050 5 8 1 1 0 0 1
+pinnumber=29
+T 3000 2150 5 8 0 1 0 2 1
+pinseq=29
+T 2850 2000 9 8 1 1 0 6 1
+pinlabel=(RESET) PC6
+T 2850 2000 5 8 0 1 0 8 1
+pintype=io
+}
+P 0 4500 300 4500 1 0 0
+{
+T 200 4550 5 8 1 1 0 6 1
+pinnumber=30
+T 200 4650 5 8 0 1 0 8 1
+pinseq=30
+T 350 4500 9 8 1 1 0 0 1
+pinlabel=PD0 (RxD)
+T 350 4500 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 4300 300 4300 1 0 0
+{
+T 200 4350 5 8 1 1 0 6 1
+pinnumber=31
+T 200 4450 5 8 0 1 0 8 1
+pinseq=31
+T 350 4300 9 8 1 1 0 0 1
+pinlabel=PD1 (TxD)
+T 350 4300 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 4100 300 4100 1 0 0
+{
+T 200 4150 5 8 1 1 0 6 1
+pinnumber=32
+T 200 4250 5 8 0 1 0 8 1
+pinseq=32
+T 350 4100 9 8 1 1 0 0 1
+pinlabel=PD2 (INT0)
+T 350 4100 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 3900 300 3900 1 0 0
+{
+T 200 3950 5 8 1 1 0 6 1
+pinnumber=1
+T 200 4050 5 8 0 1 0 8 1
+pinseq=1
+T 350 3900 9 8 1 1 0 0 1
+pinlabel=PD3 (INT1)
+T 350 3900 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 3700 300 3700 1 0 0
+{
+T 200 3750 5 8 1 1 0 6 1
+pinnumber=2
+T 200 3850 5 8 0 1 0 8 1
+pinseq=2
+T 350 3700 9 8 1 1 0 0 1
+pinlabel=PD4 (XCK/T0)
+T 350 3700 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 600 300 600 1 0 0
+{
+T 200 650 5 8 1 1 0 6 1
+pinnumber=7
+T 200 750 5 8 0 1 0 8 1
+pinseq=7
+T 350 600 9 8 1 1 0 0 1
+pinlabel=PB6 (XTAL1/OSC1)
+T 350 600 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 400 300 400 1 0 0
+{
+T 200 450 5 8 1 1 0 6 1
+pinnumber=8
+T 200 550 5 8 0 1 0 8 1
+pinseq=8
+T 350 400 9 8 1 1 0 0 1
+pinlabel=PB7 (XTAL2/TOSC2)
+T 350 400 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 3500 300 3500 1 0 0
+{
+T 200 3550 5 8 1 1 0 6 1
+pinnumber=9
+T 200 3650 5 8 0 1 0 8 1
+pinseq=9
+T 350 3500 9 8 1 1 0 0 1
+pinlabel=PD5 (T1)
+T 350 3500 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 3300 300 3300 1 0 0
+{
+T 200 3350 5 8 1 1 0 6 1
+pinnumber=10
+T 200 3450 5 8 0 1 0 8 1
+pinseq=10
+T 350 3300 9 8 1 1 0 0 1
+pinlabel=PD6 (AIN0)
+T 350 3300 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 3100 300 3100 1 0 0
+{
+T 200 3150 5 8 1 1 0 6 1
+pinnumber=11
+T 200 3250 5 8 0 1 0 8 1
+pinseq=11
+T 350 3100 9 8 1 1 0 0 1
+pinlabel=PD7 (AIN1)
+T 350 3100 5 8 0 1 0 2 1
+pintype=io
+}
+P 0 1800 300 1800 1 0 0
+{
+T 200 1850 5 8 1 1 0 6 1
+pinnumber=12
+T 200 1950 5 8 0 1 0 8 1
+pinseq=12
+T 350 1800 9 8 1 1 0 0 1
+pinlabel=PB0 (ICP1)
+T 350 1800 5 8 0 1 0 2 1
+pintype=io
+}
+P 300 1600 0 1600 1 0 1
+{
+T 200 1650 5 8 1 1 0 6 1
+pinnumber=13
+T 200 1750 5 8 0 1 0 8 1
+pinseq=13
+T 350 1600 9 8 1 1 0 0 1
+pinlabel=PB1 (OC1A)
+T 350 1600 5 8 0 1 0 2 1
+pintype=io
+}
+P 300 1400 0 1400 1 0 1
+{
+T 200 1450 5 8 1 1 0 6 1
+pinnumber=14
+T 200 1550 5 8 0 1 0 8 1
+pinseq=14
+T 350 1400 9 8 1 1 0 0 1
+pinlabel=PB2 (SS/OC1B)
+T 350 1400 5 8 0 1 0 2 1
+pintype=io
+}
+P 300 1200 0 1200 1 0 1
+{
+T 200 1250 5 8 1 1 0 6 1
+pinnumber=15
+T 200 1350 5 8 0 1 0 8 1
+pinseq=15
+T 350 1200 9 8 1 1 0 0 1
+pinlabel=PB3 (MOSI/OC2)
+T 350 1200 5 8 0 1 0 2 1
+pintype=io
+}
+P 300 1000 0 1000 1 0 1
+{
+T 200 1050 5 8 1 1 0 6 1
+pinnumber=16
+T 200 1150 5 8 0 1 0 8 1
+pinseq=16
+T 350 1000 9 8 1 1 0 0 1
+pinlabel=PB4 (MISO)
+T 350 1000 5 8 0 1 0 2 1
+pintype=io
+}
+P 300 800 0 800 1 0 1
+{
+T 200 850 5 8 1 1 0 6 1
+pinnumber=17
+T 200 950 5 8 0 1 0 8 1
+pinseq=17
+T 350 800 9 8 1 1 0 0 1
+pinlabel=PB5 (SCK)
+T 350 800 5 8 0 1 0 2 1
+pintype=io
+}
+P 2900 900 3200 900 1 0 1
+{
+T 3000 950 5 8 1 1 0 0 1
+pinnumber=18
+T 3000 1050 5 8 0 1 0 2 1
+pinseq=18
+T 2850 900 9 8 1 1 0 6 1
+pinlabel=AVCC
+T 2850 900 5 8 0 1 0 8 1
+pintype=in
+}
+P 2900 1200 3200 1200 1 0 1
+{
+T 3000 1250 5 8 1 1 0 0 1
+pinnumber=20
+T 3000 1350 5 8 0 1 0 2 1
+pinseq=20
+T 2850 1200 9 8 1 1 0 6 1
+pinlabel=AREF
+T 2850 1200 5 8 0 1 0 8 1
+pintype=in
+}
+P 2900 3200 3200 3200 1 0 1
+{
+T 3000 3250 5 8 1 1 0 0 1
+pinnumber=23
+T 3000 3350 5 8 0 1 0 2 1
+pinseq=23
+T 2850 3200 9 8 1 1 0 6 1
+pinlabel=(ADC0) PC0
+T 2850 3200 5 8 0 1 0 8 1
+pintype=io
+}
+P 2900 3000 3200 3000 1 0 1
+{
+T 3000 3050 5 8 1 1 0 0 1
+pinnumber=24
+T 3000 3150 5 8 0 1 0 2 1
+pinseq=24
+T 2850 3000 9 8 1 1 0 6 1
+pinlabel=(ADC1) PC1
+T 2850 3000 5 8 0 1 0 8 1
+pintype=io
+}
+P 2900 2800 3200 2800 1 0 1
+{
+T 3000 2850 5 8 1 1 0 0 1
+pinnumber=25
+T 3000 2950 5 8 0 1 0 2 1
+pinseq=25
+T 2850 2800 9 8 1 1 0 6 1
+pinlabel=(ADC2) PC2
+T 2850 2800 5 8 0 1 0 8 1
+pintype=io
+}
+P 2900 2600 3200 2600 1 0 1
+{
+T 3000 2650 5 8 1 1 0 0 1
+pinnumber=26
+T 3000 2750 5 8 0 1 0 2 1
+pinseq=26
+T 2850 2600 9 8 1 1 0 6 1
+pinlabel=(ADC3) PC3
+T 2850 2600 5 8 0 1 0 8 1
+pintype=io
+}
+P 2900 2400 3200 2400 1 0 1
+{
+T 3000 2450 5 8 1 1 0 0 1
+pinnumber=27
+T 3000 2550 5 8 0 1 0 2 1
+pinseq=27
+T 2850 2400 9 8 1 1 0 6 1
+pinlabel=(ADC4/SDA) PC4
+T 2850 2400 5 8 0 1 0 8 1
+pintype=io
+}
+P 2900 2200 3200 2200 1 0 1
+{
+T 3000 2250 5 8 1 1 0 0 1
+pinnumber=28
+T 3000 2350 5 8 0 1 0 2 1
+pinseq=28
+T 2850 2200 9 8 1 1 0 6 1
+pinlabel=(ADC5/SCL) PC5
+T 2850 2200 5 8 0 1 0 8 1
+pintype=io
+}
+B 300 300 2600 4400 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+T -800 4700 8 10 0 0 0 0 1
+device=ATmega8
+P 3200 1800 2900 1800 1 0 0
+{
+T 3000 1850 5 8 1 1 0 0 1
+pinnumber=19
+T 3000 1950 5 8 0 1 0 2 1
+pinseq=19
+T 2850 1800 9 8 1 1 0 6 1
+pinlabel=ADC6
+T 2850 1800 5 8 0 1 0 8 1
+pintype=in
+}
+P 3200 1600 2900 1600 1 0 0
+{
+T 3000 1650 5 8 1 1 0 0 1
+pinnumber=22
+T 3000 1750 5 8 0 1 0 2 1
+pinseq=22
+T 2850 1600 9 8 1 1 0 6 1
+pinlabel=ADC7
+T 2850 1600 5 8 0 1 0 8 1
+pintype=in
+}
+P 1600 4700 1600 5000 1 0 1
+{
+T 1550 4800 5 8 1 1 90 0 1
+pinnumber=4
+T 1450 4800 5 8 0 1 90 2 1
+pinseq=4
+T 1550 4600 9 8 1 1 0 5 1
+pinlabel=VCC
+T 1600 4650 5 8 0 1 90 8 1
+pintype=pwr
+}
+P 2000 4700 2000 5000 1 0 1
+{
+T 1950 4800 5 8 1 1 90 0 1
+pinnumber=6
+T 1850 4800 5 8 0 1 90 2 1
+pinseq=6
+T 1950 4600 9 8 1 1 0 5 1
+pinlabel=VCC
+T 2000 4650 5 8 0 1 90 8 1
+pintype=pwr
+}
+P 2100 300 2100 0 1 0 1
+{
+T 2200 150 5 8 1 1 0 3 1
+pinnumber=3
+T 2250 200 5 8 0 1 270 2 1
+pinseq=3
+T 2100 350 9 8 1 1 90 1 1
+pinlabel=GND
+T 2100 350 5 8 0 1 270 8 1
+pintype=pwr
+}
+P 2400 300 2400 0 1 0 1
+{
+T 2500 150 5 8 1 1 0 3 1
+pinnumber=5
+T 2550 200 5 8 0 1 270 2 1
+pinseq=5
+T 2400 350 9 8 1 1 90 1 1
+pinlabel=GND
+T 2400 350 5 8 0 1 270 8 1
+pintype=pwr
+}
+P 2700 300 2700 0 1 0 1
+{
+T 2800 150 5 8 1 1 0 3 1
+pinnumber=21
+T 2850 200 5 8 0 1 270 2 1
+pinseq=21
+T 2700 350 9 8 1 1 90 1 1
+pinlabel=GND
+T 2700 350 5 8 0 1 270 8 1
+pintype=pwr
+}
Added: usrp-hw/trunk/sym/generated/hws383.src
===================================================================
--- usrp-hw/trunk/sym/generated/hws383.src (rev 0)
+++ usrp-hw/trunk/sym/generated/hws383.src 2006-09-11 06:38:09 UTC (rev
3520)
@@ -0,0 +1,63 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=2800
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20030525
+name=HWS383
+device=HWS383
+refdes=U?
+footprint=HWS383
+description=Hexawave RF Transfer Switch
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+1 pwr line b GND
+2 pwr line b GND
+5 pwr line b GND
+8 pwr line b GND
+9 pwr line b GND
+11 pwr line b GND
+3 in line t VC1
+7 in line t VC2
+4 io line l ANT1
+6 io line l ANT2
+10 io line r RX
+12 io line r TX
Added: usrp-hw/trunk/sym/generated/irm046u-HB.src
===================================================================
--- usrp-hw/trunk/sym/generated/irm046u-HB.src (rev 0)
+++ usrp-hw/trunk/sym/generated/irm046u-HB.src 2006-09-11 06:38:09 UTC (rev
3520)
@@ -0,0 +1,62 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=2400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20030525
+name=IRM046U-HB
+device=IRM046U
+refdes=U?
+footprint=IRM046U
+description=Sharp Dual-band Power Amp
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+5 in line l RFin\_HB
+13 out line r RFout/Vcc3\_HB
+14 out line r RFout/Vcc3\_HB
+15 out line r RFout/Vcc3\_HB
+12 out line r Vdet\_HB
+
+6 pwr line t Vbb1&2\_HB
+7 pwr line t Vcc1\_HB
+9 pwr line t Vbb3\_HB
+10 pwr line t Vcc2\_HB
+11 pwr line t Vdd\_HB
Added: usrp-hw/trunk/sym/generated/irm046u-LB.src
===================================================================
--- usrp-hw/trunk/sym/generated/irm046u-LB.src (rev 0)
+++ usrp-hw/trunk/sym/generated/irm046u-LB.src 2006-09-11 06:38:09 UTC (rev
3520)
@@ -0,0 +1,60 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=2400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20030525
+name=IRM046U-LB
+device=IRM046U
+refdes=U?
+footprint=IRM046U
+description=Sharp Dual-band Power Amp
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+2 in line l RFin\_LB
+17 out line r RFout/Vcc2\_LB
+18 out line r RFout/Vcc2\_LB
+19 out line r Vdet\_LB
+
+20 pwr line t Vdd\_LB
+21 pwr line t Vcc1\_LB
+22 pwr line t Vbb2\_LB
+1 pwr line t Vbb1\_LB
Added: usrp-hw/trunk/sym/generated/irm046u-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/irm046u-PWR.src (rev 0)
+++ usrp-hw/trunk/sym/generated/irm046u-PWR.src 2006-09-11 06:38:09 UTC (rev
3520)
@@ -0,0 +1,67 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20030525
+name=IRM046U-PWR
+device=IRM046U
+refdes=U?
+footprint=IRM046U
+description=Sharp Dual-band Power Amp
+documentation=NA
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel.
+# negation lines can be added with _Q_
+# if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq type style posit. net label
+#-----------------------------------------------------
+1 pwr line l Vbb1\_LB
+20 pwr line l Vdd\_LB
+21 pwr line l Vcc1\_LB
+22 pwr line l Vbb2\_LB
+6 pwr line l Vbb1&2\_HB
+7 pwr line l Vcc1\_HB
+9 pwr line l Vbb3\_HB
+10 pwr line l Vcc2\_HB
+11 pwr line l Vdd\_HB
+24 in line b NC
+3 pwr line r GND
+4 pwr line r GND
+8 pwr line r GND
+16 pwr line r GND
+23 pwr line r GND
+25 pwr line r GND
Modified: usrp-hw/trunk/sym/generated/make_symbols
===================================================================
--- usrp-hw/trunk/sym/generated/make_symbols 2006-09-11 04:25:45 UTC (rev
3519)
+++ usrp-hw/trunk/sym/generated/make_symbols 2006-09-11 06:38:09 UTC (rev
3520)
@@ -126,3 +126,7 @@
tragesym max282X-PWR.src max282X-PWR.sym
tragesym max282X-CTRL.src max282X-CTRL.sym
+tragesym hws383.src hws383.sym
+tragesym irm046u-LB.src irm046u-LB.sym
+tragesym irm046u-HB.src irm046u-HB.sym
+tragesym irm046u-PWR.src irm046u-PWR.sym
Added: usrp-hw/trunk/sym/irm046u.sym
===================================================================
--- usrp-hw/trunk/sym/irm046u.sym (rev 0)
+++ usrp-hw/trunk/sym/irm046u.sym 2006-09-11 06:38:09 UTC (rev 3520)
@@ -0,0 +1,92 @@
+v 20060123 1
+T 2500 4900 8 10 1 1 0 0 1
+refdes=U?
+P 3900 2200 4200 2200 1 0 1
+{
+T 4000 2000 3 10 1 1 0 6 1
+pinnumber=6
+T 3800 2300 5 10 0 0 0 6 1
+pinseq=6
+}
+P 3300 2500 3300 2700 1 0 1
+{
+T 3400 2500 3 10 1 1 0 0 1
+pinnumber=4
+T 3200 2500 5 10 0 0 270 0 1
+pinseq=4
+}
+P 2600 2200 2300 2200 1 0 1
+{
+T 2600 2000 3 10 1 1 0 6 1
+pinnumber=3
+T 2600 2300 5 10 0 0 0 6 1
+pinseq=3
+}
+P 2700 1300 2700 1100 1 0 1
+{
+T 2700 1400 3 10 0 1 0 3 1
+pinnumber=3
+T 2600 1100 5 10 0 0 270 0 1
+pinseq=3
+}
+T 300 700 8 10 0 0 0 0 1
+device=MGA6x563
+P 2900 1300 2900 1100 1 0 1
+{
+T 2900 1400 3 10 0 1 0 3 1
+pinnumber=4
+T 3000 1000 5 10 0 0 90 0 1
+pinseq=4
+}
+P 3100 1300 3100 1100 1 0 1
+{
+T 3100 1400 3 10 0 1 0 3 1
+pinnumber=8
+T 3200 900 5 10 0 0 90 0 1
+pinseq=8
+}
+L 2600 2800 2600 1600 3 0 0 0 -1 -1
+L 2600 1600 3900 2200 3 0 0 0 -1 -1
+L 3900 2200 2600 2800 3 0 0 0 -1 -1
+T 3300 3200 9 10 1 0 0 4 1
+IRM046U
+L 3900 3900 2600 4500 3 0 0 0 -1 -1
+L 2600 4500 2600 3300 3 0 0 0 -1 -1
+L 2600 3300 3900 3900 3 0 0 0 -1 -1
+P 3900 3900 4200 3900 1 0 1
+{
+T 4000 3700 3 10 1 1 0 6 1
+pinnumber=6
+T 3800 4000 5 10 0 0 0 6 1
+pinseq=6
+}
+P 2600 3900 2300 3900 1 0 1
+{
+T 2600 3700 3 10 1 1 0 6 1
+pinnumber=3
+T 2600 4000 5 10 0 0 0 6 1
+pinseq=3
+}
+B 2400 1300 1700 3500 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+B 4000 3900 100 0 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 3300 1300 3300 1100 1 0 1
+{
+T 3300 1400 3 10 0 1 0 3 1
+pinnumber=16
+T 3400 900 5 10 0 0 90 0 1
+pinseq=16
+}
+P 3500 1300 3500 1100 1 0 1
+{
+T 3500 1400 3 10 0 1 0 3 1
+pinnumber=23
+T 3600 900 5 10 0 0 90 0 1
+pinseq=23
+}
+P 3700 1300 3700 1100 1 0 1
+{
+T 3700 1400 3 10 0 1 0 3 1
+pinnumber=25
+T 3800 900 5 10 0 0 90 0 1
+pinseq=25
+}
Added: usrp-hw/trunk/sym/sd_mmc.sym
===================================================================
--- usrp-hw/trunk/sym/sd_mmc.sym (rev 0)
+++ usrp-hw/trunk/sym/sd_mmc.sym 2006-09-11 06:38:09 UTC (rev 3520)
@@ -0,0 +1,125 @@
+v 20060123 1
+T 700 4100 8 10 1 1 0 6 1
+refdes=J?
+T -3300 2750 5 10 0 0 0 0 1
+device=SD_MMC
+T -3300 2950 5 10 0 0 0 0 1
+footprint=SD_MMC
+T -3300 3150 5 10 0 0 0 0 1
+author=Matt Ettus
+T -3300 3350 5 10 0 0 0 0 1
+description=Secure Digital and MultiMedia Card Connector
+T -3300 3550 5 10 0 0 0 0 1
+numslots=0
+P 0 3600 200 3600 1 0 0
+{
+T 200 3650 5 8 1 1 0 6 1
+pinnumber=1
+T 200 3550 5 8 0 1 0 8 1
+pinseq=1
+T 350 3600 9 8 1 1 0 0 1
+pinlabel=CD_DAT[3]/NC/nCS
+T 350 3600 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 3600 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 3200 200 3200 1 0 0
+{
+T 200 3250 5 8 1 1 0 6 1
+pinnumber=2
+T 200 3150 5 8 0 1 0 8 1
+pinseq=2
+T 350 3200 9 8 1 1 0 0 1
+pinlabel=CMD/CMD/Din
+T 350 3200 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 3200 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 2800 200 2800 1 0 0
+{
+T 200 2850 5 8 1 1 0 6 1
+pinnumber=3
+T 200 2750 5 8 0 1 0 8 1
+pinseq=3
+T 350 2800 9 8 1 1 0 0 1
+pinlabel=Vss1
+T 350 2800 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 2800 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 2400 200 2400 1 0 0
+{
+T 200 2450 5 8 1 1 0 6 1
+pinnumber=4
+T 200 2350 5 8 0 1 0 8 1
+pinseq=4
+T 350 2400 9 8 1 1 0 0 1
+pinlabel=Vdd
+T 350 2400 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 2400 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 2000 200 2000 1 0 0
+{
+T 200 2050 5 8 1 1 0 6 1
+pinnumber=5
+T 200 1950 5 8 0 1 0 8 1
+pinseq=5
+T 350 2000 9 8 1 1 0 0 1
+pinlabel=CLK
+T 350 2000 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 2000 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 1600 200 1600 1 0 0
+{
+T 200 1650 5 8 1 1 0 6 1
+pinnumber=6
+T 200 1550 5 8 0 1 0 8 1
+pinseq=6
+T 350 1600 9 8 1 1 0 0 1
+pinlabel=Vss2
+T 350 1600 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 1600 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 1200 200 1200 1 0 0
+{
+T 200 1250 5 8 1 1 0 6 1
+pinnumber=7
+T 200 1150 5 8 0 1 0 8 1
+pinseq=7
+T 350 1200 9 8 1 1 0 0 1
+pinlabel=DAT[0]/DAT[0]/Dout
+T 350 1200 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 1200 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 800 200 800 1 0 0
+{
+T 200 850 5 8 1 1 0 6 1
+pinnumber=8
+T 200 750 5 8 0 1 0 8 1
+pinseq=8
+T 350 800 9 8 1 1 0 0 1
+pinlabel=DAT[1]/NC/NC
+T 350 800 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 800 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+P 0 400 200 400 1 0 0
+{
+T 200 450 5 8 1 1 0 6 1
+pinnumber=9
+T 200 350 5 8 0 1 0 8 1
+pinseq=9
+T 350 400 9 8 1 1 0 0 1
+pinlabel=DAT[2]/NC/NC
+T 350 400 5 8 0 1 0 2 1
+pintype=pas
+}
+V 250 400 50 6 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+B 300 0 2800 4000 3 0 0 0 -1 -1 0 -1 -1 -1 -1 -1
+T 1800 200 9 10 1 0 0 0 2
+Pin Defs:
+SD/MMC/SPI
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r3520 - in usrp-hw/trunk/sym: . generated,
matt <=