[Commit-gnuradio] r3901 - usrp-hw/trunk/sym/generated

[matt]

Author: matt
Date: 2006-10-30 13:30:54 -0700 (Mon, 30 Oct 2006)
New Revision: 3901

Added:
   usrp-hw/trunk/sym/generated/adg3301.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
   usrp-hw/trunk/sym/generated/vctcxo-diff.src
Log:
added level translator, corrected polarity on vctcxo


Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2006-10-30 20:23:20 UTC (rev 
3900)
+++ usrp-hw/trunk/sym/generated/Makefile        2006-10-30 20:30:54 UTC (rev 
3901)
@@ -152,7 +152,8 @@
        ad79x2-msop.sym \
        ad56x4.sym \
        lt3510-A.sym \
-       lt3510-B.sym
+       lt3510-B.sym \
+       adg3301.sym
 
 
 

Added: usrp-hw/trunk/sym/generated/adg3301.src
===================================================================
--- usrp-hw/trunk/sym/generated/adg3301.src                             (rev 0)
+++ usrp-hw/trunk/sym/generated/adg3301.src     2006-10-30 20:30:54 UTC (rev 
3901)
@@ -0,0 +1,57 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=yes
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADG3301
+device=ADG3301
+refdes=U?
+footprint=SC70-6
+description=Level translator
+documentation=www.analog.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+#comment=
+#comment=
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+1              pwr     line    l               VccA
+2              io      line    l               A
+3              pwr     line    b               GND
+4              in      line    b               EN
+6              pwr     line    r               VccY
+5              io      line    r               Y

Modified: usrp-hw/trunk/sym/generated/vctcxo-diff.src
===================================================================
--- usrp-hw/trunk/sym/generated/vctcxo-diff.src 2006-10-30 20:23:20 UTC (rev 
3900)
+++ usrp-hw/trunk/sym/generated/vctcxo-diff.src 2006-10-30 20:30:54 UTC (rev 
3901)
@@ -50,7 +50,7 @@
 #pinnr seq     type    style   posit.  net     label   
 #-----------------------------------------------------
 1              in      line    l               TUNE
-2              in      line    l               ENB
+2              in      dot     l               \_ENB\_
 3              pwr     line    b               GND
 
 4              out     line    r               OUT