[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r4702 - gnuradio/branches/features/inband-usb/usrp/fpg
|
From: |
eb |
|
Subject: |
[Commit-gnuradio] r4702 - gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb |
|
Date: |
Fri, 2 Mar 2007 22:15:59 -0700 (MST) |
Author: eb
Date: 2007-03-02 22:15:58 -0700 (Fri, 02 Mar 2007)
New Revision: 4702
Added:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.csf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.esf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.psf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qpf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qsf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.v
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.vh
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_1rxhb_1tx.vh
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_2rxhb_2tx.vh
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_4rx_0tx.vh
Removed:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.csf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.esf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.psf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.qpf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.qsf
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.v
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.vh
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_1rxhb_1tx.vh
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_2rxhb_2tx.vh
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_4rx_0tx.vh
Log:
rename files and fix contents
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.csf
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.csf)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.csf
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.csf
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,444 @@
+COMPILER_SETTINGS
+{
+ IO_PLACEMENT_OPTIMIZATION = OFF;
+ ENABLE_DRC_SETTINGS = OFF;
+ PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF;
+ PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF;
+ PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF;
+ DRC_FANOUT_EXCEEDING = 30;
+ DRC_REPORT_FANOUT_EXCEEDING = OFF;
+ DRC_TOP_FANOUT = 50;
+ DRC_REPORT_TOP_FANOUT = OFF;
+ RUN_DRC_DURING_COMPILATION = OFF;
+ ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON;
+ ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF;
+ ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF;
+ ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF;
+ SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF;
+ MERGE_HEX_FILE = OFF;
+ TRUE_WYSIWYG_FLOW = OFF;
+ SEED = 1;
+ FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY;
+ FAMILY = Cyclone;
+ DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+ DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN
1";
+ DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+ DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1";
+ DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+ DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+ DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO
4";
+ DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
+ DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
+ DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB";
+ DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+ DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+ DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4";
+ DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS";
+ DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS";
+ DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS";
+ STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
+ PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
+ PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2";
+ STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1";
+ FAST_FIT_COMPILATION = OFF;
+ SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF;
+ OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = ON;
+ OPTIMIZE_TIMING = "NORMAL COMPILATION";
+ OPTIMIZE_HOLD_TIMING = OFF;
+ COMPILATION_LEVEL = FULL;
+ SAVE_DISK_SPACE = OFF;
+ SPEED_DISK_USAGE_TRADEOFF = NORMAL;
+ LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF;
+ SIGNALPROBE_ALLOW_OVERUSE = OFF;
+ FOCUS_ENTITY_NAME = |usrp_inband_usb;
+ ROUTING_BACK_ANNOTATION_MODE = OFF;
+ INC_PLC_MODE = OFF;
+ FIT_ONLY_ONE_ATTEMPT = OFF;
+}
+DEFAULT_DEVICE_OPTIONS
+{
+ GENERATE_CONFIG_HEXOUT_FILE = OFF;
+ GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON;
+ GENERATE_CONFIG_JBC_FILE = OFF;
+ GENERATE_CONFIG_JAM_FILE = OFF;
+ GENERATE_CONFIG_ISC_FILE = OFF;
+ GENERATE_CONFIG_SVF_FILE = OFF;
+ GENERATE_JBC_FILE_COMPRESSED = ON;
+ GENERATE_JBC_FILE = OFF;
+ GENERATE_JAM_FILE = OFF;
+ GENERATE_ISC_FILE = OFF;
+ GENERATE_SVF_FILE = OFF;
+ RESERVE_PIN = "AS INPUT TRI-STATED";
+ RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND";
+ HEXOUT_FILE_COUNT_DIRECTION = UP;
+ HEXOUT_FILE_START_ADDRESS = 0;
+ GENERATE_HEX_FILE = OFF;
+ GENERATE_RBF_FILE = OFF;
+ GENERATE_TTF_FILE = OFF;
+ RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED";
+ RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF;
+ AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON;
+ EPROM_USE_CHECKSUM_AS_USERCODE = OFF;
+ FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_CONFIGURATION_DEVICE = AUTO;
+ CYCLONE_CONFIGURATION_DEVICE = AUTO;
+ FLEX10K_CONFIGURATION_DEVICE = AUTO;
+ FLEX6K_CONFIGURATION_DEVICE = AUTO;
+ MERCURY_CONFIGURATION_DEVICE = AUTO;
+ EXCALIBUR_CONFIGURATION_DEVICE = AUTO;
+ APEX20K_CONFIGURATION_DEVICE = AUTO;
+ USE_CONFIGURATION_DEVICE = ON;
+ ENABLE_INIT_DONE_OUTPUT = OFF;
+ FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
+ ENABLE_DEVICE_WIDE_OE = OFF;
+ ENABLE_DEVICE_WIDE_RESET = OFF;
+ RELEASE_CLEARS_BEFORE_TRI_STATES = OFF;
+ AUTO_RESTART_CONFIGURATION = OFF;
+ ENABLE_VREFB_PIN = OFF;
+ ENABLE_VREFA_PIN = OFF;
+ SECURITY_BIT = OFF;
+ USER_START_UP_CLOCK = OFF;
+ APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL";
+ STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ STRATIX_UPDATE_MODE = STANDARD;
+ USE_CHECKSUM_AS_USERCODE = OFF;
+ MAX7000_USE_CHECKSUM_AS_USERCODE = OFF;
+ MAX7000_JTAG_USER_CODE = FFFFFFFF;
+ FLEX10K_JTAG_USER_CODE = 7F;
+ MERCURY_JTAG_USER_CODE = FFFFFFFF;
+ APEX20K_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_JTAG_USER_CODE = FFFFFFFF;
+ MAX7000S_JTAG_USER_CODE = FFFF;
+ RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF;
+ ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ MAX7000_ENABLE_JTAG_BST_SUPPORT = ON;
+ ENABLE_JTAG_BST_SUPPORT = OFF;
+ CONFIGURATION_CLOCK_DIVISOR = 1;
+ CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ";
+ CLOCK_SOURCE = INTERNAL;
+ COMPRESSION_MODE = OFF;
+ ON_CHIP_BITSTREAM_DECOMPRESSION = OFF;
+}
+AUTO_SLD_HUB_ENTITY
+{
+ AUTO_INSERT_SLD_HUB_ENTITY = ENABLE;
+ HUB_INSTANCE_NAME = SLD_HUB_INST;
+ HUB_ENTITY_NAME = SLD_HUB;
+}
+SIGNALTAP_LOGIC_ANALYZER_SETTINGS
+{
+ ENABLE_SIGNALTAP = Off;
+ AUTO_ENABLE_SMART_COMPILE = On;
+}
+CHIP(usrp_inband_usb)
+{
+ DEVICE = EP1C12Q240C8;
+ DEVICE_FILTER_PACKAGE = "ANY QFP";
+ DEVICE_FILTER_PIN_COUNT = 240;
+ DEVICE_FILTER_SPEED_GRADE = ANY;
+ AUTO_RESTART_CONFIGURATION = OFF;
+ RELEASE_CLEARS_BEFORE_TRI_STATES = OFF;
+ USER_START_UP_CLOCK = OFF;
+ ENABLE_DEVICE_WIDE_RESET = OFF;
+ ENABLE_DEVICE_WIDE_OE = OFF;
+ ENABLE_INIT_DONE_OUTPUT = OFF;
+ FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
+ ENABLE_JTAG_BST_SUPPORT = OFF;
+ MAX7000_ENABLE_JTAG_BST_SUPPORT = ON;
+ APEX20K_JTAG_USER_CODE = FFFFFFFF;
+ MERCURY_JTAG_USER_CODE = FFFFFFFF;
+ FLEX10K_JTAG_USER_CODE = 7F;
+ MAX7000_JTAG_USER_CODE = FFFFFFFF;
+ MAX7000S_JTAG_USER_CODE = FFFF;
+ STRATIX_JTAG_USER_CODE = FFFFFFFF;
+ APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ CYCLONE_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ USE_CONFIGURATION_DEVICE = OFF;
+ APEX20K_CONFIGURATION_DEVICE = AUTO;
+ MERCURY_CONFIGURATION_DEVICE = AUTO;
+ FLEX6K_CONFIGURATION_DEVICE = AUTO;
+ FLEX10K_CONFIGURATION_DEVICE = AUTO;
+ EXCALIBUR_CONFIGURATION_DEVICE = AUTO;
+ STRATIX_CONFIGURATION_DEVICE = AUTO;
+ CYCLONE_CONFIGURATION_DEVICE = AUTO;
+ STRATIX_UPDATE_MODE = STANDARD;
+ APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON;
+ DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF;
+ COMPRESSION_MODE = OFF;
+ ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF;
+ FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ EPROM_USE_CHECKSUM_AS_USERCODE = OFF;
+ USE_CHECKSUM_AS_USERCODE = OFF;
+ MAX7000_USE_CHECKSUM_AS_USERCODE = OFF;
+ GENERATE_TTF_FILE = OFF;
+ GENERATE_RBF_FILE = ON;
+ GENERATE_HEX_FILE = OFF;
+ SECURITY_BIT = OFF;
+ ENABLE_VREFA_PIN = OFF;
+ ENABLE_VREFB_PIN = OFF;
+ GENERATE_SVF_FILE = OFF;
+ GENERATE_ISC_FILE = OFF;
+ GENERATE_JAM_FILE = OFF;
+ GENERATE_JBC_FILE = OFF;
+ GENERATE_JBC_FILE_COMPRESSED = ON;
+ GENERATE_CONFIG_SVF_FILE = OFF;
+ GENERATE_CONFIG_ISC_FILE = OFF;
+ GENERATE_CONFIG_JAM_FILE = OFF;
+ GENERATE_CONFIG_JBC_FILE = OFF;
+ GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON;
+ GENERATE_CONFIG_HEXOUT_FILE = OFF;
+ ON_CHIP_BITSTREAM_DECOMPRESSION = OFF;
+ BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE = OFF;
+ HEXOUT_FILE_START_ADDRESS = 0;
+ HEXOUT_FILE_COUNT_DIRECTION = UP;
+ RESERVE_ALL_UNUSED_PINS = "AS INPUT TRI-STATED";
+ STRATIX_DEVICE_IO_STANDARD = LVTTL;
+ CLOCK_SOURCE = INTERNAL;
+ CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ";
+ CONFIGURATION_CLOCK_DIVISOR = 1;
+ RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED";
+ RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ SCLK : LOCATION = Pin_101;
+ SDI : LOCATION = Pin_100;
+ SEN : LOCATION = Pin_98;
+ SLD : LOCATION = Pin_95;
+ adc1_data[0] : LOCATION = Pin_5;
+ adc1_data[10] : LOCATION = Pin_235;
+ adc1_data[11] : LOCATION = Pin_234;
+ adc1_data[1] : LOCATION = Pin_4;
+ adc1_data[2] : LOCATION = Pin_3;
+ adc1_data[3] : LOCATION = Pin_2;
+ adc1_data[4] : LOCATION = Pin_1;
+ adc1_data[4] : IO_STANDARD = LVTTL;
+ adc1_data[5] : LOCATION = Pin_240;
+ adc1_data[6] : LOCATION = Pin_239;
+ adc1_data[7] : LOCATION = Pin_238;
+ adc1_data[8] : LOCATION = Pin_237;
+ adc1_data[9] : LOCATION = Pin_236;
+ adc2_data[0] : LOCATION = Pin_20;
+ adc2_data[10] : LOCATION = Pin_8;
+ adc2_data[11] : LOCATION = Pin_7;
+ adc2_data[1] : LOCATION = Pin_19;
+ adc2_data[2] : LOCATION = Pin_18;
+ adc2_data[3] : LOCATION = Pin_17;
+ adc2_data[4] : LOCATION = Pin_16;
+ adc2_data[5] : LOCATION = Pin_15;
+ adc2_data[6] : LOCATION = Pin_14;
+ adc2_data[7] : LOCATION = Pin_13;
+ adc2_data[8] : LOCATION = Pin_12;
+ adc2_data[9] : LOCATION = Pin_11;
+ adc3_data[0] : LOCATION = Pin_200;
+ adc3_data[10] : LOCATION = Pin_184;
+ adc3_data[11] : LOCATION = Pin_183;
+ adc3_data[1] : LOCATION = Pin_197;
+ adc3_data[2] : LOCATION = Pin_196;
+ adc3_data[3] : LOCATION = Pin_195;
+ adc3_data[4] : LOCATION = Pin_194;
+ adc3_data[5] : LOCATION = Pin_193;
+ adc3_data[6] : LOCATION = Pin_188;
+ adc3_data[7] : LOCATION = Pin_187;
+ adc3_data[8] : LOCATION = Pin_186;
+ adc3_data[9] : LOCATION = Pin_185;
+ adc4_data[0] : LOCATION = Pin_222;
+ adc4_data[10] : LOCATION = Pin_203;
+ adc4_data[11] : LOCATION = Pin_202;
+ adc4_data[1] : LOCATION = Pin_219;
+ adc4_data[2] : LOCATION = Pin_217;
+ adc4_data[3] : LOCATION = Pin_216;
+ adc4_data[4] : LOCATION = Pin_215;
+ adc4_data[5] : LOCATION = Pin_214;
+ adc4_data[6] : LOCATION = Pin_213;
+ adc4_data[7] : LOCATION = Pin_208;
+ adc4_data[8] : LOCATION = Pin_207;
+ adc4_data[9] : LOCATION = Pin_206;
+ adc_oeb[0] : LOCATION = Pin_228;
+ adc_oeb[1] : LOCATION = Pin_21;
+ adc_oeb[2] : LOCATION = Pin_181;
+ adc_oeb[3] : LOCATION = Pin_218;
+ adc_otr[0] : LOCATION = Pin_233;
+ adc_otr[1] : LOCATION = Pin_6;
+ adc_otr[2] : LOCATION = Pin_182;
+ adc_otr[3] : LOCATION = Pin_201;
+ adclk0 : LOCATION = Pin_224;
+ adclk1 : LOCATION = Pin_226;
+ clk0 : LOCATION = Pin_28;
+ clk0 : RESERVE_PIN = "AS INPUT TRI-STATED";
+ clk0 : IO_STANDARD = LVTTL;
+ clk1 : LOCATION = Pin_29;
+ clk1 : RESERVE_PIN = "AS INPUT TRI-STATED";
+ clk1 : IO_STANDARD = LVTTL;
+ clk3 : LOCATION = Pin_152;
+ clk3 : RESERVE_PIN = "AS INPUT TRI-STATED";
+ clk3 : IO_STANDARD = LVTTL;
+ clk_120mhz : LOCATION = Pin_153;
+ clk_120mhz : IO_STANDARD = LVTTL;
+ clk_out : LOCATION = Pin_63;
+ clk_out : IO_STANDARD = LVTTL;
+ dac1_data[0] : LOCATION = Pin_165;
+ dac1_data[10] : LOCATION = Pin_177;
+ dac1_data[11] : LOCATION = Pin_178;
+ dac1_data[12] : LOCATION = Pin_179;
+ dac1_data[13] : LOCATION = Pin_180;
+ dac1_data[1] : LOCATION = Pin_166;
+ dac1_data[2] : LOCATION = Pin_167;
+ dac1_data[3] : LOCATION = Pin_168;
+ dac1_data[4] : LOCATION = Pin_169;
+ dac1_data[5] : LOCATION = Pin_170;
+ dac1_data[6] : LOCATION = Pin_173;
+ dac1_data[7] : LOCATION = Pin_174;
+ dac1_data[8] : LOCATION = Pin_175;
+ dac1_data[9] : LOCATION = Pin_176;
+ dac2_data[0] : LOCATION = Pin_159;
+ dac2_data[10] : LOCATION = Pin_163;
+ dac2_data[11] : LOCATION = Pin_139;
+ dac2_data[12] : LOCATION = Pin_164;
+ dac2_data[13] : LOCATION = Pin_138;
+ dac2_data[1] : LOCATION = Pin_158;
+ dac2_data[2] : LOCATION = Pin_160;
+ dac2_data[3] : LOCATION = Pin_156;
+ dac2_data[4] : LOCATION = Pin_161;
+ dac2_data[5] : LOCATION = Pin_144;
+ dac2_data[6] : LOCATION = Pin_162;
+ dac2_data[7] : LOCATION = Pin_141;
+ dac2_data[8] : LOCATION = Pin_143;
+ dac2_data[9] : LOCATION = Pin_140;
+ dac3_data[0] : LOCATION = Pin_122;
+ dac3_data[10] : LOCATION = Pin_134;
+ dac3_data[11] : LOCATION = Pin_135;
+ dac3_data[12] : LOCATION = Pin_136;
+ dac3_data[13] : LOCATION = Pin_137;
+ dac3_data[1] : LOCATION = Pin_123;
+ dac3_data[2] : LOCATION = Pin_124;
+ dac3_data[3] : LOCATION = Pin_125;
+ dac3_data[4] : LOCATION = Pin_126;
+ dac3_data[5] : LOCATION = Pin_127;
+ dac3_data[6] : LOCATION = Pin_128;
+ dac3_data[7] : LOCATION = Pin_131;
+ dac3_data[8] : LOCATION = Pin_132;
+ dac3_data[9] : LOCATION = Pin_133;
+ dac4_data[0] : LOCATION = Pin_104;
+ dac4_data[10] : LOCATION = Pin_118;
+ dac4_data[11] : LOCATION = Pin_119;
+ dac4_data[12] : LOCATION = Pin_120;
+ dac4_data[13] : LOCATION = Pin_121;
+ dac4_data[1] : LOCATION = Pin_105;
+ dac4_data[2] : LOCATION = Pin_106;
+ dac4_data[3] : LOCATION = Pin_107;
+ dac4_data[4] : LOCATION = Pin_108;
+ dac4_data[5] : LOCATION = Pin_113;
+ dac4_data[6] : LOCATION = Pin_114;
+ dac4_data[7] : LOCATION = Pin_115;
+ dac4_data[8] : LOCATION = Pin_116;
+ dac4_data[9] : LOCATION = Pin_117;
+ enable_rx : LOCATION = Pin_88;
+ enable_tx : LOCATION = Pin_93;
+ gndbus[0] : LOCATION = Pin_223;
+ gndbus[0] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[0] : IO_STANDARD = LVTTL;
+ gndbus[1] : LOCATION = Pin_225;
+ gndbus[1] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[1] : IO_STANDARD = LVTTL;
+ gndbus[2] : LOCATION = Pin_227;
+ gndbus[2] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[2] : IO_STANDARD = LVTTL;
+ gndbus[3] : LOCATION = Pin_62;
+ gndbus[3] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[3] : IO_STANDARD = LVTTL;
+ gndbus[4] : LOCATION = Pin_64;
+ gndbus[4] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[4] : IO_STANDARD = LVTTL;
+ misc_pins[0] : LOCATION = Pin_87;
+ misc_pins[0] : IO_STANDARD = LVTTL;
+ misc_pins[10] : LOCATION = Pin_76;
+ misc_pins[10] : IO_STANDARD = LVTTL;
+ misc_pins[11] : LOCATION = Pin_74;
+ misc_pins[11] : IO_STANDARD = LVTTL;
+ misc_pins[1] : LOCATION = Pin_86;
+ misc_pins[1] : IO_STANDARD = LVTTL;
+ misc_pins[2] : LOCATION = Pin_85;
+ misc_pins[2] : IO_STANDARD = LVTTL;
+ misc_pins[3] : LOCATION = Pin_84;
+ misc_pins[3] : IO_STANDARD = LVTTL;
+ misc_pins[4] : LOCATION = Pin_83;
+ misc_pins[4] : IO_STANDARD = LVTTL;
+ misc_pins[5] : LOCATION = Pin_82;
+ misc_pins[5] : IO_STANDARD = LVTTL;
+ misc_pins[6] : LOCATION = Pin_79;
+ misc_pins[6] : IO_STANDARD = LVTTL;
+ misc_pins[7] : LOCATION = Pin_78;
+ misc_pins[7] : IO_STANDARD = LVTTL;
+ misc_pins[8] : LOCATION = Pin_77;
+ misc_pins[8] : IO_STANDARD = LVTTL;
+ misc_pins[9] : LOCATION = Pin_75;
+ misc_pins[9] : IO_STANDARD = LVTTL;
+ reset : LOCATION = Pin_94;
+ usbclk : LOCATION = Pin_55;
+ usbctl[0] : LOCATION = Pin_56;
+ usbctl[1] : LOCATION = Pin_54;
+ usbctl[2] : LOCATION = Pin_53;
+ usbctl[3] : LOCATION = Pin_58;
+ usbctl[4] : LOCATION = Pin_57;
+ usbctl[5] : LOCATION = Pin_44;
+ usbdata[0] : LOCATION = Pin_73;
+ usbdata[10] : LOCATION = Pin_41;
+ usbdata[11] : LOCATION = Pin_39;
+ usbdata[12] : LOCATION = Pin_38;
+ usbdata[12] : IO_STANDARD = LVTTL;
+ usbdata[13] : LOCATION = Pin_37;
+ usbdata[14] : LOCATION = Pin_24;
+ usbdata[15] : LOCATION = Pin_23;
+ usbdata[1] : LOCATION = Pin_68;
+ usbdata[2] : LOCATION = Pin_67;
+ usbdata[3] : LOCATION = Pin_66;
+ usbdata[4] : LOCATION = Pin_65;
+ usbdata[5] : LOCATION = Pin_61;
+ usbdata[6] : LOCATION = Pin_60;
+ usbdata[7] : LOCATION = Pin_59;
+ usbdata[8] : LOCATION = Pin_43;
+ usbdata[9] : LOCATION = Pin_42;
+ usbrdy[0] : LOCATION = Pin_45;
+ usbrdy[1] : LOCATION = Pin_46;
+ usbrdy[2] : LOCATION = Pin_47;
+ usbrdy[3] : LOCATION = Pin_48;
+ usbrdy[4] : LOCATION = Pin_49;
+ usbrdy[5] : LOCATION = Pin_50;
+ clear_status : LOCATION = Pin_99;
+}
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.esf
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.esf)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.esf
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.esf
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,14 @@
+SIMULATOR_SETTINGS
+{
+ ESTIMATE_POWER_CONSUMPTION = OFF;
+ GLITCH_INTERVAL = 1NS;
+ GLITCH_DETECTION = OFF;
+ SIMULATION_COVERAGE = ON;
+ CHECK_OUTPUTS = OFF;
+ SETUP_HOLD_DETECTION = OFF;
+ POWER_ESTIMATION_START_TIME = "0 NS";
+ ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON;
+ SIMULATION_MODE = TIMING;
+ START_TIME = 0NS;
+ USE_COMPILER_SETTINGS = usrp_inband_usb;
+}
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.psf
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.psf)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.psf
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.psf
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,312 @@
+DEFAULT_DESIGN_ASSISTANT_SETTINGS
+{
+ HCPY_ALOAD_SIGNALS = OFF;
+ HCPY_VREF_PINS = OFF;
+ HCPY_CAT = OFF;
+ HCPY_ILLEGAL_HC_DEV_PKG = OFF;
+ ACLK_RULE_IMSZER_ADOMAIN = OFF;
+ ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF;
+ ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF;
+ ACLK_CAT = OFF;
+ SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF;
+ SIGNALRACE_CAT = OFF;
+ NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF;
+ NONSYNCHSTRUCT_RULE_SRLATCH = OFF;
+ NONSYNCHSTRUCT_RULE_DLATCH = OFF;
+ NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF;
+ NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF;
+ NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF;
+ NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF;
+ NONSYNCHSTRUCT_RULE_REG_LOOP = OFF;
+ NONSYNCHSTRUCT_RULE_COMBLOOP = OFF;
+ NONSYNCHSTRUCT_CAT = OFF;
+ NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF;
+ TIMING_RULE_COIN_CLKEDGE = OFF;
+ TIMING_RULE_SHIFT_REG = OFF;
+ TIMING_RULE_HIGH_FANOUTS = OFF;
+ TIMING_CAT = OFF;
+ RESET_RULE_ALL = OFF;
+ RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF;
+ RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF;
+ RESET_RULE_REG_ASNYCH = OFF;
+ RESET_RULE_COMB_ASYNCH_RESET = OFF;
+ RESET_RULE_IMSYNCH_EXRESET = OFF;
+ RESET_RULE_UNSYNCH_EXRESET = OFF;
+ RESET_RULE_INPINS_RESETNET = OFF;
+ RESET_CAT = OFF;
+ CLK_RULE_ALL = OFF;
+ CLK_RULE_MIX_EDGES = OFF;
+ CLK_RULE_CLKNET_CLKSPINES = OFF;
+ CLK_RULE_INPINS_CLKNET = OFF;
+ CLK_RULE_GATING_SCHEME = OFF;
+ CLK_RULE_INV_CLOCK = OFF;
+ CLK_RULE_COMB_CLOCK = OFF;
+ CLK_CAT = OFF;
+ HCPY_EXCEED_USER_IO_USAGE = OFF;
+ HCPY_EXCEED_RAM_USAGE = OFF;
+ NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF;
+ SIGNALRACE_RULE_TRISTATE = OFF;
+ ASSG_RULE_MISSING_TIMING = OFF;
+ ASSG_RULE_MISSING_FMAX = OFF;
+ ASSG_CAT = OFF;
+}
+SYNTHESIS_FITTING_SETTINGS
+{
+ AUTO_SHIFT_REGISTER_RECOGNITION = ON;
+ AUTO_DSP_RECOGNITION = ON;
+ AUTO_RAM_RECOGNITION = ON;
+ REMOVE_DUPLICATE_LOGIC = ON;
+ AUTO_TURBO_BIT = ON;
+ AUTO_MERGE_PLLS = ON;
+ AUTO_OPEN_DRAIN_PINS = ON;
+ AUTO_PARALLEL_EXPANDERS = ON;
+ AUTO_FAST_OUTPUT_ENABLE_REGISTERS = OFF;
+ AUTO_FAST_OUTPUT_REGISTERS = OFF;
+ AUTO_FAST_INPUT_REGISTERS = OFF;
+ AUTO_CASCADE_CHAINS = ON;
+ AUTO_CARRY_CHAINS = ON;
+ AUTO_DELAY_CHAINS = ON;
+ MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH = 4;
+ PARALLEL_EXPANDER_CHAIN_LENGTH = 16;
+ CASCADE_CHAIN_LENGTH = 2;
+ STRATIX_CARRY_CHAIN_LENGTH = 70;
+ MERCURY_CARRY_CHAIN_LENGTH = 48;
+ FLEX10K_CARRY_CHAIN_LENGTH = 32;
+ FLEX6K_CARRY_CHAIN_LENGTH = 32;
+ CARRY_CHAIN_LENGTH = 48;
+ CARRY_OUT_PINS_LCELL_INSERT = ON;
+ NORMAL_LCELL_INSERT = ON;
+ AUTO_LCELL_INSERTION = ON;
+ ALLOW_XOR_GATE_USAGE = ON;
+ AUTO_PACKED_REGISTERS_STRATIX = NORMAL;
+ AUTO_PACKED_REGISTERS = OFF;
+ AUTO_PACKED_REG_CYCLONE = NORMAL;
+ FLEX10K_OPTIMIZATION_TECHNIQUE = AREA;
+ FLEX6K_OPTIMIZATION_TECHNIQUE = AREA;
+ MERCURY_OPTIMIZATION_TECHNIQUE = AREA;
+ APEX20K_OPTIMIZATION_TECHNIQUE = SPEED;
+ MAX7000_OPTIMIZATION_TECHNIQUE = SPEED;
+ STRATIX_OPTIMIZATION_TECHNIQUE = SPEED;
+ CYCLONE_OPTIMIZATION_TECHNIQUE = AREA;
+ FLEX10K_TECHNOLOGY_MAPPER = LUT;
+ FLEX6K_TECHNOLOGY_MAPPER = LUT;
+ MERCURY_TECHNOLOGY_MAPPER = LUT;
+ APEX20K_TECHNOLOGY_MAPPER = LUT;
+ MAX7000_TECHNOLOGY_MAPPER = "PRODUCT TERM";
+ STRATIX_TECHNOLOGY_MAPPER = LUT;
+ AUTO_IMPLEMENT_IN_ROM = OFF;
+ AUTO_GLOBAL_MEMORY_CONTROLS = OFF;
+ AUTO_GLOBAL_REGISTER_CONTROLS = ON;
+ AUTO_GLOBAL_OE = ON;
+ AUTO_GLOBAL_CLOCK = ON;
+ USE_LPM_FOR_AHDL_OPERATORS = ON;
+ LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF;
+ ENABLE_BUS_HOLD_CIRCUITRY = OFF;
+ WEAK_PULL_UP_RESISTOR = OFF;
+ TURBO_BIT = ON;
+ MAX7000_IGNORE_SOFT_BUFFERS = OFF;
+ IGNORE_SOFT_BUFFERS = ON;
+ MAX7000_IGNORE_LCELL_BUFFERS = AUTO;
+ IGNORE_LCELL_BUFFERS = OFF;
+ IGNORE_ROW_GLOBAL_BUFFERS = OFF;
+ IGNORE_GLOBAL_BUFFERS = OFF;
+ IGNORE_CASCADE_BUFFERS = OFF;
+ IGNORE_CARRY_BUFFERS = OFF;
+ REMOVE_DUPLICATE_REGISTERS = ON;
+ REMOVE_REDUNDANT_LOGIC_CELLS = OFF;
+ ALLOW_POWER_UP_DONT_CARE = ON;
+ PCI_IO = OFF;
+ NOT_GATE_PUSH_BACK = ON;
+ SLOW_SLEW_RATE = OFF;
+ DSP_BLOCK_BALANCING = AUTO;
+ STATE_MACHINE_PROCESSING = AUTO;
+}
+DEFAULT_HARDCOPY_SETTINGS
+{
+ HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS";
+}
+DEFAULT_TIMING_REQUIREMENTS
+{
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ RUN_ALL_TIMING_ANALYSES = ON;
+ IGNORE_CLOCK_SETTINGS = OFF;
+ DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE";
+ CUT_OFF_IO_PIN_FEEDBACK = ON;
+ CUT_OFF_CLEAR_AND_PRESET_PATHS = ON;
+ CUT_OFF_READ_DURING_WRITE_PATHS = ON;
+ CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON;
+ DO_MIN_ANALYSIS = ON;
+ DO_MIN_TIMING = OFF;
+ NUMBER_OF_PATHS_TO_REPORT = 200;
+ NUMBER_OF_DESTINATION_TO_REPORT = 10;
+ NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10;
+ MAX_SCC_SIZE = 50;
+}
+HDL_SETTINGS
+{
+ VERILOG_INPUT_VERSION = VERILOG_2001;
+ ENABLE_IP_DEBUG = OFF;
+ VHDL_INPUT_VERSION = VHDL93;
+ VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF;
+}
+PROJECT_INFO(usrp_inband_usb)
+{
+ ORIGINAL_QUARTUS_VERSION = 3.0;
+ PROJECT_CREATION_TIME_DATE = "00:14:04 JULY 13, 2003";
+ LAST_QUARTUS_VERSION = 3.0;
+ SHOW_REGISTRATION_MESSAGE = ON;
+ USER_LIBRARIES = "e:\usrp\fpga\megacells";
+}
+THIRD_PARTY_EDA_TOOLS(usrp_inband_usb)
+{
+ EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>";
+ EDA_SIMULATION_TOOL = "<NONE>";
+ EDA_TIMING_ANALYSIS_TOOL = "<NONE>";
+ EDA_BOARD_DESIGN_TOOL = "<NONE>";
+ EDA_FORMAL_VERIFICATION_TOOL = "<NONE>";
+ EDA_RESYNTHESIS_TOOL = "<NONE>";
+}
+EDA_TOOL_SETTINGS(eda_design_synthesis)
+{
+ EDA_INPUT_GND_NAME = GND;
+ EDA_INPUT_VCC_NAME = VCC;
+ EDA_SHOW_LMF_MAPPING_MESSAGES = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_INPUT_DATA_FORMAT = EDIF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_simulation)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_timing_analysis)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ EDA_LAUNCH_CMD_LINE_TOOL = OFF;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_board_design)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_formal_verification)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_palace)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ RESYNTHESIS_RETIMING = FULL;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+}
+CLOCK(clk_120mhz)
+{
+ FMAX_REQUIREMENT = "120.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(usbclk)
+{
+ FMAX_REQUIREMENT = "48.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(SCLK)
+{
+ FMAX_REQUIREMENT = "1.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(adclk0)
+{
+ FMAX_REQUIREMENT = "60.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(adclk1)
+{
+ FMAX_REQUIREMENT = "60.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qpf
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.qpf)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qpf
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qpf
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,29 @@
+# Copyright (C) 1991-2004 Altera Corporation
+# Any megafunction design, and related netlist (encrypted or decrypted),
+# support information, device programming or simulation file, and any other
+# associated documentation or information provided by Altera or a partner
+# under Altera's Megafunction Partnership Program may be used only
+# to program PLD devices (but not masked PLD devices) from Altera. Any
+# other use of such megafunction design, netlist, support information,
+# device programming or simulation file, or any other related documentation
+# or information is prohibited for any other purpose, including, but not
+# limited to modification, reverse engineering, de-compiling, or use with
+# any other silicon devices, unless such use is explicitly licensed under
+# a separate agreement with Altera or a megafunction partner. Title to the
+# intellectual property, including patents, copyrights, trademarks, trade
+# secrets, or maskworks, embodied in any such megafunction design, netlist,
+# support information, device programming or simulation file, or any other
+# related documentation or information provided by Altera or a megafunction
+# partner, remains with Altera, the megafunction partner, or their respective
+# licensors. No other licenses, including any licenses needed under any third
+# party's intellectual property, are provided herein.
+
+
+
+QUARTUS_VERSION = "4.0"
+DATE = "17:10:11 December 20, 2004"
+
+
+# Active Revisions
+
+PROJECT_REVISION = "usrp_inband_usb"
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qsf
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.qsf)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qsf
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.qsf
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,406 @@
+# Copyright (C) 1991-2005 Altera Corporation
+# Your use of Altera Corporation's design tools, logic functions
+# and other software and tools, and its AMPP partner logic
+# functions, and any output files any of the foregoing
+# (including device programming or simulation files), and any
+# associated documentation or information are expressly subject
+# to the terms and conditions of the Altera Program License
+# Subscription Agreement, Altera MegaCore Function License
+# Agreement, or other applicable license agreement, including,
+# without limitation, that your use is for the sole purpose of
+# programming logic devices manufactured by Altera and sold by
+# Altera or its authorized distributors. Please refer to the
+# applicable agreement for further details.
+
+
+# The default values for assignments are stored in the file
+# usrp_inband_usb_assignment_defaults.qdf
+# If this file doesn't exist, and for assignments not listed, see file
+# assignment_defaults.qdf
+
+# Altera recommends that you do not modify this file. This
+# file is updated automatically by the Quartus II software
+# and any changes you make may be lost or overwritten.
+
+
+# Project-Wide Assignments
+# ========================
+set_global_assignment -name ORIGINAL_QUARTUS_VERSION 3.0
+set_global_assignment -name PROJECT_CREATION_TIME_DATE "00:14:04 JULY 13,
2003"
+set_global_assignment -name LAST_QUARTUS_VERSION 6.1
+
+# Pin & Location Assignments
+# ==========================
+set_global_assignment -name RESERVE_PIN "AS INPUT TRI-STATED"
+set_location_assignment PIN_29 -to SCLK
+set_location_assignment PIN_117 -to SDI
+set_location_assignment PIN_28 -to usbclk
+set_location_assignment PIN_107 -to usbctl[0]
+set_location_assignment PIN_106 -to usbctl[1]
+set_location_assignment PIN_105 -to usbctl[2]
+set_location_assignment PIN_100 -to usbdata[0]
+set_location_assignment PIN_84 -to usbdata[10]
+set_location_assignment PIN_83 -to usbdata[11]
+set_location_assignment PIN_82 -to usbdata[12]
+set_location_assignment PIN_79 -to usbdata[13]
+set_location_assignment PIN_78 -to usbdata[14]
+set_location_assignment PIN_77 -to usbdata[15]
+set_location_assignment PIN_99 -to usbdata[1]
+set_location_assignment PIN_98 -to usbdata[2]
+set_location_assignment PIN_95 -to usbdata[3]
+set_location_assignment PIN_94 -to usbdata[4]
+set_location_assignment PIN_93 -to usbdata[5]
+set_location_assignment PIN_88 -to usbdata[6]
+set_location_assignment PIN_87 -to usbdata[7]
+set_location_assignment PIN_86 -to usbdata[8]
+set_location_assignment PIN_85 -to usbdata[9]
+set_location_assignment PIN_104 -to usbrdy[0]
+set_location_assignment PIN_101 -to usbrdy[1]
+set_location_assignment PIN_76 -to FX2_1
+set_location_assignment PIN_75 -to FX2_2
+set_location_assignment PIN_74 -to FX2_3
+set_location_assignment PIN_116 -to io_rx_a[0]
+set_location_assignment PIN_115 -to io_rx_a[1]
+set_location_assignment PIN_114 -to io_rx_a[2]
+set_location_assignment PIN_113 -to io_rx_a[3]
+set_location_assignment PIN_108 -to io_rx_a[4]
+set_location_assignment PIN_195 -to io_rx_a[5]
+set_location_assignment PIN_196 -to io_rx_a[6]
+set_location_assignment PIN_197 -to io_rx_a[7]
+set_location_assignment PIN_200 -to io_rx_a[8]
+set_location_assignment PIN_201 -to io_rx_a[9]
+set_location_assignment PIN_202 -to io_rx_a[10]
+set_location_assignment PIN_203 -to io_rx_a[11]
+set_location_assignment PIN_206 -to io_rx_a[12]
+set_location_assignment PIN_207 -to io_rx_a[13]
+set_location_assignment PIN_208 -to io_rx_a[14]
+set_location_assignment PIN_214 -to io_rx_b[0]
+set_location_assignment PIN_215 -to io_rx_b[1]
+set_location_assignment PIN_216 -to io_rx_b[2]
+set_location_assignment PIN_217 -to io_rx_b[3]
+set_location_assignment PIN_218 -to io_rx_b[4]
+set_location_assignment PIN_219 -to io_rx_b[5]
+set_location_assignment PIN_222 -to io_rx_b[6]
+set_location_assignment PIN_223 -to io_rx_b[7]
+set_location_assignment PIN_224 -to io_rx_b[8]
+set_location_assignment PIN_225 -to io_rx_b[9]
+set_location_assignment PIN_226 -to io_rx_b[10]
+set_location_assignment PIN_227 -to io_rx_b[11]
+set_location_assignment PIN_228 -to io_rx_b[12]
+set_location_assignment PIN_233 -to io_rx_b[13]
+set_location_assignment PIN_234 -to io_rx_b[14]
+set_location_assignment PIN_175 -to io_tx_a[0]
+set_location_assignment PIN_176 -to io_tx_a[1]
+set_location_assignment PIN_177 -to io_tx_a[2]
+set_location_assignment PIN_178 -to io_tx_a[3]
+set_location_assignment PIN_179 -to io_tx_a[4]
+set_location_assignment PIN_180 -to io_tx_a[5]
+set_location_assignment PIN_181 -to io_tx_a[6]
+set_location_assignment PIN_182 -to io_tx_a[7]
+set_location_assignment PIN_183 -to io_tx_a[8]
+set_location_assignment PIN_184 -to io_tx_a[9]
+set_location_assignment PIN_185 -to io_tx_a[10]
+set_location_assignment PIN_186 -to io_tx_a[11]
+set_location_assignment PIN_187 -to io_tx_a[12]
+set_location_assignment PIN_188 -to io_tx_a[13]
+set_location_assignment PIN_193 -to io_tx_a[14]
+set_location_assignment PIN_73 -to io_tx_b[0]
+set_location_assignment PIN_68 -to io_tx_b[1]
+set_location_assignment PIN_67 -to io_tx_b[2]
+set_location_assignment PIN_66 -to io_tx_b[3]
+set_location_assignment PIN_65 -to io_tx_b[4]
+set_location_assignment PIN_64 -to io_tx_b[5]
+set_location_assignment PIN_63 -to io_tx_b[6]
+set_location_assignment PIN_62 -to io_tx_b[7]
+set_location_assignment PIN_61 -to io_tx_b[8]
+set_location_assignment PIN_60 -to io_tx_b[9]
+set_location_assignment PIN_59 -to io_tx_b[10]
+set_location_assignment PIN_58 -to io_tx_b[11]
+set_location_assignment PIN_57 -to io_tx_b[12]
+set_location_assignment PIN_56 -to io_tx_b[13]
+set_location_assignment PIN_55 -to io_tx_b[14]
+set_location_assignment PIN_152 -to master_clk
+set_location_assignment PIN_144 -to rx_a_a[0]
+set_location_assignment PIN_143 -to rx_a_a[1]
+set_location_assignment PIN_141 -to rx_a_a[2]
+set_location_assignment PIN_140 -to rx_a_a[3]
+set_location_assignment PIN_139 -to rx_a_a[4]
+set_location_assignment PIN_138 -to rx_a_a[5]
+set_location_assignment PIN_137 -to rx_a_a[6]
+set_location_assignment PIN_136 -to rx_a_a[7]
+set_location_assignment PIN_135 -to rx_a_a[8]
+set_location_assignment PIN_134 -to rx_a_a[9]
+set_location_assignment PIN_133 -to rx_a_a[10]
+set_location_assignment PIN_132 -to rx_a_a[11]
+set_location_assignment PIN_23 -to rx_a_b[0]
+set_location_assignment PIN_21 -to rx_a_b[1]
+set_location_assignment PIN_20 -to rx_a_b[2]
+set_location_assignment PIN_19 -to rx_a_b[3]
+set_location_assignment PIN_18 -to rx_a_b[4]
+set_location_assignment PIN_17 -to rx_a_b[5]
+set_location_assignment PIN_16 -to rx_a_b[6]
+set_location_assignment PIN_15 -to rx_a_b[7]
+set_location_assignment PIN_14 -to rx_a_b[8]
+set_location_assignment PIN_13 -to rx_a_b[9]
+set_location_assignment PIN_12 -to rx_a_b[10]
+set_location_assignment PIN_11 -to rx_a_b[11]
+set_location_assignment PIN_131 -to rx_b_a[0]
+set_location_assignment PIN_128 -to rx_b_a[1]
+set_location_assignment PIN_127 -to rx_b_a[2]
+set_location_assignment PIN_126 -to rx_b_a[3]
+set_location_assignment PIN_125 -to rx_b_a[4]
+set_location_assignment PIN_124 -to rx_b_a[5]
+set_location_assignment PIN_123 -to rx_b_a[6]
+set_location_assignment PIN_122 -to rx_b_a[7]
+set_location_assignment PIN_121 -to rx_b_a[8]
+set_location_assignment PIN_120 -to rx_b_a[9]
+set_location_assignment PIN_119 -to rx_b_a[10]
+set_location_assignment PIN_118 -to rx_b_a[11]
+set_location_assignment PIN_8 -to rx_b_b[0]
+set_location_assignment PIN_7 -to rx_b_b[1]
+set_location_assignment PIN_6 -to rx_b_b[2]
+set_location_assignment PIN_5 -to rx_b_b[3]
+set_location_assignment PIN_4 -to rx_b_b[4]
+set_location_assignment PIN_3 -to rx_b_b[5]
+set_location_assignment PIN_2 -to rx_b_b[6]
+set_location_assignment PIN_240 -to rx_b_b[7]
+set_location_assignment PIN_239 -to rx_b_b[8]
+set_location_assignment PIN_238 -to rx_b_b[9]
+set_location_assignment PIN_237 -to rx_b_b[10]
+set_location_assignment PIN_236 -to rx_b_b[11]
+set_location_assignment PIN_156 -to SDO
+set_location_assignment PIN_153 -to SEN_FPGA
+set_location_assignment PIN_159 -to tx_a[0]
+set_location_assignment PIN_160 -to tx_a[1]
+set_location_assignment PIN_161 -to tx_a[2]
+set_location_assignment PIN_162 -to tx_a[3]
+set_location_assignment PIN_163 -to tx_a[4]
+set_location_assignment PIN_164 -to tx_a[5]
+set_location_assignment PIN_165 -to tx_a[6]
+set_location_assignment PIN_166 -to tx_a[7]
+set_location_assignment PIN_167 -to tx_a[8]
+set_location_assignment PIN_168 -to tx_a[9]
+set_location_assignment PIN_169 -to tx_a[10]
+set_location_assignment PIN_170 -to tx_a[11]
+set_location_assignment PIN_173 -to tx_a[12]
+set_location_assignment PIN_174 -to tx_a[13]
+set_location_assignment PIN_38 -to tx_b[0]
+set_location_assignment PIN_39 -to tx_b[1]
+set_location_assignment PIN_41 -to tx_b[2]
+set_location_assignment PIN_42 -to tx_b[3]
+set_location_assignment PIN_43 -to tx_b[4]
+set_location_assignment PIN_44 -to tx_b[5]
+set_location_assignment PIN_45 -to tx_b[6]
+set_location_assignment PIN_46 -to tx_b[7]
+set_location_assignment PIN_47 -to tx_b[8]
+set_location_assignment PIN_48 -to tx_b[9]
+set_location_assignment PIN_49 -to tx_b[10]
+set_location_assignment PIN_50 -to tx_b[11]
+set_location_assignment PIN_53 -to tx_b[12]
+set_location_assignment PIN_54 -to tx_b[13]
+set_location_assignment PIN_158 -to TXSYNC_A
+set_location_assignment PIN_37 -to TXSYNC_B
+set_location_assignment PIN_235 -to io_rx_b[15]
+set_location_assignment PIN_24 -to io_tx_b[15]
+set_location_assignment PIN_213 -to io_rx_a[15]
+set_location_assignment PIN_194 -to io_tx_a[15]
+set_location_assignment PIN_1 -to MYSTERY_SIGNAL
+
+# Timing Assignments
+# ==================
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS
OFF
+
+# Analysis & Synthesis Assignments
+# ================================
+set_global_assignment -name SAVE_DISK_SPACE OFF
+set_global_assignment -name DEVICE_FILTER_PACKAGE "ANY QFP"
+set_global_assignment -name DEVICE_FILTER_PIN_COUNT 240
+set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
+set_global_assignment -name FAMILY Cyclone
+set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE BALANCED
+set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name TOP_LEVEL_ENTITY usrp_inband_usb
+set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
+set_global_assignment -name USER_LIBRARIES "e:\\usrp\\fpga\\megacells"
+set_global_assignment -name AUTO_ENABLE_SMART_COMPILE ON
+
+# Fitter Assignments
+# ==================
+set_global_assignment -name DEVICE EP1C12Q240C8
+set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "PASSIVE SERIAL"
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
+set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
+set_global_assignment -name OPTIMIZE_TIMING "NORMAL COMPILATION"
+set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING OFF
+set_global_assignment -name IO_PLACEMENT_OPTIMIZATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT NORMAL
+set_global_assignment -name INC_PLC_MODE OFF
+set_global_assignment -name ROUTING_BACK_ANNOTATION_MODE OFF
+set_instance_assignment -name IO_STANDARD LVTTL -to usbdata[12]
+set_global_assignment -name STRATIX_DEVICE_IO_STANDARD LVTTL
+set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
+
+# Timing Analysis Assignments
+# ===========================
+set_global_assignment -name MAX_SCC_SIZE 50
+
+# EDA Netlist Writer Assignments
+# ==============================
+set_global_assignment -name EDA_SIMULATION_TOOL "<None>"
+set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL "<NONE>"
+set_global_assignment -name EDA_BOARD_DESIGN_TOOL "<NONE>"
+set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL "<NONE>"
+set_global_assignment -name EDA_RESYNTHESIS_TOOL "<NONE>"
+
+# Assembler Assignments
+# =====================
+set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
+set_global_assignment -name GENERATE_RBF_FILE ON
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT
TRI-STATED"
+set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF
+
+# Simulator Assignments
+# =====================
+set_global_assignment -name START_TIME "0 ns"
+set_global_assignment -name GLITCH_INTERVAL "1 ns"
+
+# Design Assistant Assignments
+# ============================
+set_global_assignment -name DRC_REPORT_TOP_FANOUT OFF
+set_global_assignment -name DRC_REPORT_FANOUT_EXCEEDING OFF
+set_global_assignment -name ASSG_CAT OFF
+set_global_assignment -name ASSG_RULE_MISSING_FMAX OFF
+set_global_assignment -name ASSG_RULE_MISSING_TIMING OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ASYN_RAM OFF
+set_global_assignment -name CLK_CAT OFF
+set_global_assignment -name CLK_RULE_COMB_CLOCK OFF
+set_global_assignment -name CLK_RULE_INV_CLOCK OFF
+set_global_assignment -name CLK_RULE_GATING_SCHEME OFF
+set_global_assignment -name CLK_RULE_INPINS_CLKNET OFF
+set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES OFF
+set_global_assignment -name CLK_RULE_MIX_EDGES OFF
+set_global_assignment -name RESET_CAT OFF
+set_global_assignment -name RESET_RULE_INPINS_RESETNET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_COMB_ASYNCH_RESET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name TIMING_CAT OFF
+set_global_assignment -name TIMING_RULE_SHIFT_REG OFF
+set_global_assignment -name TIMING_RULE_COIN_CLKEDGE OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE OFF
+set_global_assignment -name NONSYNCHSTRUCT_CAT OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMBLOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_REG_LOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_DELAY_CHAIN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_RIPPLE_CLK OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_SRLATCH OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED OFF
+set_global_assignment -name SIGNALRACE_CAT OFF
+set_global_assignment -name ACLK_CAT OFF
+set_global_assignment -name ACLK_RULE_NO_SZER_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_SZER_BTW_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_IMSZER_ADOMAIN OFF
+set_global_assignment -name HCPY_CAT OFF
+set_global_assignment -name HCPY_VREF_PINS OFF
+
+# SignalTap II Assignments
+# ========================
+set_global_assignment -name HUB_ENTITY_NAME SLD_HUB
+set_global_assignment -name HUB_INSTANCE_NAME SLD_HUB_INST
+set_global_assignment -name ENABLE_SIGNALTAP OFF
+
+# LogicLock Region Assignments
+# ============================
+set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF
+
+# -----------------
+# start CLOCK(SCLK)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id SCLK
+set_global_assignment -name FMAX_REQUIREMENT "1 MHz" -section_id SCLK
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS
OFF -section_id SCLK
+
+# end CLOCK(SCLK)
+# ---------------
+
+# -----------------------
+# start CLOCK(master_clk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id master_clk
+set_global_assignment -name FMAX_REQUIREMENT "64 MHz" -section_id master_clk
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS
OFF -section_id master_clk
+
+# end CLOCK(master_clk)
+# ---------------------
+
+# -------------------
+# start CLOCK(usbclk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id usbclk
+set_global_assignment -name FMAX_REQUIREMENT "48 MHz" -section_id usbclk
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS
OFF -section_id usbclk
+
+# end CLOCK(usbclk)
+# -----------------
+
+# ----------------------
+# start ENTITY(usrp_inband_usb)
+
+ # Timing Assignments
+ # ==================
+set_instance_assignment -name CLOCK_SETTINGS SCLK -to SCLK
+set_instance_assignment -name CLOCK_SETTINGS usbclk -to usbclk
+set_instance_assignment -name CLOCK_SETTINGS master_clk -to master_clk
+
+# end ENTITY(usrp_inband_usb)
+# --------------------
+
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rssi.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/ram16.v
+set_global_assignment -name VERILOG_FILE usrp_inband_usb.vh
+set_global_assignment -name VERILOG_FILE ../../megacells/fifo_4k.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/acc.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/mult.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/ram16_2sum.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/coeff_rom.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/halfband_decim.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/mac.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/hb/coeff_ram.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/tx_chain.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rx_dcoffset.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/adc_interface.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/io_pins.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/setting_reg.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/bidir_reg.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cic_int_shifter.v
+set_global_assignment -name VERILOG_FILE ../../megacells/clk_doubler.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rx_chain.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/gen_sync.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/master_control.v
+set_global_assignment -name VERILOG_FILE ../../megacells/fifo_2k.v
+set_global_assignment -name VERILOG_FILE ../../megacells/bustri.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/rx_buffer.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/tx_buffer.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/phase_acc.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cic_interp.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cic_decim.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cordic_stage.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/cordic.v
+set_global_assignment -name VERILOG_FILE usrp_inband_usb.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/clk_divider.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/serial_io.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/strobe_gen.v
+set_global_assignment -name VERILOG_FILE ../../sdr_lib/sign_extend.v
\ No newline at end of file
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.v
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.v)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.v
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.v
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,334 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003,2004 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// Top level module for a full setup with DUCs and DDCs
+
+// Define DEBUG_OWNS_IO_PINS if we're using the daughterboard i/o pins
+// for debugging info. NB, This can kill the m'board and/or d'board if you
+// have anything except basic d'boards installed.
+
+// Uncomment the following to include optional circuitry
+
+`include "usrp_inband_usb.vh"
+`include "../../../firmware/include/fpga_regs_common.v"
+`include "../../../firmware/include/fpga_regs_standard.v"
+
+module usrp_inband_usb
+(output MYSTERY_SIGNAL,
+ input master_clk,
+ input SCLK,
+ input SDI,
+ inout SDO,
+ input SEN_FPGA,
+
+ input FX2_1,
+ output FX2_2,
+ output FX2_3,
+
+ input wire [11:0] rx_a_a,
+ input wire [11:0] rx_b_a,
+ input wire [11:0] rx_a_b,
+ input wire [11:0] rx_b_b,
+
+ output wire [13:0] tx_a,
+ output wire [13:0] tx_b,
+
+ output wire TXSYNC_A,
+ output wire TXSYNC_B,
+
+ // USB interface
+ input usbclk,
+ input wire [2:0] usbctl,
+ output wire [1:0] usbrdy,
+ inout [15:0] usbdata, // NB Careful, inout
+
+ // These are the general purpose i/o's that go to the daughterboard slots
+ inout wire [15:0] io_tx_a,
+ inout wire [15:0] io_tx_b,
+ inout wire [15:0] io_rx_a,
+ inout wire [15:0] io_rx_b
+ );
+ wire [15:0] debugdata,debugctrl;
+ assign MYSTERY_SIGNAL = 1'b0;
+
+ wire clk64,clk128;
+
+ wire WR = usbctl[0];
+ wire RD = usbctl[1];
+ wire OE = usbctl[2];
+
+ wire have_space, have_pkt_rdy;
+ assign usbrdy[0] = have_space;
+ assign usbrdy[1] = have_pkt_rdy;
+
+ wire tx_underrun, rx_overrun;
+ wire clear_status = FX2_1;
+ assign FX2_2 = rx_overrun;
+ assign FX2_3 = tx_underrun;
+
+ wire [15:0] usbdata_out;
+
+ wire [3:0] dac0mux,dac1mux,dac2mux,dac3mux;
+
+ wire tx_realsignals;
+ wire [3:0] rx_numchan;
+ wire [2:0] tx_numchan;
+
+ wire [7:0] interp_rate, decim_rate;
+ wire [15:0] tx_debugbus, rx_debugbus;
+
+ wire enable_tx, enable_rx;
+ wire tx_dsp_reset, rx_dsp_reset, tx_bus_reset, rx_bus_reset;
+ wire [7:0] settings;
+
+ // Tri-state bus macro
+ bustri bustri( .data(usbdata_out),.enabledt(OE),.tridata(usbdata) );
+
+ assign clk64 = master_clk;
+
+ wire [15:0] ch0tx,ch1tx,ch2tx,ch3tx; //,ch4tx,ch5tx,ch6tx,ch7tx;
+ wire [15:0] ch0rx,ch1rx,ch2rx,ch3rx,ch4rx,ch5rx,ch6rx,ch7rx;
+
+ // TX
+ wire [15:0] i_out_0,i_out_1,q_out_0,q_out_1;
+ wire [15:0] bb_tx_i0,bb_tx_q0,bb_tx_i1,bb_tx_q1; //
bb_tx_i2,bb_tx_q2,bb_tx_i3,bb_tx_q3;
+
+ wire strobe_interp, tx_sample_strobe;
+ wire tx_empty;
+
+ wire serial_strobe;
+ wire [6:0] serial_addr;
+ wire [31:0] serial_data;
+
+ reg [15:0] debug_counter;
+ reg [15:0] loopback_i_0,loopback_q_0;
+
+
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Transmit Side
+`ifdef TX_ON
+ assign bb_tx_i0 = ch0tx;
+ assign bb_tx_q0 = ch1tx;
+ assign bb_tx_i1 = ch2tx;
+ assign bb_tx_q1 = ch3tx;
+
+ tx_buffer tx_buffer
+ ( .usbclk(usbclk),.bus_reset(tx_bus_reset),.reset(tx_dsp_reset),
+
.usbdata(usbdata),.WR(WR),.have_space(have_space),.tx_underrun(tx_underrun),
+ .channels({tx_numchan,1'b0}),
+ .tx_i_0(ch0tx),.tx_q_0(ch1tx),
+ .tx_i_1(ch2tx),.tx_q_1(ch3tx),
+ .tx_i_2(),.tx_q_2(),
+ .tx_i_3(),.tx_q_3(),
+ .txclk(clk64),.txstrobe(strobe_interp),
+ .clear_status(clear_status),
+ .tx_empty(tx_empty),
+ .debugbus(tx_debugbus) );
+
+ `ifdef TX_EN_0
+ tx_chain tx_chain_0
+ ( .clock(clk64),.reset(tx_dsp_reset),.enable(enable_tx),
+ .interp_rate(interp_rate),.sample_strobe(tx_sample_strobe),
+ .interpolator_strobe(strobe_interp),.freq(),
+ .i_in(bb_tx_i0),.q_in(bb_tx_q0),.i_out(i_out_0),.q_out(q_out_0) );
+ `else
+ assign i_out_0=16'd0;
+ assign q_out_0=16'd0;
+ `endif
+
+ `ifdef TX_EN_1
+ tx_chain tx_chain_1
+ ( .clock(clk64),.reset(tx_dsp_reset),.enable(enable_tx),
+ .interp_rate(interp_rate),.sample_strobe(tx_sample_strobe),
+ .interpolator_strobe(strobe_interp),.freq(),
+ .i_in(bb_tx_i1),.q_in(bb_tx_q1),.i_out(i_out_1),.q_out(q_out_1) );
+ `else
+ assign i_out_1=16'd0;
+ assign q_out_1=16'd0;
+ `endif
+
+ setting_reg #(`FR_TX_MUX)
+
sr_txmux(.clock(clk64),.reset(tx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),
+
.out({dac3mux,dac2mux,dac1mux,dac0mux,tx_realsignals,tx_numchan}));
+
+ wire [15:0] tx_a_a = dac0mux[3] ? (dac0mux[1] ? (dac0mux[0] ? q_out_1 :
i_out_1) : (dac0mux[0] ? q_out_0 : i_out_0)) : 16'b0;
+ wire [15:0] tx_b_a = dac1mux[3] ? (dac1mux[1] ? (dac1mux[0] ? q_out_1 :
i_out_1) : (dac1mux[0] ? q_out_0 : i_out_0)) : 16'b0;
+ wire [15:0] tx_a_b = dac2mux[3] ? (dac2mux[1] ? (dac2mux[0] ? q_out_1 :
i_out_1) : (dac2mux[0] ? q_out_0 : i_out_0)) : 16'b0;
+ wire [15:0] tx_b_b = dac3mux[3] ? (dac3mux[1] ? (dac3mux[0] ? q_out_1 :
i_out_1) : (dac3mux[0] ? q_out_0 : i_out_0)) : 16'b0;
+
+ wire txsync = tx_sample_strobe;
+ assign TXSYNC_A = txsync;
+ assign TXSYNC_B = txsync;
+
+ assign tx_a = txsync ? tx_b_a[15:2] : tx_a_a[15:2];
+ assign tx_b = txsync ? tx_b_b[15:2] : tx_a_b[15:2];
+`endif // `ifdef TX_ON
+
+
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Receive Side
+`ifdef RX_ON
+ wire rx_sample_strobe,strobe_decim,hb_strobe;
+ wire [15:0] bb_rx_i0,bb_rx_q0,bb_rx_i1,bb_rx_q1,
+ bb_rx_i2,bb_rx_q2,bb_rx_i3,bb_rx_q3;
+
+ wire loopback = settings[0];
+ wire counter = settings[1];
+
+ always @(posedge clk64)
+ if(rx_dsp_reset)
+ debug_counter <= #1 16'd0;
+ else if(~enable_rx)
+ debug_counter <= #1 16'd0;
+ else if(hb_strobe)
+ debug_counter <=#1 debug_counter + 16'd2;
+
+ always @(posedge clk64)
+ if(strobe_interp)
+ begin
+ loopback_i_0 <= #1 ch0tx;
+ loopback_q_0 <= #1 ch1tx;
+ end
+
+ assign ch0rx = counter ? debug_counter : loopback ? loopback_i_0 : bb_rx_i0;
+ assign ch1rx = counter ? debug_counter + 16'd1 : loopback ? loopback_q_0 :
bb_rx_q0;
+ assign ch2rx = bb_rx_i1;
+ assign ch3rx = bb_rx_q1;
+ assign ch4rx = bb_rx_i2;
+ assign ch5rx = bb_rx_q2;
+ assign ch6rx = bb_rx_i3;
+ assign ch7rx = bb_rx_q3;
+
+ wire [15:0]
ddc0_in_i,ddc0_in_q,ddc1_in_i,ddc1_in_q,ddc2_in_i,ddc2_in_q,ddc3_in_i,ddc3_in_q;
+ wire [31:0] rssi_0,rssi_1,rssi_2,rssi_3;
+
+ adc_interface
adc_interface(.clock(clk64),.reset(rx_dsp_reset),.enable(1'b1),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+
.rx_a_a(rx_a_a),.rx_b_a(rx_b_a),.rx_a_b(rx_a_b),.rx_b_b(rx_b_b),
+
.rssi_0(rssi_0),.rssi_1(rssi_1),.rssi_2(rssi_2),.rssi_3(rssi_3),
+ .ddc0_in_i(ddc0_in_i),.ddc0_in_q(ddc0_in_q),
+ .ddc1_in_i(ddc1_in_i),.ddc1_in_q(ddc1_in_q),
+ .ddc2_in_i(ddc2_in_i),.ddc2_in_q(ddc2_in_q),
+
.ddc3_in_i(ddc3_in_i),.ddc3_in_q(ddc3_in_q),.rx_numchan(rx_numchan) );
+
+ rx_buffer rx_buffer
+ ( .usbclk(usbclk),.bus_reset(rx_bus_reset),.reset(rx_dsp_reset),
+ .reset_regs(rx_dsp_reset),
+
.usbdata(usbdata_out),.RD(RD),.have_pkt_rdy(have_pkt_rdy),.rx_overrun(rx_overrun),
+ .channels(rx_numchan),
+ .ch_0(ch0rx),.ch_1(ch1rx),
+ .ch_2(ch2rx),.ch_3(ch3rx),
+ .ch_4(ch4rx),.ch_5(ch5rx),
+ .ch_6(ch6rx),.ch_7(ch7rx),
+ .rxclk(clk64),.rxstrobe(hb_strobe),
+ .clear_status(clear_status),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .debugbus(rx_debugbus) );
+
+ `ifdef RX_EN_0
+ rx_chain #(`FR_RX_FREQ_0,`FR_RX_PHASE_0) rx_chain_0
+ ( .clock(clk64),.reset(1'b0),.enable(enable_rx),
+
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(hb_strobe),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+
.i_in(ddc0_in_i),.q_in(ddc0_in_q),.i_out(bb_rx_i0),.q_out(bb_rx_q0),.debugdata(debugdata),.debugctrl(debugctrl));
+ `else
+ assign bb_rx_i0=16'd0;
+ assign bb_rx_q0=16'd0;
+ `endif
+
+ `ifdef RX_EN_1
+ rx_chain #(`FR_RX_FREQ_1,`FR_RX_PHASE_1) rx_chain_1
+ ( .clock(clk64),.reset(1'b0),.enable(enable_rx),
+
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .i_in(ddc1_in_i),.q_in(ddc1_in_q),.i_out(bb_rx_i1),.q_out(bb_rx_q1));
+ `else
+ assign bb_rx_i1=16'd0;
+ assign bb_rx_q1=16'd0;
+ `endif
+
+ `ifdef RX_EN_2
+ rx_chain #(`FR_RX_FREQ_2,`FR_RX_PHASE_2) rx_chain_2
+ ( .clock(clk64),.reset(1'b0),.enable(enable_rx),
+
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .i_in(ddc2_in_i),.q_in(ddc2_in_q),.i_out(bb_rx_i2),.q_out(bb_rx_q2));
+ `else
+ assign bb_rx_i2=16'd0;
+ assign bb_rx_q2=16'd0;
+ `endif
+
+ `ifdef RX_EN_3
+ rx_chain #(`FR_RX_FREQ_3,`FR_RX_PHASE_3) rx_chain_3
+ ( .clock(clk64),.reset(1'b0),.enable(enable_rx),
+
.decim_rate(decim_rate),.sample_strobe(rx_sample_strobe),.decimator_strobe(strobe_decim),.hb_strobe(),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .i_in(ddc3_in_i),.q_in(ddc3_in_q),.i_out(bb_rx_i3),.q_out(bb_rx_q3));
+ `else
+ assign bb_rx_i3=16'd0;
+ assign bb_rx_q3=16'd0;
+ `endif
+
+`endif // `ifdef RX_ON
+
+
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Control Functions
+
+ wire [31:0] capabilities;
+ assign capabilities[7] = `TX_CAP_HB;
+ assign capabilities[6:4] = `TX_CAP_NCHAN;
+ assign capabilities[3] = `RX_CAP_HB;
+ assign capabilities[2:0] = `RX_CAP_NCHAN;
+
+
+ serial_io serial_io
+ ( .master_clk(clk64),.serial_clock(SCLK),.serial_data_in(SDI),
+ .enable(SEN_FPGA),.reset(1'b0),.serial_data_out(SDO),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+
.readback_0({io_rx_a,io_tx_a}),.readback_1({io_rx_b,io_tx_b}),.readback_2(capabilities),.readback_3(32'hf0f0931a),
+
.readback_4(rssi_0),.readback_5(rssi_1),.readback_6(rssi_2),.readback_7(rssi_3)
+ );
+
+ wire [15:0] reg_0,reg_1,reg_2,reg_3;
+ master_control master_control
+ ( .master_clk(clk64),.usbclk(usbclk),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset),
+ .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset),
+ .enable_tx(enable_tx),.enable_rx(enable_rx),
+ .interp_rate(interp_rate),.decim_rate(decim_rate),
+ .tx_sample_strobe(tx_sample_strobe),.strobe_interp(strobe_interp),
+ .rx_sample_strobe(rx_sample_strobe),.strobe_decim(strobe_decim),
+ .tx_empty(tx_empty),
+ //.debug_0(rx_a_a),.debug_1(ddc0_in_i),
+ .debug_0(rx_debugbus),.debug_1(ddc0_in_i),
+
.debug_2({rx_sample_strobe,strobe_decim,serial_strobe,serial_addr}),.debug_3({rx_dsp_reset,tx_dsp_reset,rx_bus_reset,tx_bus_reset,enable_rx,tx_underrun,rx_overrun,decim_rate}),
+ .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) );
+
+ io_pins io_pins
+ (.io_0(io_tx_a),.io_1(io_rx_a),.io_2(io_tx_b),.io_3(io_rx_b),
+ .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3),
+ .clock(clk64),.rx_reset(rx_dsp_reset),.tx_reset(tx_dsp_reset),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe));
+
+
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Misc Settings
+ setting_reg #(`FR_MODE)
sr_misc(.clock(clk64),.reset(rx_dsp_reset),.strobe(serial_strobe),.addr(serial_addr),.in(serial_data),.out(settings));
+
+endmodule // usrp_inband_usb
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.vh
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.vh)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.vh
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb.vh
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,122 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2006 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// ====================================================================
+// User control over what parts get included
+//
+// >>>> EDIT ONLY THIS SECTION <<<<
+//
+// ====================================================================
+
+// Uncomment this for 1 rx channel (w/ halfband) & 1 transmit channel
+//`include "usrp_inband_usb_config_1rxhb_1tx.vh"
+
+// Uncomment this for 2 rx channels (w/ halfband) & 2 transmit channels
+ `include "usrp_inband_usb_config_2rxhb_2tx.vh"
+
+// Uncomment this for 4 rx channels (w/o halfband) & 0 transmit channels
+//`include "usrp_inband_usb_config_4rx_0tx.vh"
+
+// Add other "known to fit" configurations here...
+
+// ====================================================================
+//
+// >>>> DO NOT EDIT BELOW HERE <<<<
+//
+// [The stuff from here down is derived from the stuff included above]
+//
+// N.B., *all* the remainder of the code should be conditionalized
+// only in terms of:
+//
+// TX_ON, TX_EN_0, TX_EN_1, TX_EN_2, TX_EN_3, TX_CAP_NCHAN, TX_CAP_HB,
+// RX_ON, RX_EN_0, RX_EN_1, RX_EN_2, RX_EN_3, RX_CAP_NCHAN, RX_CAP_HB,
+// RX_NCO_ON, RX_CIC_ON
+// ====================================================================
+
+`ifdef TX_ON
+
+ `ifdef TX_SINGLE
+ `define TX_EN_0
+ `define TX_CAP_NCHAN 3'd1
+ `endif
+
+ `ifdef TX_DUAL
+ `define TX_EN_0
+ `define TX_EN_1
+ `define TX_CAP_NCHAN 3'd2
+ `endif
+
+ `ifdef TX_QUAD
+ `define TX_EN_0
+ `define TX_EN_1
+ `define TX_EN_2
+ `define TX_EN_3
+ `define TX_CAP_NCHAN 3'd4
+ `endif
+
+ `ifdef TX_HB_ON
+ `define TX_CAP_HB 1
+ `else
+ `define TX_CAP_HB 0
+ `endif
+
+`else // !ifdef TX_ON
+
+ `define TX_CAP_NCHAN 3'd0
+ `define TX_CAP_HB 0
+
+`endif // !ifdef TX_ON
+
+// --------------------------------------------------------------------
+
+`ifdef RX_ON
+
+ `ifdef RX_SINGLE
+ `define RX_EN_0
+ `define RX_CAP_NCHAN 3'd1
+ `endif
+
+ `ifdef RX_DUAL
+ `define RX_EN_0
+ `define RX_EN_1
+ `define RX_CAP_NCHAN 3'd2
+ `endif
+
+ `ifdef RX_QUAD
+ `define RX_EN_0
+ `define RX_EN_1
+ `define RX_EN_2
+ `define RX_EN_3
+ `define RX_CAP_NCHAN 3'd4
+ `endif
+
+ `ifdef RX_HB_ON
+ `define RX_CAP_HB 1
+ `else
+ `define RX_CAP_HB 0
+ `endif
+
+`else // !ifdef RX_ON
+
+ `define RX_CAP_NCHAN 3'd0
+ `define RX_CAP_HB 0
+
+`endif // !ifdef RX_ON
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_1rxhb_1tx.vh
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_1rxhb_1tx.vh)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_1rxhb_1tx.vh
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_1rxhb_1tx.vh
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,61 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2006 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// ------------------------------------------------------------
+// If TX_ON is not defined, there is *no* transmit circuitry built
+ `define TX_ON
+
+// ------------------------------------------------------------
+// Define 1 and only one of TX_SINGLE, TX_DUAL and TX_QUAD
+// to respectively enable 1, 2 or 4 transmit channels.
+// [Please note that only TX_DUAL is currently valid]
+ `define TX_SINGLE
+//`define TX_DUAL
+//`define TX_QUAD
+
+// ------------------------------------------------------------
+// Define TX_HB_ON to enable the transmit halfband filter
+// [Not implemented]
+//`define TX_HB_ON
+
+// ------------------------------------------------------------
+// IF RX_ON is not defined, there is *no* transmit circuitry built
+ `define RX_ON
+
+// ------------------------------------------------------------
+// Define 1 and only one of RX_SINGLE, RX_DUAL and RX_QUAD
+// to respectively define 1, 2 or 4 receive channels.
+
+ `define RX_SINGLE
+//`define RX_DUAL
+//`define RX_QUAD
+
+// ------------------------------------------------------------
+// Define RX_HB_ON to enable the receive halfband filter
+ `define RX_HB_ON
+
+// ------------------------------------------------------------
+// Define RX_NCO_ON to enable the receive Numerical Controlled Osc
+ `define RX_NCO_ON
+
+// ------------------------------------------------------------
+// Define RX_CIC_ON to enable the receive Cascaded Integrator Comb filter
+ `define RX_CIC_ON
\ No newline at end of file
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_2rxhb_2tx.vh
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_2rxhb_2tx.vh)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_2rxhb_2tx.vh
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_2rxhb_2tx.vh
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,61 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2006 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// ------------------------------------------------------------
+// If TX_ON is not defined, there is *no* transmit circuitry built
+ `define TX_ON
+
+// ------------------------------------------------------------
+// Define 1 and only one of TX_SINGLE, TX_DUAL and TX_QUAD
+// to respectively enable 1, 2 or 4 transmit channels.
+// [Please note that only TX_DUAL is currently valid]
+//`define TX_SINGLE
+ `define TX_DUAL
+//`define TX_QUAD
+
+// ------------------------------------------------------------
+// Define TX_HB_ON to enable the transmit halfband filter
+// [Not implemented]
+//`define TX_HB_ON
+
+// ------------------------------------------------------------
+// IF RX_ON is not defined, there is *no* receive circuitry built
+ `define RX_ON
+
+// ------------------------------------------------------------
+// Define 1 and only one of RX_SINGLE, RX_DUAL and RX_QUAD
+// to respectively define 1, 2 or 4 receive channels.
+
+//`define RX_SINGLE
+ `define RX_DUAL
+//`define RX_QUAD
+
+// ------------------------------------------------------------
+// Define RX_HB_ON to enable the receive halfband filter
+ `define RX_HB_ON
+
+// ------------------------------------------------------------
+// Define RX_NCO_ON to enable the receive Numerical Controlled Osc
+ `define RX_NCO_ON
+
+// ------------------------------------------------------------
+// Define RX_CIC_ON to enable the receive Cascaded Integrator Comb filter
+ `define RX_CIC_ON
Copied:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_4rx_0tx.vh
(from rev 4701,
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_4rx_0tx.vh)
===================================================================
---
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_4rx_0tx.vh
(rev 0)
+++
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_inband_usb_config_4rx_0tx.vh
2007-03-03 05:15:58 UTC (rev 4702)
@@ -0,0 +1,61 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2006 Matt Ettus
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// ------------------------------------------------------------
+// If TX_ON is not defined, there is *no* transmit circuitry built
+// `define TX_ON
+
+// ------------------------------------------------------------
+// Define 1 and only one of TX_SINGLE, TX_DUAL and TX_QUAD
+// to respectively enable 1, 2 or 4 transmit channels.
+// [Please note that only TX_DUAL is currently valid]
+//`define TX_SINGLE
+//`define TX_DUAL
+//`define TX_QUAD
+
+// ------------------------------------------------------------
+// Define TX_HB_ON to enable the transmit halfband filter
+// [Not implemented]
+//`define TX_HB_ON
+
+// ------------------------------------------------------------
+// IF RX_ON is not defined, there is *no* receive circuitry built
+ `define RX_ON
+
+// ------------------------------------------------------------
+// Define 1 and only one of RX_SINGLE, RX_DUAL and RX_QUAD
+// to respectively define 1, 2 or 4 receive channels.
+
+//`define RX_SINGLE
+//`define RX_DUAL
+ `define RX_QUAD
+
+// ------------------------------------------------------------
+// Define RX_HB_ON to enable the receive halfband filter
+//`define RX_HB_ON
+
+// ------------------------------------------------------------
+// Define RX_NCO_ON to enable the receive Numerical Controlled Osc
+ `define RX_NCO_ON
+
+// ------------------------------------------------------------
+// Define RX_CIC_ON to enable the receive Cascaded Integrator Comb filter
+ `define RX_CIC_ON
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.csf
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.esf
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.psf
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.qpf
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.qsf
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.v
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std.vh
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_1rxhb_1tx.vh
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_2rxhb_2tx.vh
Deleted:
gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb/usrp_std_config_4rx_0tx.vh
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r4702 - gnuradio/branches/features/inband-usb/usrp/fpga/toplevel/usrp_inband_usb,
eb <=