[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commit-gnuradio] r5117 - in gnuradio/trunk: . config gr-sounder gr-soun
|
From: |
jcorgan |
|
Subject: |
[Commit-gnuradio] r5117 - in gnuradio/trunk: . config gr-sounder gr-sounder/doc gr-sounder/src gr-sounder/src/fpga gr-sounder/src/fpga/lib gr-sounder/src/fpga/rbf gr-sounder/src/fpga/rbf/rev2 gr-sounder/src/fpga/rbf/rev4 gr-sounder/src/fpga/top gr-sounder/src/lib gr-sounder/src/python |
|
Date: |
Wed, 25 Apr 2007 17:38:22 -0600 (MDT) |
Author: jcorgan
Date: 2007-04-25 17:38:21 -0600 (Wed, 25 Apr 2007)
New Revision: 5117
Added:
gnuradio/trunk/config/grc_gr_sounder.m4
gnuradio/trunk/gr-sounder/
gnuradio/trunk/gr-sounder/Makefile.am
gnuradio/trunk/gr-sounder/README
gnuradio/trunk/gr-sounder/doc/
gnuradio/trunk/gr-sounder/doc/Makefile.am
gnuradio/trunk/gr-sounder/src/
gnuradio/trunk/gr-sounder/src/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/
gnuradio/trunk/gr-sounder/src/fpga/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/lib/
gnuradio/trunk/gr-sounder/src/fpga/lib/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/lib/dac_interface.v
gnuradio/trunk/gr-sounder/src/fpga/lib/dacpll.v
gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr.v
gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr_constants.v
gnuradio/trunk/gr-sounder/src/fpga/lib/sounder.v
gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_rx.v
gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_tx.v
gnuradio/trunk/gr-sounder/src/fpga/rbf/
gnuradio/trunk/gr-sounder/src/fpga/rbf/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev2/
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev4/
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf
gnuradio/trunk/gr-sounder/src/fpga/top/
gnuradio/trunk/gr-sounder/src/fpga/top/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/top/config.vh
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.csf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.esf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.psf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qpf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qsf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.v
gnuradio/trunk/gr-sounder/src/lib/
gnuradio/trunk/gr-sounder/src/lib/Makefile.am
gnuradio/trunk/gr-sounder/src/python/
gnuradio/trunk/gr-sounder/src/python/Makefile.am
gnuradio/trunk/gr-sounder/src/python/qa_nothing.py
gnuradio/trunk/gr-sounder/src/python/run_tests.in
gnuradio/trunk/gr-sounder/src/python/usrp_sounder.py
Removed:
gnuradio/trunk/gr-sounder/Makefile.am
gnuradio/trunk/gr-sounder/README
gnuradio/trunk/gr-sounder/doc/
gnuradio/trunk/gr-sounder/doc/Makefile.am
gnuradio/trunk/gr-sounder/src/
gnuradio/trunk/gr-sounder/src/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/
gnuradio/trunk/gr-sounder/src/fpga/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/lib/
gnuradio/trunk/gr-sounder/src/fpga/lib/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/lib/dac_interface.v
gnuradio/trunk/gr-sounder/src/fpga/lib/dacpll.v
gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr.v
gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr_constants.v
gnuradio/trunk/gr-sounder/src/fpga/lib/sounder.v
gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_rx.v
gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_tx.v
gnuradio/trunk/gr-sounder/src/fpga/rbf/
gnuradio/trunk/gr-sounder/src/fpga/rbf/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev2/
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev4/
gnuradio/trunk/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf
gnuradio/trunk/gr-sounder/src/fpga/top/
gnuradio/trunk/gr-sounder/src/fpga/top/Makefile.am
gnuradio/trunk/gr-sounder/src/fpga/top/config.vh
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.csf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.esf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.psf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qpf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qsf
gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.v
gnuradio/trunk/gr-sounder/src/lib/
gnuradio/trunk/gr-sounder/src/lib/Makefile.am
gnuradio/trunk/gr-sounder/src/python/
gnuradio/trunk/gr-sounder/src/python/Makefile.am
gnuradio/trunk/gr-sounder/src/python/qa_nothing.py
gnuradio/trunk/gr-sounder/src/python/run_tests.in
gnuradio/trunk/gr-sounder/src/python/usrp_sounder.py
Modified:
gnuradio/trunk/config/Makefile.am
gnuradio/trunk/configure.ac
Log:
Merged r5033:5116 from developer branch jcorgan/snd, with minor edits. Trunk
passes distcheck. Adds gr-sounder component, see gr-sounder/README.
Modified: gnuradio/trunk/config/Makefile.am
===================================================================
--- gnuradio/trunk/config/Makefile.am 2007-04-25 23:02:55 UTC (rev 5116)
+++ gnuradio/trunk/config/Makefile.am 2007-04-25 23:38:21 UTC (rev 5117)
@@ -46,6 +46,7 @@
grc_gr_radar.m4 \
grc_gr_radio_astronomy.m4 \
grc_gr_rdf.m4 \
+ grc_gr_sounder.m4 \
grc_gr_trellis.m4 \
grc_gr_usrp.m4 \
grc_gr_video_sdl.m4 \
Copied: gnuradio/trunk/config/grc_gr_sounder.m4 (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/config/grc_gr_sounder.m4)
===================================================================
--- gnuradio/trunk/config/grc_gr_sounder.m4 (rev 0)
+++ gnuradio/trunk/config/grc_gr_sounder.m4 2007-04-25 23:38:21 UTC (rev
5117)
@@ -0,0 +1,50 @@
+dnl Copyright 2007 Free Software Foundation, Inc.
+dnl
+dnl This file is part of GNU Radio
+dnl
+dnl GNU Radio is free software; you can redistribute it and/or modify
+dnl it under the terms of the GNU General Public License as published by
+dnl the Free Software Foundation; either version 2, or (at your option)
+dnl any later version.
+dnl
+dnl GNU Radio is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+dnl GNU General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU General Public License
+dnl along with GNU Radio; see the file COPYING. If not, write to
+dnl the Free Software Foundation, Inc., 51 Franklin Street,
+dnl Boston, MA 02110-1301, USA.
+
+AC_DEFUN([GRC_GR_SOUNDER],[
+ GRC_ENABLE([gr-sounder])
+
+ AC_CONFIG_FILES([ \
+ gr-sounder/Makefile \
+ gr-sounder/doc/Makefile \
+ gr-sounder/src/Makefile \
+ gr-sounder/src/fpga/Makefile \
+ gr-sounder/src/fpga/top/Makefile \
+ gr-sounder/src/fpga/lib/Makefile \
+ gr-sounder/src/fpga/rbf/Makefile \
+ gr-sounder/src/lib/Makefile \
+ gr-sounder/src/python/Makefile \
+ gr-sounder/src/python/run_tests
+ ])
+
+ passed=yes
+ # Don't do gr-sounder if usrp skipped
+ for dir in $skipped_dirs
+ do
+ if test x$dir = xusrp; then
+ AC_MSG_RESULT([Component gr-sounder requires usrp, which is not
being built.])
+ passed=no
+ fi
+ done
+
+ GRC_BUILD_CONDITIONAL([gr-sounder],[
+ dnl run_tests is created from run_tests.in. Make it executable.
+ AC_CONFIG_COMMANDS([run_tests_sounder], [chmod +x
gr-sounder/src/python/run_tests])
+ ])
+])
Modified: gnuradio/trunk/configure.ac
===================================================================
--- gnuradio/trunk/configure.ac 2007-04-25 23:02:55 UTC (rev 5116)
+++ gnuradio/trunk/configure.ac 2007-04-25 23:38:21 UTC (rev 5117)
@@ -221,6 +221,7 @@
GRC_EZDOP
GRC_GR_EZDOP dnl this must come after GRC_EZDOP
GRC_GR_RDF
+GRC_GR_SOUNDER dnl this must come after GRC_USRP
GRC_GNURADIO_EXAMPLES dnl must come last
# Each component is now either to be built, was skipped, or failed dependencies
Copied: gnuradio/trunk/gr-sounder (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder)
Property changes on: gnuradio/trunk/gr-sounder
___________________________________________________________________
Name: snv:ignore
+ Makefile
Makefile.in
Name: svn:ignore
+ Makefile
Makefile.in
Deleted: gnuradio/trunk/gr-sounder/Makefile.am
Copied: gnuradio/trunk/gr-sounder/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/Makefile.am (rev 0)
+++ gnuradio/trunk/gr-sounder/Makefile.am 2007-04-25 23:38:21 UTC (rev
5117)
@@ -0,0 +1,24 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
+SUBDIRS = src doc
Deleted: gnuradio/trunk/gr-sounder/README
Copied: gnuradio/trunk/gr-sounder/README (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/README)
===================================================================
--- gnuradio/trunk/gr-sounder/README (rev 0)
+++ gnuradio/trunk/gr-sounder/README 2007-04-25 23:38:21 UTC (rev 5117)
@@ -0,0 +1,61 @@
+This is a work-in-progress implementation of a m-sequence based channel
+sounder for GNU Radio and the USRP.
+
+At present, only the transmitter is implemented. When completed, you
+will be able to place the sounder transmitter at one location, the
+sounder receiver at another location, then determine in real-time the
+channel impulse and frequency response between them.
+
+The sounder uses a custom FPGA bitstream that is able to generate and
+receive a sounder waveform across a full 32 MHz wide swath of RF spectrum;
+the waveform generation and impulse response processing occur in logic in
+the USRP FPGA and not in the host PC. This avoids the USB throughput
+bottleneck entirely. Unfortunately, there is still roll-off in the AD9862
+digital up-converter interpolation filter that impacts the outer 20% of
+bandwidth, but this can be compensated for by measuring and subtracting
+out this response during calibration.
+
+The sounder is based on sending a maximal-length PN code modulated as BPSK
+with the supplied center frequency, with a chip-rate of 32 MHz. The
+receiver (partially implemented at this time but not working yet) correlates
+the received signal across all phases of the PN code and outputs an impulse
+response vector. As auto-correlation of an m-sequence is near zero for
+any relative phase shift, the actual measured energy at a particular
+phase shift is related to the impulse response for that time delay. This
+is the same principle used in spread-spectrum RAKE receivers such as are
+used with GPS and CDMA.
+
+The transmitter and receiver are designed to work only with the board in
+side A. This may be a standalone LFTX/LFRX or an RFX daughterboard.
+
+To use, the following script is installed into $prefix/bin:
+
+usage: usrp_sounder.py [options]
+
+options:
+ -h, --help show this help message and exit
+ -f FREQ, --frequency=FREQ
+ set frequency to FREQ in Hz, default is 0.0
+ -t, --transmit enable sounding transmitter
+ -r, --receive enable sounding receiver
+ -d DEGREE, --degree=DEGREE
+ set souding sequence degree (len=2^degree-1), default
+ is 16
+ -n SAMPLES, --samples=SAMPLES
+ number of samples to capture on receive, default is
+ infinite
+ -l, --loopback enable digital loopback, default is disabled
+
+To use with an LFTX board, set the center frequency to 16M:
+
+$ usrp_sounder.py -f 16M -t
+
+You can vary the m-sequence degree between 1 and 16, which will create
+sequence lengths between 1 (DC) and 65535 (1.023 us). This will affect
+how frequently the receiver can calculate impulse response vectors (to be
+documented as the receiver is completed.)
+
+Johnathan Corgan
+Corgan Enterprises LLC
address@hidden
+4/25/07
Copied: gnuradio/trunk/gr-sounder/doc (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/doc)
Property changes on: gnuradio/trunk/gr-sounder/doc
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
Deleted: gnuradio/trunk/gr-sounder/doc/Makefile.am
Copied: gnuradio/trunk/gr-sounder/doc/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/doc/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/doc/Makefile.am (rev 0)
+++ gnuradio/trunk/gr-sounder/doc/Makefile.am 2007-04-25 23:38:21 UTC (rev
5117)
@@ -0,0 +1,23 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
Copied: gnuradio/trunk/gr-sounder/src (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src)
Property changes on: gnuradio/trunk/gr-sounder/src
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
Deleted: gnuradio/trunk/gr-sounder/src/Makefile.am
Copied: gnuradio/trunk/gr-sounder/src/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/src/Makefile.am (rev 0)
+++ gnuradio/trunk/gr-sounder/src/Makefile.am 2007-04-25 23:38:21 UTC (rev
5117)
@@ -0,0 +1,24 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
+SUBDIRS = fpga lib python
Copied: gnuradio/trunk/gr-sounder/src/fpga (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga)
Property changes on: gnuradio/trunk/gr-sounder/src/fpga
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
Deleted: gnuradio/trunk/gr-sounder/src/fpga/Makefile.am
Copied: gnuradio/trunk/gr-sounder/src/fpga/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/Makefile.am
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/Makefile.am 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,24 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
+SUBDIRS = top lib rbf
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib)
Property changes on: gnuradio/trunk/gr-sounder/src/fpga/lib
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/Makefile.am
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/Makefile.am
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/Makefile.am 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,30 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
+EXTRA_DIST = \
+ dac_interface.v \
+ dacpll.v \
+ sounder.v \
+ sounder_rx.v \
+ sounder_tx.v
+
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/dac_interface.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/dac_interface.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/dac_interface.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/dac_interface.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/dac_interface.v 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,60 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+`include "../top/config.vh"
+
+module
dac_interface(clk_i,rst_i,ena_i,strobe_i,tx_i_i,tx_q_i,tx_data_o,tx_sync_o);
+ input clk_i;
+ input rst_i;
+ input ena_i;
+ input strobe_i;
+
+ input [15:0] tx_i_i;
+ input [15:0] tx_q_i;
+
+ output [15:0] tx_data_o;
+ output tx_sync_o;
+
+`ifdef TX_RATE_MAX
+ wire clk128;
+ reg clk64_d;
+ reg [15:0] tx_data_o;
+
+ // Create a 128 MHz clock
+ dacpll pll128(.areset(rst_i),.inclk0(clk_i),.c0(clk128));
+
+ // Register the clk64 clock in the clk128 domain
+ always @(posedge clk128)
+ clk64_d <= clk_i;
+
+ // Register the tx data in the clk128 domain
+ always @(posedge clk128)
+ tx_data_o <= clk64_d ? tx_i_i : tx_q_i;
+
+ assign tx_sync_o = clk64_d;
+
+
+`else // !`ifdef TX_RATE_MAX
+ assign tx_data_o = strobe_i ? tx_q_i : tx_i_i;
+ assign tx_sync_o = strobe_i;
+`endif // !`ifdef TX_RATE_MAX
+
+endmodule // dac_interface
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/dacpll.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/dacpll.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/dacpll.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/dacpll.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/dacpll.v 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,291 @@
+// megafunction wizard: %ALTPLL%
+// GENERATION: STANDARD
+// VERSION: WM1.0
+// MODULE: altpll
+
+// ============================================================
+// File Name: dacpll.v
+// Megafunction Name(s):
+// altpll
+//
+// Simulation Library Files(s):
+// altera_mf
+// ============================================================
+// ************************************************************
+// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
+//
+// 7.0 Build 33 02/05/2007 SJ Web Edition
+// ************************************************************
+
+
+//Copyright (C) 1991-2007 Altera Corporation
+//Your use of Altera Corporation's design tools, logic functions
+//and other software and tools, and its AMPP partner logic
+//functions, and any output files from any of the foregoing
+//(including device programming or simulation files), and any
+//associated documentation or information are expressly subject
+//to the terms and conditions of the Altera Program License
+//Subscription Agreement, Altera MegaCore Function License
+//Agreement, or other applicable license agreement, including,
+//without limitation, that your use is for the sole purpose of
+//programming logic devices manufactured by Altera and sold by
+//Altera or its authorized distributors. Please refer to the
+//applicable agreement for further details.
+
+
+// synopsys translate_off
+`timescale 1 ps / 1 ps
+// synopsys translate_on
+module dacpll (
+ areset,
+ inclk0,
+ c0);
+
+ input areset;
+ input inclk0;
+ output c0;
+
+ wire [5:0] sub_wire0;
+ wire [0:0] sub_wire4 = 1'h0;
+ wire [0:0] sub_wire1 = sub_wire0[0:0];
+ wire c0 = sub_wire1;
+ wire sub_wire2 = inclk0;
+ wire [1:0] sub_wire3 = {sub_wire4, sub_wire2};
+
+ altpll altpll_component (
+ .inclk (sub_wire3),
+ .areset (areset),
+ .clk (sub_wire0),
+ .activeclock (),
+ .clkbad (),
+ .clkena ({6{1'b1}}),
+ .clkloss (),
+ .clkswitch (1'b0),
+ .configupdate (1'b1),
+ .enable0 (),
+ .enable1 (),
+ .extclk (),
+ .extclkena ({4{1'b1}}),
+ .fbin (1'b1),
+ .fbout (),
+ .locked (),
+ .pfdena (1'b1),
+ .phasecounterselect ({4{1'b1}}),
+ .phasedone (),
+ .phasestep (1'b1),
+ .phaseupdown (1'b1),
+ .pllena (1'b1),
+ .scanaclr (1'b0),
+ .scanclk (1'b0),
+ .scanclkena (1'b1),
+ .scandata (1'b0),
+ .scandataout (),
+ .scandone (),
+ .scanread (1'b0),
+ .scanwrite (1'b0),
+ .sclkout0 (),
+ .sclkout1 (),
+ .vcooverrange (),
+ .vcounderrange ());
+ defparam
+ altpll_component.clk0_divide_by = 1,
+ altpll_component.clk0_duty_cycle = 50,
+ altpll_component.clk0_multiply_by = 2,
+ altpll_component.clk0_phase_shift = "0000",
+ altpll_component.compensate_clock = "CLK0",
+ altpll_component.inclk0_input_frequency = 15625,
+ altpll_component.intended_device_family = "Cyclone",
+ altpll_component.lpm_type = "altpll",
+ altpll_component.operation_mode = "NORMAL",
+ altpll_component.pll_type = "AUTO",
+ altpll_component.port_activeclock = "PORT_UNUSED",
+ altpll_component.port_areset = "PORT_USED",
+ altpll_component.port_clkbad0 = "PORT_UNUSED",
+ altpll_component.port_clkbad1 = "PORT_UNUSED",
+ altpll_component.port_clkloss = "PORT_UNUSED",
+ altpll_component.port_clkswitch = "PORT_UNUSED",
+ altpll_component.port_configupdate = "PORT_UNUSED",
+ altpll_component.port_fbin = "PORT_UNUSED",
+ altpll_component.port_inclk0 = "PORT_USED",
+ altpll_component.port_inclk1 = "PORT_UNUSED",
+ altpll_component.port_locked = "PORT_UNUSED",
+ altpll_component.port_pfdena = "PORT_UNUSED",
+ altpll_component.port_phasecounterselect = "PORT_UNUSED",
+ altpll_component.port_phasedone = "PORT_UNUSED",
+ altpll_component.port_phasestep = "PORT_UNUSED",
+ altpll_component.port_phaseupdown = "PORT_UNUSED",
+ altpll_component.port_pllena = "PORT_UNUSED",
+ altpll_component.port_scanaclr = "PORT_UNUSED",
+ altpll_component.port_scanclk = "PORT_UNUSED",
+ altpll_component.port_scanclkena = "PORT_UNUSED",
+ altpll_component.port_scandata = "PORT_UNUSED",
+ altpll_component.port_scandataout = "PORT_UNUSED",
+ altpll_component.port_scandone = "PORT_UNUSED",
+ altpll_component.port_scanread = "PORT_UNUSED",
+ altpll_component.port_scanwrite = "PORT_UNUSED",
+ altpll_component.port_clk0 = "PORT_USED",
+ altpll_component.port_clk1 = "PORT_UNUSED",
+ altpll_component.port_clk3 = "PORT_UNUSED",
+ altpll_component.port_clk4 = "PORT_UNUSED",
+ altpll_component.port_clk5 = "PORT_UNUSED",
+ altpll_component.port_clkena0 = "PORT_UNUSED",
+ altpll_component.port_clkena1 = "PORT_UNUSED",
+ altpll_component.port_clkena3 = "PORT_UNUSED",
+ altpll_component.port_clkena4 = "PORT_UNUSED",
+ altpll_component.port_clkena5 = "PORT_UNUSED",
+ altpll_component.port_extclk0 = "PORT_UNUSED",
+ altpll_component.port_extclk1 = "PORT_UNUSED",
+ altpll_component.port_extclk2 = "PORT_UNUSED",
+ altpll_component.port_extclk3 = "PORT_UNUSED";
+
+
+endmodule
+
+// ============================================================
+// CNX file retrieval info
+// ============================================================
+// Retrieval info: PRIVATE: ACTIVECLK_CHECK STRING "0"
+// Retrieval info: PRIVATE: BANDWIDTH STRING "1.000"
+// Retrieval info: PRIVATE: BANDWIDTH_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: BANDWIDTH_FREQ_UNIT STRING "MHz"
+// Retrieval info: PRIVATE: BANDWIDTH_PRESET STRING "Low"
+// Retrieval info: PRIVATE: BANDWIDTH_USE_AUTO STRING "1"
+// Retrieval info: PRIVATE: BANDWIDTH_USE_CUSTOM STRING "0"
+// Retrieval info: PRIVATE: BANDWIDTH_USE_PRESET STRING "0"
+// Retrieval info: PRIVATE: CLKBAD_SWITCHOVER_CHECK STRING "0"
+// Retrieval info: PRIVATE: CLKLOSS_CHECK STRING "0"
+// Retrieval info: PRIVATE: CLKSWITCH_CHECK STRING "0"
+// Retrieval info: PRIVATE: CNX_NO_COMPENSATE_RADIO STRING "0"
+// Retrieval info: PRIVATE: CREATE_CLKBAD_CHECK STRING "0"
+// Retrieval info: PRIVATE: CREATE_INCLK1_CHECK STRING "0"
+// Retrieval info: PRIVATE: CUR_DEDICATED_CLK STRING "c0"
+// Retrieval info: PRIVATE: CUR_FBIN_CLK STRING "e0"
+// Retrieval info: PRIVATE: DEVICE_FAMILY NUMERIC "11"
+// Retrieval info: PRIVATE: DEVICE_SPEED_GRADE STRING "8"
+// Retrieval info: PRIVATE: DEV_FAMILY STRING "Cyclone"
+// Retrieval info: PRIVATE: DIV_FACTOR0 NUMERIC "1"
+// Retrieval info: PRIVATE: DUTY_CYCLE0 STRING "50.00000000"
+// Retrieval info: PRIVATE: EXT_FEEDBACK_RADIO STRING "0"
+// Retrieval info: PRIVATE: GLOCKED_COUNTER_EDIT_CHANGED STRING "1"
+// Retrieval info: PRIVATE: GLOCKED_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: GLOCKED_MODE_CHECK STRING "0"
+// Retrieval info: PRIVATE: GLOCK_COUNTER_EDIT NUMERIC "1048575"
+// Retrieval info: PRIVATE: HAS_MANUAL_SWITCHOVER STRING "1"
+// Retrieval info: PRIVATE: INCLK0_FREQ_EDIT STRING "64.000"
+// Retrieval info: PRIVATE: INCLK0_FREQ_UNIT_COMBO STRING "MHz"
+// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT STRING "100.000"
+// Retrieval info: PRIVATE: INCLK1_FREQ_EDIT_CHANGED STRING "1"
+// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_CHANGED STRING "1"
+// Retrieval info: PRIVATE: INCLK1_FREQ_UNIT_COMBO STRING "MHz"
+// Retrieval info: PRIVATE: INT_FEEDBACK__MODE_RADIO STRING "1"
+// Retrieval info: PRIVATE: LOCKED_OUTPUT_CHECK STRING "0"
+// Retrieval info: PRIVATE: LOCK_LOSS_SWITCHOVER_CHECK STRING "0"
+// Retrieval info: PRIVATE: LONG_SCAN_RADIO STRING "1"
+// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE STRING "512.000"
+// Retrieval info: PRIVATE: LVDS_MODE_DATA_RATE_DIRTY NUMERIC "0"
+// Retrieval info: PRIVATE: LVDS_PHASE_SHIFT_UNIT0 STRING "deg"
+// Retrieval info: PRIVATE: MIRROR_CLK0 STRING "0"
+// Retrieval info: PRIVATE: MULT_FACTOR0 NUMERIC "2"
+// Retrieval info: PRIVATE: NORMAL_MODE_RADIO STRING "1"
+// Retrieval info: PRIVATE: OUTPUT_FREQ0 STRING "100.00000000"
+// Retrieval info: PRIVATE: OUTPUT_FREQ_MODE0 STRING "0"
+// Retrieval info: PRIVATE: OUTPUT_FREQ_UNIT0 STRING "MHz"
+// Retrieval info: PRIVATE: PHASE_RECONFIG_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: PHASE_RECONFIG_INPUTS_CHECK STRING "0"
+// Retrieval info: PRIVATE: PHASE_SHIFT0 STRING "0.00000000"
+// Retrieval info: PRIVATE: PHASE_SHIFT_UNIT0 STRING "ns"
+// Retrieval info: PRIVATE: PLL_ADVANCED_PARAM_CHECK STRING "0"
+// Retrieval info: PRIVATE: PLL_ARESET_CHECK STRING "1"
+// Retrieval info: PRIVATE: PLL_AUTOPLL_CHECK NUMERIC "1"
+// Retrieval info: PRIVATE: PLL_ENA_CHECK STRING "0"
+// Retrieval info: PRIVATE: PLL_ENHPLL_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PLL_FASTPLL_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PLL_LVDS_PLL_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PLL_PFDENA_CHECK STRING "0"
+// Retrieval info: PRIVATE: PLL_TARGET_HARCOPY_CHECK NUMERIC "0"
+// Retrieval info: PRIVATE: PRIMARY_CLK_COMBO STRING "inclk0"
+// Retrieval info: PRIVATE: SACN_INPUTS_CHECK STRING "0"
+// Retrieval info: PRIVATE: SCAN_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: SELF_RESET_LOCK_LOSS STRING "0"
+// Retrieval info: PRIVATE: SHORT_SCAN_RADIO STRING "0"
+// Retrieval info: PRIVATE: SPREAD_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: SPREAD_FREQ STRING "50.000"
+// Retrieval info: PRIVATE: SPREAD_FREQ_UNIT STRING "KHz"
+// Retrieval info: PRIVATE: SPREAD_PERCENT STRING "0.500"
+// Retrieval info: PRIVATE: SPREAD_USE STRING "0"
+// Retrieval info: PRIVATE: SRC_SYNCH_COMP_RADIO STRING "0"
+// Retrieval info: PRIVATE: STICKY_CLK0 STRING "1"
+// Retrieval info: PRIVATE: SWITCHOVER_COUNT_EDIT NUMERIC "1"
+// Retrieval info: PRIVATE: SWITCHOVER_FEATURE_ENABLED STRING "0"
+// Retrieval info: PRIVATE: USE_CLK0 STRING "1"
+// Retrieval info: PRIVATE: USE_CLKENA0 STRING "0"
+// Retrieval info: PRIVATE: ZERO_DELAY_RADIO STRING "0"
+// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
+// Retrieval info: CONSTANT: CLK0_DIVIDE_BY NUMERIC "1"
+// Retrieval info: CONSTANT: CLK0_DUTY_CYCLE NUMERIC "50"
+// Retrieval info: CONSTANT: CLK0_MULTIPLY_BY NUMERIC "2"
+// Retrieval info: CONSTANT: CLK0_PHASE_SHIFT STRING "0"
+// Retrieval info: CONSTANT: COMPENSATE_CLOCK STRING "CLK0"
+// Retrieval info: CONSTANT: INCLK0_INPUT_FREQUENCY NUMERIC "15625"
+// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone"
+// Retrieval info: CONSTANT: LPM_TYPE STRING "altpll"
+// Retrieval info: CONSTANT: OPERATION_MODE STRING "NORMAL"
+// Retrieval info: CONSTANT: PLL_TYPE STRING "AUTO"
+// Retrieval info: CONSTANT: PORT_ACTIVECLOCK STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_ARESET STRING "PORT_USED"
+// Retrieval info: CONSTANT: PORT_CLKBAD0 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CLKBAD1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CLKLOSS STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CLKSWITCH STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_CONFIGUPDATE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_FBIN STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_INCLK0 STRING "PORT_USED"
+// Retrieval info: CONSTANT: PORT_INCLK1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_LOCKED STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PFDENA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASECOUNTERSELECT STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASEDONE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASESTEP STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PHASEUPDOWN STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_PLLENA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANACLR STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANCLK STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANCLKENA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANDATA STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANDATAOUT STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANDONE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANREAD STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_SCANWRITE STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk0 STRING "PORT_USED"
+// Retrieval info: CONSTANT: PORT_clk1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk3 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk4 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clk5 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena0 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena3 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena4 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_clkena5 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk0 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk1 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk2 STRING "PORT_UNUSED"
+// Retrieval info: CONSTANT: PORT_extclk3 STRING "PORT_UNUSED"
+// Retrieval info: USED_PORT: @clk 0 0 6 0 OUTPUT_CLK_EXT VCC "@clk[5..0]"
+// Retrieval info: USED_PORT: @extclk 0 0 4 0 OUTPUT_CLK_EXT VCC
"@extclk[3..0]"
+// Retrieval info: USED_PORT: areset 0 0 0 0 INPUT GND "areset"
+// Retrieval info: USED_PORT: c0 0 0 0 0 OUTPUT_CLK_EXT VCC "c0"
+// Retrieval info: USED_PORT: inclk0 0 0 0 0 INPUT_CLK_EXT GND "inclk0"
+// Retrieval info: CONNECT: @inclk 0 0 1 0 inclk0 0 0 0 0
+// Retrieval info: CONNECT: c0 0 0 0 0 @clk 0 0 1 0
+// Retrieval info: CONNECT: @inclk 0 0 1 1 GND 0 0 0 0
+// Retrieval info: CONNECT: @areset 0 0 0 0 areset 0 0 0 0
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.v TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.ppf TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.inc FALSE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.cmp FALSE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll.bsf TRUE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_inst.v TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_bb.v TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_waveforms.html TRUE FALSE
+// Retrieval info: GEN_FILE: TYPE_NORMAL dacpll_wave*.jpg FALSE FALSE
+// Retrieval info: LIB_FILE: altera_mf
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/lfsr.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr.v 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,46 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module lfsr(clk_i,rst_i,ena_i,strobe_i,mask_i,pn_o);
+ parameter width = 16;
+
+ input clk_i;
+ input rst_i;
+ input ena_i;
+ input strobe_i;
+ input [width-1:0] mask_i;
+
+ output pn_o;
+
+ reg [width-1:0] shifter;
+
+ wire parity = ^(shifter & mask_i);
+
+ always @(posedge clk_i)
+ if (rst_i | ~ena_i)
+ shifter <= 1;
+ else
+ if (strobe_i)
+ shifter <= {shifter[width-2:0],parity};
+
+ assign pn_o = shifter[0];
+
+endmodule // lfsr
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr_constants.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr_constants.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/lfsr_constants.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr_constants.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/lfsr_constants.v 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,51 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module lfsr_constants(degree_i,mask_o,len_o);
+ input wire [4:0] degree_i;
+ output reg [15:0] mask_o;
+ output wire [15:0] len_o;
+
+ assign len_o = (16'b1 << degree_i) - 1;
+
+ always @*
+ case (degree_i)
+ 5'd00: mask_o = 16'h0000;
+ 5'd01: mask_o = 16'h0001;
+ 5'd02: mask_o = 16'h0003;
+ 5'd03: mask_o = 16'h0005;
+ 5'd04: mask_o = 16'h0009;
+ 5'd05: mask_o = 16'h0012;
+ 5'd06: mask_o = 16'h0021;
+ 5'd07: mask_o = 16'h0041;
+ 5'd08: mask_o = 16'h008E;
+ 5'd09: mask_o = 16'h0108;
+ 5'd10: mask_o = 16'h0204;
+ 5'd11: mask_o = 16'h0402;
+ 5'd12: mask_o = 16'h0829;
+ 5'd13: mask_o = 16'h100D;
+ 5'd14: mask_o = 16'h2015;
+ 5'd15: mask_o = 16'h4001;
+ 5'd16: mask_o = 16'h8016;
+ default: mask_o = 16'h0000;
+ endcase // case(degree_i)
+
+endmodule // lfsr_constants
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/sounder.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/sounder.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/sounder.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/sounder.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/sounder.v 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,86 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+`include "../../../../usrp/firmware/include/fpga_regs_common.v"
+`include "../../../../usrp/firmware/include/fpga_regs_standard.v"
+
+module
sounder(clk_i,saddr_i,sdata_i,s_strobe_i,tx_rst_i,tx_enable_i,tx_strobe_i,
+ tx_dac_i_o,tx_dac_q_o,
+ rx_rst_i,rx_enable_i,rx_strobe_i,rx_strobe_o,
+ rx_adc_i_i,rx_adc_q_i,rx_imp_i_o,rx_imp_q_o);
+
+ // System interface
+ input clk_i; // Master clock @ 64 MHz
+ input [6:0] saddr_i; // Configuration bus address
+ input [31:0] sdata_i; // Configuration bus data
+ input s_strobe_i; // Configuration bus write
+
+ // Transmit subsystem
+ input tx_rst_i; // Independent subsystem reset
+ input tx_enable_i; // Turn on transmitter functionality
+ input tx_strobe_i; // Generate an transmitter output sample
+ output [15:0] tx_dac_i_o; // I channel transmitter output to DAC
+ output [15:0] tx_dac_q_o; // Q channel transmitter output to DAC
+
+ // Receive subsystem
+ input rx_rst_i; // Independent subsystem reset
+ input rx_enable_i; // Turn on receiver functionality
+ input rx_strobe_i; // Indicates receive sample ready from ADC
+ output rx_strobe_o; // Indicates output samples ready for Rx FIFO
+ input [15:0] rx_adc_i_i; // I channel input from ADC
+ input [15:0] rx_adc_q_i; // Q channel input from ADC
+ output [15:0] rx_imp_i_o; // I channel impulse response to Rx FIFO
+ output [15:0] rx_imp_q_o; // Q channel impulse response to Rx FIFO
+
+ // Configuration
+ wire [4:0] degree; // LFSR register length
+ wire [15:0] mask; // LFSR parity mask
+ wire [15:0] len; // PN code sequence length
+ wire loopback; // Enable digital loopback
+
+ // Loopback implementation
+ wire [15:0] tx_i, tx_q, rx_i, rx_q; // Internal transmit and receive data
bus
+
+ assign tx_dac_i_o = loopback ? 16'b0 : tx_i;
+ assign tx_dac_q_o = loopback ? 16'b0 : tx_q;
+ assign rx_i = loopback ? tx_i : rx_adc_i_i;
+ assign rx_q = loopback ? tx_q : rx_adc_q_i;
+
+ setting_reg #(`FR_USER_0) sr_lfsr_degree
+ (
.clock(clk_i),.reset(1'b0),.strobe(s_strobe_i),.addr(saddr_i),.in(sdata_i),.out(degree)
);
+
+ setting_reg #(`FR_USER_1) sr_mode
+ (
.clock(clk_i),.reset(1'b0),.strobe(s_strobe_i),.addr(saddr_i),.in(sdata_i),
+ .out({loopback}) );
+
+ lfsr_constants constants(.degree_i(degree),.mask_o(mask),.len_o(len));
+
+ sounder_tx transmitter
+ (
.clk_i(clk_i),.rst_i(tx_rst_i),.ena_i(tx_enable_i),.strobe_i(tx_strobe_i),.mask_i(mask),
+ .tx_i_o(tx_i),.tx_q_o(tx_q) );
+
+ sounder_rx receiver
+ ( .clk_i(clk_i),.rst_i(rx_rst_i),.ena_i(rx_enable_i),
+
.rx_strobe_i(rx_strobe_i),.tx_strobe_i(tx_strobe_i),.mask_i(mask),.len_i(len),
+
.rx_in_i_i(rx_i),.rx_in_q_i(rx_q),.rx_i_o(rx_imp_i_o),.rx_q_o(rx_imp_q_o),
+ .rx_strobe_o(rx_strobe_o) );
+
+endmodule // sounder
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_rx.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_rx.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/sounder_rx.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_rx.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_rx.v 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,84 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+module sounder_rx(clk_i,rst_i,ena_i,rx_strobe_i,tx_strobe_i,mask_i,len_i,
+ rx_in_i_i,rx_in_q_i,rx_i_o,rx_q_o,rx_strobe_o);
+
+ input clk_i; // Master clock
+ input rst_i; // Subsystem reset
+ input ena_i; // Subsystem enable
+ input rx_strobe_i; // Strobe every received sample
+ input tx_strobe_i; // Strobe every transmitted sample
+
+ input [15:0] mask_i; // PN code LFSR mask
+ input [15:0] len_i; // PN code LFSR sequence length
+ input [15:0] rx_in_i_i; // I channel on receive
+ input [15:0] rx_in_q_i; // Q channel on receive
+
+ output [15:0] rx_i_o; // I channel of impulse response
+ output [15:0] rx_q_o; // Q channel of impulse response
+ output rx_strobe_o; // Impulse response value ready
+
+ // LFSR phase counter
+ reg [15:0] count;
+ wire cycle = (count == (len_i - 1));
+
+ always @(posedge clk_i)
+ if (rst_i | ~ena_i)
+ count <= 16'b0;
+ else
+ if (cycle)
+ count <= 16'b0;
+ else
+ count <= count + 16'b1;
+
+ // Retard LFSR phase once per cycle
+ wire lfsr_strobe = (tx_strobe_i & ~cycle);
+
+ // Recreate local reference of transmitted PN code
+ wire pn;
+ lfsr reference
+ (
.clk_i(clk_i),.rst_i(rst_i),.ena_i(ena_i),.strobe_i(lfsr_strobe),.mask_i(mask_i),.pn_o(pn)
);
+
+ wire [31:0] rx_i_ext, rx_q_ext;
+ sign_extend #(16,32) i_extend(rx_in_i_i, rx_i_ext);
+ sign_extend #(16,32) q_extend(rx_in_q_i, rx_q_ext);
+
+ reg [31:0] accum;
+ always @(posedge clk_i)
+ if (rst_i | ~ena_i)
+ accum <= 32'b0;
+ else
+ if (rx_strobe_i)
+ if (cycle)
+ accum <= 32'b0;
+ else
+ if (pn)
+ accum <= accum + rx_i_ext;
+ else
+ accum <= accum - rx_i_ext;
+
+ assign rx_i_o = accum[31:16];
+ assign rx_q_o = accum[15:0];
+ assign rx_strobe_o = rx_strobe_i & cycle;
+
+endmodule // sounder_rx
+
Deleted: gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_tx.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_tx.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/lib/sounder_tx.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_tx.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/lib/sounder_tx.v 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,45 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+`include "../../../../usrp/firmware/include/fpga_regs_common.v"
+`include "../../../../usrp/firmware/include/fpga_regs_standard.v"
+
+`define MAX_VALUE 16'h7FFF // 2s complement
+`define MIN_VALUE 16'h8000
+
+module sounder_tx(clk_i,rst_i,ena_i,strobe_i,mask_i,tx_i_o,tx_q_o);
+ input clk_i;
+ input rst_i;
+ input ena_i;
+ input strobe_i;
+ input [15:0] mask_i;
+ output [15:0] tx_i_o;
+ output [15:0] tx_q_o;
+
+ wire pn;
+
+ lfsr pn_code
+ (
.clk_i(clk_i),.rst_i(rst_i),.ena_i(ena_i),.strobe_i(strobe_i),.mask_i(mask_i),.pn_o(pn)
);
+
+ assign tx_i_o = pn ? `MAX_VALUE : `MIN_VALUE; // Bipolar
+ assign tx_q_o = 16'b0;
+
+endmodule // sounder_tx
Copied: gnuradio/trunk/gr-sounder/src/fpga/rbf (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/rbf)
Property changes on: gnuradio/trunk/gr-sounder/src/fpga/rbf
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
Deleted: gnuradio/trunk/gr-sounder/src/fpga/rbf/Makefile.am
Copied: gnuradio/trunk/gr-sounder/src/fpga/rbf/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/rbf/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/rbf/Makefile.am
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/rbf/Makefile.am 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,44 @@
+#
+# Copyright 2005,2006,2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
+datadir = $(prefix)/share/usrp
+
+rbfs = \
+ rev2/usrp_sounder.rbf \
+ rev4/usrp_sounder.rbf
+
+EXTRA_DIST = \
+ $(rbfs)
+
+
+install-data-local:
+ @for file in $(rbfs); do \
+ echo "$(INSTALL_DATA) $(srcdir)/$$file
$(DESTDIR)$(datadir)/$$file"; \
+ $(INSTALL_DATA) $(srcdir)/$$file $(DESTDIR)$(datadir)/$$file; \
+ done
+
+uninstall-local:
+ @for file in $(rbfs); do \
+ echo "$(RM) $(DESTDIR)$(datadir)/$$file"; \
+ $(RM) $(DESTDIR)$(datadir)/$$file; \
+ done
Copied: gnuradio/trunk/gr-sounder/src/fpga/rbf/rev2 (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/rbf/rev2)
Deleted: gnuradio/trunk/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf
Copied: gnuradio/trunk/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf (from rev
5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/rbf/rev2/usrp_sounder.rbf)
===================================================================
(Binary files differ)
Copied: gnuradio/trunk/gr-sounder/src/fpga/rbf/rev4 (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/rbf/rev4)
Deleted: gnuradio/trunk/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf
Copied: gnuradio/trunk/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf (from rev
5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/rbf/rev4/usrp_sounder.rbf)
===================================================================
(Binary files differ)
Copied: gnuradio/trunk/gr-sounder/src/fpga/top (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top)
Property changes on: gnuradio/trunk/gr-sounder/src/fpga/top
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
db
*.rpt
*.summary
*.rbf
*.qws
*.smsg
*.done
*.pin
*.sof
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/Makefile.am
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/Makefile.am
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/Makefile.am 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,43 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
+EXTRA_DIST = \
+ config.vh \
+ usrp_sounder.v \
+ usrp_sounder.csf \
+ usrp_sounder.esf \
+ usrp_sounder.psf \
+ usrp_sounder.qpf
+
+MOSTLYCLEANFILES = \
+ db/* \
+ *.rpt \
+ *.summary \
+ *.rbf \
+ *.qws \
+ *.smsg \
+ *.done \
+ *.pin \
+ *.sof
+
+
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/config.vh
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/config.vh (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/config.vh)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/config.vh
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/config.vh 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,22 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+// Uncomment to enable 64 MHz Tx clock, otherwise 32 MHz
+//`define TX_RATE_MAX
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.csf
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.csf (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/usrp_sounder.csf)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.csf
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.csf 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,444 @@
+COMPILER_SETTINGS
+{
+ IO_PLACEMENT_OPTIMIZATION = OFF;
+ ENABLE_DRC_SETTINGS = OFF;
+ PHYSICAL_SYNTHESIS_REGISTER_RETIMING = OFF;
+ PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION = OFF;
+ PHYSICAL_SYNTHESIS_COMBO_LOGIC = OFF;
+ DRC_FANOUT_EXCEEDING = 30;
+ DRC_REPORT_FANOUT_EXCEEDING = OFF;
+ DRC_TOP_FANOUT = 50;
+ DRC_REPORT_TOP_FANOUT = OFF;
+ RUN_DRC_DURING_COMPILATION = OFF;
+ ADV_NETLIST_OPT_RETIME_CORE_AND_IO = ON;
+ ADV_NETLIST_OPT_SYNTH_USE_FITTER_INFO = OFF;
+ ADV_NETLIST_OPT_SYNTH_GATE_RETIME = OFF;
+ ADV_NETLIST_OPT_SYNTH_WYSIWYG_REMAP = OFF;
+ SMART_COMPILE_IGNORES_TDC_FOR_STRATIX_PLL_CHANGES = OFF;
+ MERGE_HEX_FILE = OFF;
+ TRUE_WYSIWYG_FLOW = OFF;
+ SEED = 1;
+ FINAL_PLACEMENT_OPTIMIZATION = AUTOMATICALLY;
+ FAMILY = Cyclone;
+ DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+ DPRAM_32BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA1 = "MEGALAB COLUMN
1";
+ DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+ DPRAM_32BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "LOWER TO 1ESB UPPER TO 1";
+ DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_OUTPUT_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_DUAL_PORT_MODE_INPUT_EPXA1 = "DPRAM0 TO 1 DPRAM1 TO 2";
+ DPRAM_32BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_8BIT_16BIT_SINGLE_PORT_MODE_INPUT_EPXA1 = "MEGALAB COLUMN 1";
+ DPRAM_DUAL_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+ DPRAM_SINGLE_PORT_MODE_OTHER_SIGNALS_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO
4";
+ DPRAM_WIDE_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_DEEP_MODE_OTHER_SIGNALS_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_DUAL_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
+ DPRAM_SINGLE_PORT_MODE_OUTPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4ESB";
+ DPRAM_WIDE_MODE_OUTPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4ESB";
+ DPRAM_DEEP_MODE_OUTPUT_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_DUAL_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+ DPRAM_SINGLE_PORT_MODE_INPUT_EPXA4_10 = "DPRAM0 TO 3 DPRAM1 TO 4";
+ DPRAM_WIDE_MODE_INPUT_EPXA4_10 = "LOWER TO 3 UPPER TO 4";
+ DPRAM_DEEP_MODE_INPUT_EPXA4_10 = "MEGALAB COLUMN 3";
+ DPRAM_OTHER_SIGNALS_EPXA4_10 = "DEFAULT OTHER ROUTING OPTIONS";
+ DPRAM_OUTPUT_EPXA4_10 = "DEFAULT OUTPUT ROUTING OPTIONS";
+ DPRAM_INPUT_EPXA4_10 = "DEFAULT INPUT ROUTING OPTIONS";
+ STRIPE_TO_PLD_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
+ PLD_TO_STRIPE_INTERRUPTS_EPXA4_10 = "MEGALAB COLUMN 2";
+ PROCESSOR_DEBUG_EXTENSIONS_EPXA4_10 = "MEGALAB COLUMN 2";
+ STRIPE_TO_PLD_BRIDGE_EPXA4_10 = "MEGALAB COLUMN 1";
+ FAST_FIT_COMPILATION = OFF;
+ SIGNALPROBE_DURING_NORMAL_COMPILATION = OFF;
+ OPTIMIZE_IOC_REGISTER_PLACEMENT_FOR_TIMING = ON;
+ OPTIMIZE_TIMING = "NORMAL COMPILATION";
+ OPTIMIZE_HOLD_TIMING = OFF;
+ COMPILATION_LEVEL = FULL;
+ SAVE_DISK_SPACE = OFF;
+ SPEED_DISK_USAGE_TRADEOFF = NORMAL;
+ LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT = OFF;
+ SIGNALPROBE_ALLOW_OVERUSE = OFF;
+ FOCUS_ENTITY_NAME = |usrp_sounder;
+ ROUTING_BACK_ANNOTATION_MODE = OFF;
+ INC_PLC_MODE = OFF;
+ FIT_ONLY_ONE_ATTEMPT = OFF;
+}
+DEFAULT_DEVICE_OPTIONS
+{
+ GENERATE_CONFIG_HEXOUT_FILE = OFF;
+ GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON;
+ GENERATE_CONFIG_JBC_FILE = OFF;
+ GENERATE_CONFIG_JAM_FILE = OFF;
+ GENERATE_CONFIG_ISC_FILE = OFF;
+ GENERATE_CONFIG_SVF_FILE = OFF;
+ GENERATE_JBC_FILE_COMPRESSED = ON;
+ GENERATE_JBC_FILE = OFF;
+ GENERATE_JAM_FILE = OFF;
+ GENERATE_ISC_FILE = OFF;
+ GENERATE_SVF_FILE = OFF;
+ RESERVE_PIN = "AS INPUT TRI-STATED";
+ RESERVE_ALL_UNUSED_PINS = "AS OUTPUT DRIVING GROUND";
+ HEXOUT_FILE_COUNT_DIRECTION = UP;
+ HEXOUT_FILE_START_ADDRESS = 0;
+ GENERATE_HEX_FILE = OFF;
+ GENERATE_RBF_FILE = OFF;
+ GENERATE_TTF_FILE = OFF;
+ RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED";
+ RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF;
+ AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON;
+ EPROM_USE_CHECKSUM_AS_USERCODE = OFF;
+ FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_CONFIGURATION_DEVICE = AUTO;
+ CYCLONE_CONFIGURATION_DEVICE = AUTO;
+ FLEX10K_CONFIGURATION_DEVICE = AUTO;
+ FLEX6K_CONFIGURATION_DEVICE = AUTO;
+ MERCURY_CONFIGURATION_DEVICE = AUTO;
+ EXCALIBUR_CONFIGURATION_DEVICE = AUTO;
+ APEX20K_CONFIGURATION_DEVICE = AUTO;
+ USE_CONFIGURATION_DEVICE = ON;
+ ENABLE_INIT_DONE_OUTPUT = OFF;
+ FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
+ ENABLE_DEVICE_WIDE_OE = OFF;
+ ENABLE_DEVICE_WIDE_RESET = OFF;
+ RELEASE_CLEARS_BEFORE_TRI_STATES = OFF;
+ AUTO_RESTART_CONFIGURATION = OFF;
+ ENABLE_VREFB_PIN = OFF;
+ ENABLE_VREFA_PIN = OFF;
+ SECURITY_BIT = OFF;
+ USER_START_UP_CLOCK = OFF;
+ APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ CYCLONE_CONFIGURATION_SCHEME = "ACTIVE SERIAL";
+ STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ STRATIX_UPDATE_MODE = STANDARD;
+ USE_CHECKSUM_AS_USERCODE = OFF;
+ MAX7000_USE_CHECKSUM_AS_USERCODE = OFF;
+ MAX7000_JTAG_USER_CODE = FFFFFFFF;
+ FLEX10K_JTAG_USER_CODE = 7F;
+ MERCURY_JTAG_USER_CODE = FFFFFFFF;
+ APEX20K_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_JTAG_USER_CODE = FFFFFFFF;
+ MAX7000S_JTAG_USER_CODE = FFFF;
+ RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF;
+ ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ MAX7000_ENABLE_JTAG_BST_SUPPORT = ON;
+ ENABLE_JTAG_BST_SUPPORT = OFF;
+ CONFIGURATION_CLOCK_DIVISOR = 1;
+ CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ";
+ CLOCK_SOURCE = INTERNAL;
+ COMPRESSION_MODE = OFF;
+ ON_CHIP_BITSTREAM_DECOMPRESSION = OFF;
+}
+AUTO_SLD_HUB_ENTITY
+{
+ AUTO_INSERT_SLD_HUB_ENTITY = ENABLE;
+ HUB_INSTANCE_NAME = SLD_HUB_INST;
+ HUB_ENTITY_NAME = SLD_HUB;
+}
+SIGNALTAP_LOGIC_ANALYZER_SETTINGS
+{
+ ENABLE_SIGNALTAP = Off;
+ AUTO_ENABLE_SMART_COMPILE = On;
+}
+CHIP(usrp_sounder)
+{
+ DEVICE = EP1C12Q240C8;
+ DEVICE_FILTER_PACKAGE = "ANY QFP";
+ DEVICE_FILTER_PIN_COUNT = 240;
+ DEVICE_FILTER_SPEED_GRADE = ANY;
+ AUTO_RESTART_CONFIGURATION = OFF;
+ RELEASE_CLEARS_BEFORE_TRI_STATES = OFF;
+ USER_START_UP_CLOCK = OFF;
+ ENABLE_DEVICE_WIDE_RESET = OFF;
+ ENABLE_DEVICE_WIDE_OE = OFF;
+ ENABLE_INIT_DONE_OUTPUT = OFF;
+ FLEX10K_ENABLE_LOCK_OUTPUT = OFF;
+ ENABLE_JTAG_BST_SUPPORT = OFF;
+ MAX7000_ENABLE_JTAG_BST_SUPPORT = ON;
+ APEX20K_JTAG_USER_CODE = FFFFFFFF;
+ MERCURY_JTAG_USER_CODE = FFFFFFFF;
+ FLEX10K_JTAG_USER_CODE = 7F;
+ MAX7000_JTAG_USER_CODE = FFFFFFFF;
+ MAX7000S_JTAG_USER_CODE = FFFF;
+ STRATIX_JTAG_USER_CODE = FFFFFFFF;
+ APEX20K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ MERCURY_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX6K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ FLEX10K_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ EXCALIBUR_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ APEXII_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ STRATIX_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ CYCLONE_CONFIGURATION_SCHEME = "PASSIVE SERIAL";
+ USE_CONFIGURATION_DEVICE = OFF;
+ APEX20K_CONFIGURATION_DEVICE = AUTO;
+ MERCURY_CONFIGURATION_DEVICE = AUTO;
+ FLEX6K_CONFIGURATION_DEVICE = AUTO;
+ FLEX10K_CONFIGURATION_DEVICE = AUTO;
+ EXCALIBUR_CONFIGURATION_DEVICE = AUTO;
+ STRATIX_CONFIGURATION_DEVICE = AUTO;
+ CYCLONE_CONFIGURATION_DEVICE = AUTO;
+ STRATIX_UPDATE_MODE = STANDARD;
+ APEX20K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ MERCURY_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ FLEX10K_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ STRATIX_CONFIG_DEVICE_JTAG_USER_CODE = FFFFFFFF;
+ AUTO_INCREMENT_CONFIG_DEVICE_JTAG_USER_CODE = ON;
+ DISABLE_NCS_AND_OE_PULLUPS_ON_CONFIG_DEVICE = OFF;
+ COMPRESSION_MODE = OFF;
+ ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ FLEX6K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = OFF;
+ FLEX10K_ENABLE_LOW_VOLTAGE_MODE_ON_CONFIG_DEVICE = ON;
+ EPROM_USE_CHECKSUM_AS_USERCODE = OFF;
+ USE_CHECKSUM_AS_USERCODE = OFF;
+ MAX7000_USE_CHECKSUM_AS_USERCODE = OFF;
+ GENERATE_TTF_FILE = OFF;
+ GENERATE_RBF_FILE = ON;
+ GENERATE_HEX_FILE = OFF;
+ SECURITY_BIT = OFF;
+ ENABLE_VREFA_PIN = OFF;
+ ENABLE_VREFB_PIN = OFF;
+ GENERATE_SVF_FILE = OFF;
+ GENERATE_ISC_FILE = OFF;
+ GENERATE_JAM_FILE = OFF;
+ GENERATE_JBC_FILE = OFF;
+ GENERATE_JBC_FILE_COMPRESSED = ON;
+ GENERATE_CONFIG_SVF_FILE = OFF;
+ GENERATE_CONFIG_ISC_FILE = OFF;
+ GENERATE_CONFIG_JAM_FILE = OFF;
+ GENERATE_CONFIG_JBC_FILE = OFF;
+ GENERATE_CONFIG_JBC_FILE_COMPRESSED = ON;
+ GENERATE_CONFIG_HEXOUT_FILE = OFF;
+ ON_CHIP_BITSTREAM_DECOMPRESSION = OFF;
+ BASE_PIN_OUT_FILE_ON_SAMEFRAME_DEVICE = OFF;
+ HEXOUT_FILE_START_ADDRESS = 0;
+ HEXOUT_FILE_COUNT_DIRECTION = UP;
+ RESERVE_ALL_UNUSED_PINS = "AS INPUT TRI-STATED";
+ STRATIX_DEVICE_IO_STANDARD = LVTTL;
+ CLOCK_SOURCE = INTERNAL;
+ CONFIGURATION_CLOCK_FREQUENCY = "10 MHZ";
+ CONFIGURATION_CLOCK_DIVISOR = 1;
+ RESERVE_NWS_NRS_NCS_CS_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_RDYNBUSY_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_DATA7_THROUGH_DATA1_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_DATA0_AFTER_CONFIGURATION = "AS INPUT TRI-STATED";
+ RESERVE_NCEO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ RESERVE_ASDO_AFTER_CONFIGURATION = "USE AS REGULAR IO";
+ SCLK : LOCATION = Pin_101;
+ SDI : LOCATION = Pin_100;
+ SEN : LOCATION = Pin_98;
+ SLD : LOCATION = Pin_95;
+ adc1_data[0] : LOCATION = Pin_5;
+ adc1_data[10] : LOCATION = Pin_235;
+ adc1_data[11] : LOCATION = Pin_234;
+ adc1_data[1] : LOCATION = Pin_4;
+ adc1_data[2] : LOCATION = Pin_3;
+ adc1_data[3] : LOCATION = Pin_2;
+ adc1_data[4] : LOCATION = Pin_1;
+ adc1_data[4] : IO_STANDARD = LVTTL;
+ adc1_data[5] : LOCATION = Pin_240;
+ adc1_data[6] : LOCATION = Pin_239;
+ adc1_data[7] : LOCATION = Pin_238;
+ adc1_data[8] : LOCATION = Pin_237;
+ adc1_data[9] : LOCATION = Pin_236;
+ adc2_data[0] : LOCATION = Pin_20;
+ adc2_data[10] : LOCATION = Pin_8;
+ adc2_data[11] : LOCATION = Pin_7;
+ adc2_data[1] : LOCATION = Pin_19;
+ adc2_data[2] : LOCATION = Pin_18;
+ adc2_data[3] : LOCATION = Pin_17;
+ adc2_data[4] : LOCATION = Pin_16;
+ adc2_data[5] : LOCATION = Pin_15;
+ adc2_data[6] : LOCATION = Pin_14;
+ adc2_data[7] : LOCATION = Pin_13;
+ adc2_data[8] : LOCATION = Pin_12;
+ adc2_data[9] : LOCATION = Pin_11;
+ adc3_data[0] : LOCATION = Pin_200;
+ adc3_data[10] : LOCATION = Pin_184;
+ adc3_data[11] : LOCATION = Pin_183;
+ adc3_data[1] : LOCATION = Pin_197;
+ adc3_data[2] : LOCATION = Pin_196;
+ adc3_data[3] : LOCATION = Pin_195;
+ adc3_data[4] : LOCATION = Pin_194;
+ adc3_data[5] : LOCATION = Pin_193;
+ adc3_data[6] : LOCATION = Pin_188;
+ adc3_data[7] : LOCATION = Pin_187;
+ adc3_data[8] : LOCATION = Pin_186;
+ adc3_data[9] : LOCATION = Pin_185;
+ adc4_data[0] : LOCATION = Pin_222;
+ adc4_data[10] : LOCATION = Pin_203;
+ adc4_data[11] : LOCATION = Pin_202;
+ adc4_data[1] : LOCATION = Pin_219;
+ adc4_data[2] : LOCATION = Pin_217;
+ adc4_data[3] : LOCATION = Pin_216;
+ adc4_data[4] : LOCATION = Pin_215;
+ adc4_data[5] : LOCATION = Pin_214;
+ adc4_data[6] : LOCATION = Pin_213;
+ adc4_data[7] : LOCATION = Pin_208;
+ adc4_data[8] : LOCATION = Pin_207;
+ adc4_data[9] : LOCATION = Pin_206;
+ adc_oeb[0] : LOCATION = Pin_228;
+ adc_oeb[1] : LOCATION = Pin_21;
+ adc_oeb[2] : LOCATION = Pin_181;
+ adc_oeb[3] : LOCATION = Pin_218;
+ adc_otr[0] : LOCATION = Pin_233;
+ adc_otr[1] : LOCATION = Pin_6;
+ adc_otr[2] : LOCATION = Pin_182;
+ adc_otr[3] : LOCATION = Pin_201;
+ adclk0 : LOCATION = Pin_224;
+ adclk1 : LOCATION = Pin_226;
+ clk0 : LOCATION = Pin_28;
+ clk0 : RESERVE_PIN = "AS INPUT TRI-STATED";
+ clk0 : IO_STANDARD = LVTTL;
+ clk1 : LOCATION = Pin_29;
+ clk1 : RESERVE_PIN = "AS INPUT TRI-STATED";
+ clk1 : IO_STANDARD = LVTTL;
+ clk3 : LOCATION = Pin_152;
+ clk3 : RESERVE_PIN = "AS INPUT TRI-STATED";
+ clk3 : IO_STANDARD = LVTTL;
+ clk_120mhz : LOCATION = Pin_153;
+ clk_120mhz : IO_STANDARD = LVTTL;
+ clk_out : LOCATION = Pin_63;
+ clk_out : IO_STANDARD = LVTTL;
+ dac1_data[0] : LOCATION = Pin_165;
+ dac1_data[10] : LOCATION = Pin_177;
+ dac1_data[11] : LOCATION = Pin_178;
+ dac1_data[12] : LOCATION = Pin_179;
+ dac1_data[13] : LOCATION = Pin_180;
+ dac1_data[1] : LOCATION = Pin_166;
+ dac1_data[2] : LOCATION = Pin_167;
+ dac1_data[3] : LOCATION = Pin_168;
+ dac1_data[4] : LOCATION = Pin_169;
+ dac1_data[5] : LOCATION = Pin_170;
+ dac1_data[6] : LOCATION = Pin_173;
+ dac1_data[7] : LOCATION = Pin_174;
+ dac1_data[8] : LOCATION = Pin_175;
+ dac1_data[9] : LOCATION = Pin_176;
+ dac2_data[0] : LOCATION = Pin_159;
+ dac2_data[10] : LOCATION = Pin_163;
+ dac2_data[11] : LOCATION = Pin_139;
+ dac2_data[12] : LOCATION = Pin_164;
+ dac2_data[13] : LOCATION = Pin_138;
+ dac2_data[1] : LOCATION = Pin_158;
+ dac2_data[2] : LOCATION = Pin_160;
+ dac2_data[3] : LOCATION = Pin_156;
+ dac2_data[4] : LOCATION = Pin_161;
+ dac2_data[5] : LOCATION = Pin_144;
+ dac2_data[6] : LOCATION = Pin_162;
+ dac2_data[7] : LOCATION = Pin_141;
+ dac2_data[8] : LOCATION = Pin_143;
+ dac2_data[9] : LOCATION = Pin_140;
+ dac3_data[0] : LOCATION = Pin_122;
+ dac3_data[10] : LOCATION = Pin_134;
+ dac3_data[11] : LOCATION = Pin_135;
+ dac3_data[12] : LOCATION = Pin_136;
+ dac3_data[13] : LOCATION = Pin_137;
+ dac3_data[1] : LOCATION = Pin_123;
+ dac3_data[2] : LOCATION = Pin_124;
+ dac3_data[3] : LOCATION = Pin_125;
+ dac3_data[4] : LOCATION = Pin_126;
+ dac3_data[5] : LOCATION = Pin_127;
+ dac3_data[6] : LOCATION = Pin_128;
+ dac3_data[7] : LOCATION = Pin_131;
+ dac3_data[8] : LOCATION = Pin_132;
+ dac3_data[9] : LOCATION = Pin_133;
+ dac4_data[0] : LOCATION = Pin_104;
+ dac4_data[10] : LOCATION = Pin_118;
+ dac4_data[11] : LOCATION = Pin_119;
+ dac4_data[12] : LOCATION = Pin_120;
+ dac4_data[13] : LOCATION = Pin_121;
+ dac4_data[1] : LOCATION = Pin_105;
+ dac4_data[2] : LOCATION = Pin_106;
+ dac4_data[3] : LOCATION = Pin_107;
+ dac4_data[4] : LOCATION = Pin_108;
+ dac4_data[5] : LOCATION = Pin_113;
+ dac4_data[6] : LOCATION = Pin_114;
+ dac4_data[7] : LOCATION = Pin_115;
+ dac4_data[8] : LOCATION = Pin_116;
+ dac4_data[9] : LOCATION = Pin_117;
+ enable_rx : LOCATION = Pin_88;
+ enable_tx : LOCATION = Pin_93;
+ gndbus[0] : LOCATION = Pin_223;
+ gndbus[0] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[0] : IO_STANDARD = LVTTL;
+ gndbus[1] : LOCATION = Pin_225;
+ gndbus[1] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[1] : IO_STANDARD = LVTTL;
+ gndbus[2] : LOCATION = Pin_227;
+ gndbus[2] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[2] : IO_STANDARD = LVTTL;
+ gndbus[3] : LOCATION = Pin_62;
+ gndbus[3] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[3] : IO_STANDARD = LVTTL;
+ gndbus[4] : LOCATION = Pin_64;
+ gndbus[4] : RESERVE_PIN = "AS INPUT TRI-STATED";
+ gndbus[4] : IO_STANDARD = LVTTL;
+ misc_pins[0] : LOCATION = Pin_87;
+ misc_pins[0] : IO_STANDARD = LVTTL;
+ misc_pins[10] : LOCATION = Pin_76;
+ misc_pins[10] : IO_STANDARD = LVTTL;
+ misc_pins[11] : LOCATION = Pin_74;
+ misc_pins[11] : IO_STANDARD = LVTTL;
+ misc_pins[1] : LOCATION = Pin_86;
+ misc_pins[1] : IO_STANDARD = LVTTL;
+ misc_pins[2] : LOCATION = Pin_85;
+ misc_pins[2] : IO_STANDARD = LVTTL;
+ misc_pins[3] : LOCATION = Pin_84;
+ misc_pins[3] : IO_STANDARD = LVTTL;
+ misc_pins[4] : LOCATION = Pin_83;
+ misc_pins[4] : IO_STANDARD = LVTTL;
+ misc_pins[5] : LOCATION = Pin_82;
+ misc_pins[5] : IO_STANDARD = LVTTL;
+ misc_pins[6] : LOCATION = Pin_79;
+ misc_pins[6] : IO_STANDARD = LVTTL;
+ misc_pins[7] : LOCATION = Pin_78;
+ misc_pins[7] : IO_STANDARD = LVTTL;
+ misc_pins[8] : LOCATION = Pin_77;
+ misc_pins[8] : IO_STANDARD = LVTTL;
+ misc_pins[9] : LOCATION = Pin_75;
+ misc_pins[9] : IO_STANDARD = LVTTL;
+ reset : LOCATION = Pin_94;
+ usbclk : LOCATION = Pin_55;
+ usbctl[0] : LOCATION = Pin_56;
+ usbctl[1] : LOCATION = Pin_54;
+ usbctl[2] : LOCATION = Pin_53;
+ usbctl[3] : LOCATION = Pin_58;
+ usbctl[4] : LOCATION = Pin_57;
+ usbctl[5] : LOCATION = Pin_44;
+ usbdata[0] : LOCATION = Pin_73;
+ usbdata[10] : LOCATION = Pin_41;
+ usbdata[11] : LOCATION = Pin_39;
+ usbdata[12] : LOCATION = Pin_38;
+ usbdata[12] : IO_STANDARD = LVTTL;
+ usbdata[13] : LOCATION = Pin_37;
+ usbdata[14] : LOCATION = Pin_24;
+ usbdata[15] : LOCATION = Pin_23;
+ usbdata[1] : LOCATION = Pin_68;
+ usbdata[2] : LOCATION = Pin_67;
+ usbdata[3] : LOCATION = Pin_66;
+ usbdata[4] : LOCATION = Pin_65;
+ usbdata[5] : LOCATION = Pin_61;
+ usbdata[6] : LOCATION = Pin_60;
+ usbdata[7] : LOCATION = Pin_59;
+ usbdata[8] : LOCATION = Pin_43;
+ usbdata[9] : LOCATION = Pin_42;
+ usbrdy[0] : LOCATION = Pin_45;
+ usbrdy[1] : LOCATION = Pin_46;
+ usbrdy[2] : LOCATION = Pin_47;
+ usbrdy[3] : LOCATION = Pin_48;
+ usbrdy[4] : LOCATION = Pin_49;
+ usbrdy[5] : LOCATION = Pin_50;
+ clear_status : LOCATION = Pin_99;
+}
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.esf
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.esf (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/usrp_sounder.esf)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.esf
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.esf 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,14 @@
+SIMULATOR_SETTINGS
+{
+ ESTIMATE_POWER_CONSUMPTION = OFF;
+ GLITCH_INTERVAL = 1NS;
+ GLITCH_DETECTION = OFF;
+ SIMULATION_COVERAGE = ON;
+ CHECK_OUTPUTS = OFF;
+ SETUP_HOLD_DETECTION = OFF;
+ POWER_ESTIMATION_START_TIME = "0 NS";
+ ADD_DEFAULT_PINS_TO_SIMULATION_OUTPUT_WAVEFORMS = ON;
+ SIMULATION_MODE = TIMING;
+ START_TIME = 0NS;
+ USE_COMPILER_SETTINGS = usrp_sounder;
+}
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.psf
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.psf (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/usrp_sounder.psf)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.psf
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.psf 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,312 @@
+DEFAULT_DESIGN_ASSISTANT_SETTINGS
+{
+ HCPY_ALOAD_SIGNALS = OFF;
+ HCPY_VREF_PINS = OFF;
+ HCPY_CAT = OFF;
+ HCPY_ILLEGAL_HC_DEV_PKG = OFF;
+ ACLK_RULE_IMSZER_ADOMAIN = OFF;
+ ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF;
+ ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF;
+ ACLK_CAT = OFF;
+ SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF;
+ SIGNALRACE_CAT = OFF;
+ NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF;
+ NONSYNCHSTRUCT_RULE_SRLATCH = OFF;
+ NONSYNCHSTRUCT_RULE_DLATCH = OFF;
+ NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF;
+ NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF;
+ NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF;
+ NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF;
+ NONSYNCHSTRUCT_RULE_REG_LOOP = OFF;
+ NONSYNCHSTRUCT_RULE_COMBLOOP = OFF;
+ NONSYNCHSTRUCT_CAT = OFF;
+ NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF;
+ TIMING_RULE_COIN_CLKEDGE = OFF;
+ TIMING_RULE_SHIFT_REG = OFF;
+ TIMING_RULE_HIGH_FANOUTS = OFF;
+ TIMING_CAT = OFF;
+ RESET_RULE_ALL = OFF;
+ RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF;
+ RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF;
+ RESET_RULE_REG_ASNYCH = OFF;
+ RESET_RULE_COMB_ASYNCH_RESET = OFF;
+ RESET_RULE_IMSYNCH_EXRESET = OFF;
+ RESET_RULE_UNSYNCH_EXRESET = OFF;
+ RESET_RULE_INPINS_RESETNET = OFF;
+ RESET_CAT = OFF;
+ CLK_RULE_ALL = OFF;
+ CLK_RULE_MIX_EDGES = OFF;
+ CLK_RULE_CLKNET_CLKSPINES = OFF;
+ CLK_RULE_INPINS_CLKNET = OFF;
+ CLK_RULE_GATING_SCHEME = OFF;
+ CLK_RULE_INV_CLOCK = OFF;
+ CLK_RULE_COMB_CLOCK = OFF;
+ CLK_CAT = OFF;
+ HCPY_EXCEED_USER_IO_USAGE = OFF;
+ HCPY_EXCEED_RAM_USAGE = OFF;
+ NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF;
+ SIGNALRACE_RULE_TRISTATE = OFF;
+ ASSG_RULE_MISSING_TIMING = OFF;
+ ASSG_RULE_MISSING_FMAX = OFF;
+ ASSG_CAT = OFF;
+}
+SYNTHESIS_FITTING_SETTINGS
+{
+ AUTO_SHIFT_REGISTER_RECOGNITION = ON;
+ AUTO_DSP_RECOGNITION = ON;
+ AUTO_RAM_RECOGNITION = ON;
+ REMOVE_DUPLICATE_LOGIC = ON;
+ AUTO_TURBO_BIT = ON;
+ AUTO_MERGE_PLLS = ON;
+ AUTO_OPEN_DRAIN_PINS = ON;
+ AUTO_PARALLEL_EXPANDERS = ON;
+ AUTO_FAST_OUTPUT_ENABLE_REGISTERS = OFF;
+ AUTO_FAST_OUTPUT_REGISTERS = OFF;
+ AUTO_FAST_INPUT_REGISTERS = OFF;
+ AUTO_CASCADE_CHAINS = ON;
+ AUTO_CARRY_CHAINS = ON;
+ AUTO_DELAY_CHAINS = ON;
+ MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH = 4;
+ PARALLEL_EXPANDER_CHAIN_LENGTH = 16;
+ CASCADE_CHAIN_LENGTH = 2;
+ STRATIX_CARRY_CHAIN_LENGTH = 70;
+ MERCURY_CARRY_CHAIN_LENGTH = 48;
+ FLEX10K_CARRY_CHAIN_LENGTH = 32;
+ FLEX6K_CARRY_CHAIN_LENGTH = 32;
+ CARRY_CHAIN_LENGTH = 48;
+ CARRY_OUT_PINS_LCELL_INSERT = ON;
+ NORMAL_LCELL_INSERT = ON;
+ AUTO_LCELL_INSERTION = ON;
+ ALLOW_XOR_GATE_USAGE = ON;
+ AUTO_PACKED_REGISTERS_STRATIX = NORMAL;
+ AUTO_PACKED_REGISTERS = OFF;
+ AUTO_PACKED_REG_CYCLONE = NORMAL;
+ FLEX10K_OPTIMIZATION_TECHNIQUE = AREA;
+ FLEX6K_OPTIMIZATION_TECHNIQUE = AREA;
+ MERCURY_OPTIMIZATION_TECHNIQUE = AREA;
+ APEX20K_OPTIMIZATION_TECHNIQUE = SPEED;
+ MAX7000_OPTIMIZATION_TECHNIQUE = SPEED;
+ STRATIX_OPTIMIZATION_TECHNIQUE = SPEED;
+ CYCLONE_OPTIMIZATION_TECHNIQUE = AREA;
+ FLEX10K_TECHNOLOGY_MAPPER = LUT;
+ FLEX6K_TECHNOLOGY_MAPPER = LUT;
+ MERCURY_TECHNOLOGY_MAPPER = LUT;
+ APEX20K_TECHNOLOGY_MAPPER = LUT;
+ MAX7000_TECHNOLOGY_MAPPER = "PRODUCT TERM";
+ STRATIX_TECHNOLOGY_MAPPER = LUT;
+ AUTO_IMPLEMENT_IN_ROM = OFF;
+ AUTO_GLOBAL_MEMORY_CONTROLS = OFF;
+ AUTO_GLOBAL_REGISTER_CONTROLS = ON;
+ AUTO_GLOBAL_OE = ON;
+ AUTO_GLOBAL_CLOCK = ON;
+ USE_LPM_FOR_AHDL_OPERATORS = ON;
+ LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF;
+ ENABLE_BUS_HOLD_CIRCUITRY = OFF;
+ WEAK_PULL_UP_RESISTOR = OFF;
+ TURBO_BIT = ON;
+ MAX7000_IGNORE_SOFT_BUFFERS = OFF;
+ IGNORE_SOFT_BUFFERS = ON;
+ MAX7000_IGNORE_LCELL_BUFFERS = AUTO;
+ IGNORE_LCELL_BUFFERS = OFF;
+ IGNORE_ROW_GLOBAL_BUFFERS = OFF;
+ IGNORE_GLOBAL_BUFFERS = OFF;
+ IGNORE_CASCADE_BUFFERS = OFF;
+ IGNORE_CARRY_BUFFERS = OFF;
+ REMOVE_DUPLICATE_REGISTERS = ON;
+ REMOVE_REDUNDANT_LOGIC_CELLS = OFF;
+ ALLOW_POWER_UP_DONT_CARE = ON;
+ PCI_IO = OFF;
+ NOT_GATE_PUSH_BACK = ON;
+ SLOW_SLEW_RATE = OFF;
+ DSP_BLOCK_BALANCING = AUTO;
+ STATE_MACHINE_PROCESSING = AUTO;
+}
+DEFAULT_HARDCOPY_SETTINGS
+{
+ HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS";
+}
+DEFAULT_TIMING_REQUIREMENTS
+{
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ RUN_ALL_TIMING_ANALYSES = ON;
+ IGNORE_CLOCK_SETTINGS = OFF;
+ DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE";
+ CUT_OFF_IO_PIN_FEEDBACK = ON;
+ CUT_OFF_CLEAR_AND_PRESET_PATHS = ON;
+ CUT_OFF_READ_DURING_WRITE_PATHS = ON;
+ CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON;
+ DO_MIN_ANALYSIS = ON;
+ DO_MIN_TIMING = OFF;
+ NUMBER_OF_PATHS_TO_REPORT = 200;
+ NUMBER_OF_DESTINATION_TO_REPORT = 10;
+ NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10;
+ MAX_SCC_SIZE = 50;
+}
+HDL_SETTINGS
+{
+ VERILOG_INPUT_VERSION = VERILOG_2001;
+ ENABLE_IP_DEBUG = OFF;
+ VHDL_INPUT_VERSION = VHDL93;
+ VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF;
+}
+PROJECT_INFO(usrp_sounder)
+{
+ ORIGINAL_QUARTUS_VERSION = 3.0;
+ PROJECT_CREATION_TIME_DATE = "00:14:04 JULY 13, 2003";
+ LAST_QUARTUS_VERSION = 3.0;
+ SHOW_REGISTRATION_MESSAGE = ON;
+ USER_LIBRARIES = "h:\\gnuradio\\trunk\\usrp\\fpga\\megacells";
+}
+THIRD_PARTY_EDA_TOOLS(usrp_sounder)
+{
+ EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>";
+ EDA_SIMULATION_TOOL = "<NONE>";
+ EDA_TIMING_ANALYSIS_TOOL = "<NONE>";
+ EDA_BOARD_DESIGN_TOOL = "<NONE>";
+ EDA_FORMAL_VERIFICATION_TOOL = "<NONE>";
+ EDA_RESYNTHESIS_TOOL = "<NONE>";
+}
+EDA_TOOL_SETTINGS(eda_design_synthesis)
+{
+ EDA_INPUT_GND_NAME = GND;
+ EDA_INPUT_VCC_NAME = VCC;
+ EDA_SHOW_LMF_MAPPING_MESSAGES = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_INPUT_DATA_FORMAT = EDIF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_simulation)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_timing_analysis)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ EDA_LAUNCH_CMD_LINE_TOOL = OFF;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_board_design)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_formal_verification)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_palace)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ RESYNTHESIS_RETIMING = FULL;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+}
+CLOCK(clk_120mhz)
+{
+ FMAX_REQUIREMENT = "120.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(usbclk)
+{
+ FMAX_REQUIREMENT = "48.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(SCLK)
+{
+ FMAX_REQUIREMENT = "1.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(adclk0)
+{
+ FMAX_REQUIREMENT = "60.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(adclk1)
+{
+ FMAX_REQUIREMENT = "60.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qpf
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qpf (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/usrp_sounder.qpf)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qpf
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qpf 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,29 @@
+# Copyright (C) 1991-2004 Altera Corporation
+# Any megafunction design, and related netlist (encrypted or decrypted),
+# support information, device programming or simulation file, and any other
+# associated documentation or information provided by Altera or a partner
+# under Altera's Megafunction Partnership Program may be used only
+# to program PLD devices (but not masked PLD devices) from Altera. Any
+# other use of such megafunction design, netlist, support information,
+# device programming or simulation file, or any other related documentation
+# or information is prohibited for any other purpose, including, but not
+# limited to modification, reverse engineering, de-compiling, or use with
+# any other silicon devices, unless such use is explicitly licensed under
+# a separate agreement with Altera or a megafunction partner. Title to the
+# intellectual property, including patents, copyrights, trademarks, trade
+# secrets, or maskworks, embodied in any such megafunction design, netlist,
+# support information, device programming or simulation file, or any other
+# related documentation or information provided by Altera or a megafunction
+# partner, remains with Altera, the megafunction partner, or their respective
+# licensors. No other licenses, including any licenses needed under any third
+# party's intellectual property, are provided herein.
+
+
+
+QUARTUS_VERSION = "7.0"
+DATE = "09:00:00 April 17, 2007"
+
+
+# Active Revisions
+
+PROJECT_REVISION = "usrp_sounder"
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qsf
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qsf (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/usrp_sounder.qsf)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qsf
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.qsf 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,392 @@
+# Copyright (C) 1991-2005 Altera Corporation
+# Your use of Altera Corporation's design tools, logic functions
+# and other software and tools, and its AMPP partner logic
+# functions, and any output files any of the foregoing
+# (including device programming or simulation files), and any
+# associated documentation or information are expressly subject
+# to the terms and conditions of the Altera Program License
+# Subscription Agreement, Altera MegaCore Function License
+# Agreement, or other applicable license agreement, including,
+# without limitation, that your use is for the sole purpose of
+# programming logic devices manufactured by Altera and sold by
+# Altera or its authorized distributors. Please refer to the
+# applicable agreement for further details.
+
+
+# The default values for assignments are stored in the file
+# usrp_sounder_assignment_defaults.qdf
+# If this file doesn't exist, and for assignments not listed, see file
+# assignment_defaults.qdf
+
+# Altera recommends that you do not modify this file. This
+# file is updated automatically by the Quartus II software
+# and any changes you make may be lost or overwritten.
+
+
+# Project-Wide Assignments
+# ========================
+set_global_assignment -name ORIGINAL_QUARTUS_VERSION 3.0
+set_global_assignment -name PROJECT_CREATION_TIME_DATE "00:14:04 JULY 13,
2003"
+set_global_assignment -name LAST_QUARTUS_VERSION 7.0
+
+# Pin & Location Assignments
+# ==========================
+set_global_assignment -name RESERVE_PIN "AS INPUT TRI-STATED"
+set_location_assignment PIN_29 -to SCLK
+set_location_assignment PIN_117 -to SDI
+set_location_assignment PIN_28 -to usbclk
+set_location_assignment PIN_107 -to usbctl[0]
+set_location_assignment PIN_106 -to usbctl[1]
+set_location_assignment PIN_105 -to usbctl[2]
+set_location_assignment PIN_100 -to usbdata[0]
+set_location_assignment PIN_84 -to usbdata[10]
+set_location_assignment PIN_83 -to usbdata[11]
+set_location_assignment PIN_82 -to usbdata[12]
+set_location_assignment PIN_79 -to usbdata[13]
+set_location_assignment PIN_78 -to usbdata[14]
+set_location_assignment PIN_77 -to usbdata[15]
+set_location_assignment PIN_99 -to usbdata[1]
+set_location_assignment PIN_98 -to usbdata[2]
+set_location_assignment PIN_95 -to usbdata[3]
+set_location_assignment PIN_94 -to usbdata[4]
+set_location_assignment PIN_93 -to usbdata[5]
+set_location_assignment PIN_88 -to usbdata[6]
+set_location_assignment PIN_87 -to usbdata[7]
+set_location_assignment PIN_86 -to usbdata[8]
+set_location_assignment PIN_85 -to usbdata[9]
+set_location_assignment PIN_104 -to usbrdy[0]
+set_location_assignment PIN_101 -to usbrdy[1]
+set_location_assignment PIN_76 -to FX2_1
+set_location_assignment PIN_75 -to FX2_2
+set_location_assignment PIN_74 -to FX2_3
+set_location_assignment PIN_116 -to io_rx_a[0]
+set_location_assignment PIN_115 -to io_rx_a[1]
+set_location_assignment PIN_114 -to io_rx_a[2]
+set_location_assignment PIN_113 -to io_rx_a[3]
+set_location_assignment PIN_108 -to io_rx_a[4]
+set_location_assignment PIN_195 -to io_rx_a[5]
+set_location_assignment PIN_196 -to io_rx_a[6]
+set_location_assignment PIN_197 -to io_rx_a[7]
+set_location_assignment PIN_200 -to io_rx_a[8]
+set_location_assignment PIN_201 -to io_rx_a[9]
+set_location_assignment PIN_202 -to io_rx_a[10]
+set_location_assignment PIN_203 -to io_rx_a[11]
+set_location_assignment PIN_206 -to io_rx_a[12]
+set_location_assignment PIN_207 -to io_rx_a[13]
+set_location_assignment PIN_208 -to io_rx_a[14]
+set_location_assignment PIN_214 -to io_rx_b[0]
+set_location_assignment PIN_215 -to io_rx_b[1]
+set_location_assignment PIN_216 -to io_rx_b[2]
+set_location_assignment PIN_217 -to io_rx_b[3]
+set_location_assignment PIN_218 -to io_rx_b[4]
+set_location_assignment PIN_219 -to io_rx_b[5]
+set_location_assignment PIN_222 -to io_rx_b[6]
+set_location_assignment PIN_223 -to io_rx_b[7]
+set_location_assignment PIN_224 -to io_rx_b[8]
+set_location_assignment PIN_225 -to io_rx_b[9]
+set_location_assignment PIN_226 -to io_rx_b[10]
+set_location_assignment PIN_227 -to io_rx_b[11]
+set_location_assignment PIN_228 -to io_rx_b[12]
+set_location_assignment PIN_233 -to io_rx_b[13]
+set_location_assignment PIN_234 -to io_rx_b[14]
+set_location_assignment PIN_175 -to io_tx_a[0]
+set_location_assignment PIN_176 -to io_tx_a[1]
+set_location_assignment PIN_177 -to io_tx_a[2]
+set_location_assignment PIN_178 -to io_tx_a[3]
+set_location_assignment PIN_179 -to io_tx_a[4]
+set_location_assignment PIN_180 -to io_tx_a[5]
+set_location_assignment PIN_181 -to io_tx_a[6]
+set_location_assignment PIN_182 -to io_tx_a[7]
+set_location_assignment PIN_183 -to io_tx_a[8]
+set_location_assignment PIN_184 -to io_tx_a[9]
+set_location_assignment PIN_185 -to io_tx_a[10]
+set_location_assignment PIN_186 -to io_tx_a[11]
+set_location_assignment PIN_187 -to io_tx_a[12]
+set_location_assignment PIN_188 -to io_tx_a[13]
+set_location_assignment PIN_193 -to io_tx_a[14]
+set_location_assignment PIN_73 -to io_tx_b[0]
+set_location_assignment PIN_68 -to io_tx_b[1]
+set_location_assignment PIN_67 -to io_tx_b[2]
+set_location_assignment PIN_66 -to io_tx_b[3]
+set_location_assignment PIN_65 -to io_tx_b[4]
+set_location_assignment PIN_64 -to io_tx_b[5]
+set_location_assignment PIN_63 -to io_tx_b[6]
+set_location_assignment PIN_62 -to io_tx_b[7]
+set_location_assignment PIN_61 -to io_tx_b[8]
+set_location_assignment PIN_60 -to io_tx_b[9]
+set_location_assignment PIN_59 -to io_tx_b[10]
+set_location_assignment PIN_58 -to io_tx_b[11]
+set_location_assignment PIN_57 -to io_tx_b[12]
+set_location_assignment PIN_56 -to io_tx_b[13]
+set_location_assignment PIN_55 -to io_tx_b[14]
+set_location_assignment PIN_152 -to master_clk
+set_location_assignment PIN_144 -to rx_a_a[0]
+set_location_assignment PIN_143 -to rx_a_a[1]
+set_location_assignment PIN_141 -to rx_a_a[2]
+set_location_assignment PIN_140 -to rx_a_a[3]
+set_location_assignment PIN_139 -to rx_a_a[4]
+set_location_assignment PIN_138 -to rx_a_a[5]
+set_location_assignment PIN_137 -to rx_a_a[6]
+set_location_assignment PIN_136 -to rx_a_a[7]
+set_location_assignment PIN_135 -to rx_a_a[8]
+set_location_assignment PIN_134 -to rx_a_a[9]
+set_location_assignment PIN_133 -to rx_a_a[10]
+set_location_assignment PIN_132 -to rx_a_a[11]
+set_location_assignment PIN_23 -to rx_a_b[0]
+set_location_assignment PIN_21 -to rx_a_b[1]
+set_location_assignment PIN_20 -to rx_a_b[2]
+set_location_assignment PIN_19 -to rx_a_b[3]
+set_location_assignment PIN_18 -to rx_a_b[4]
+set_location_assignment PIN_17 -to rx_a_b[5]
+set_location_assignment PIN_16 -to rx_a_b[6]
+set_location_assignment PIN_15 -to rx_a_b[7]
+set_location_assignment PIN_14 -to rx_a_b[8]
+set_location_assignment PIN_13 -to rx_a_b[9]
+set_location_assignment PIN_12 -to rx_a_b[10]
+set_location_assignment PIN_11 -to rx_a_b[11]
+set_location_assignment PIN_131 -to rx_b_a[0]
+set_location_assignment PIN_128 -to rx_b_a[1]
+set_location_assignment PIN_127 -to rx_b_a[2]
+set_location_assignment PIN_126 -to rx_b_a[3]
+set_location_assignment PIN_125 -to rx_b_a[4]
+set_location_assignment PIN_124 -to rx_b_a[5]
+set_location_assignment PIN_123 -to rx_b_a[6]
+set_location_assignment PIN_122 -to rx_b_a[7]
+set_location_assignment PIN_121 -to rx_b_a[8]
+set_location_assignment PIN_120 -to rx_b_a[9]
+set_location_assignment PIN_119 -to rx_b_a[10]
+set_location_assignment PIN_118 -to rx_b_a[11]
+set_location_assignment PIN_8 -to rx_b_b[0]
+set_location_assignment PIN_7 -to rx_b_b[1]
+set_location_assignment PIN_6 -to rx_b_b[2]
+set_location_assignment PIN_5 -to rx_b_b[3]
+set_location_assignment PIN_4 -to rx_b_b[4]
+set_location_assignment PIN_3 -to rx_b_b[5]
+set_location_assignment PIN_2 -to rx_b_b[6]
+set_location_assignment PIN_240 -to rx_b_b[7]
+set_location_assignment PIN_239 -to rx_b_b[8]
+set_location_assignment PIN_238 -to rx_b_b[9]
+set_location_assignment PIN_237 -to rx_b_b[10]
+set_location_assignment PIN_236 -to rx_b_b[11]
+set_location_assignment PIN_156 -to SDO
+set_location_assignment PIN_153 -to SEN_FPGA
+set_location_assignment PIN_159 -to tx_a[0]
+set_location_assignment PIN_160 -to tx_a[1]
+set_location_assignment PIN_161 -to tx_a[2]
+set_location_assignment PIN_162 -to tx_a[3]
+set_location_assignment PIN_163 -to tx_a[4]
+set_location_assignment PIN_164 -to tx_a[5]
+set_location_assignment PIN_165 -to tx_a[6]
+set_location_assignment PIN_166 -to tx_a[7]
+set_location_assignment PIN_167 -to tx_a[8]
+set_location_assignment PIN_168 -to tx_a[9]
+set_location_assignment PIN_169 -to tx_a[10]
+set_location_assignment PIN_170 -to tx_a[11]
+set_location_assignment PIN_173 -to tx_a[12]
+set_location_assignment PIN_174 -to tx_a[13]
+set_location_assignment PIN_38 -to tx_b[0]
+set_location_assignment PIN_39 -to tx_b[1]
+set_location_assignment PIN_41 -to tx_b[2]
+set_location_assignment PIN_42 -to tx_b[3]
+set_location_assignment PIN_43 -to tx_b[4]
+set_location_assignment PIN_44 -to tx_b[5]
+set_location_assignment PIN_45 -to tx_b[6]
+set_location_assignment PIN_46 -to tx_b[7]
+set_location_assignment PIN_47 -to tx_b[8]
+set_location_assignment PIN_48 -to tx_b[9]
+set_location_assignment PIN_49 -to tx_b[10]
+set_location_assignment PIN_50 -to tx_b[11]
+set_location_assignment PIN_53 -to tx_b[12]
+set_location_assignment PIN_54 -to tx_b[13]
+set_location_assignment PIN_158 -to TXSYNC_A
+set_location_assignment PIN_37 -to TXSYNC_B
+set_location_assignment PIN_235 -to io_rx_b[15]
+set_location_assignment PIN_24 -to io_tx_b[15]
+set_location_assignment PIN_213 -to io_rx_a[15]
+set_location_assignment PIN_194 -to io_tx_a[15]
+set_location_assignment PIN_1 -to MYSTERY_SIGNAL
+
+# Timing Assignments
+# ==================
+set_global_assignment -name INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS
OFF
+
+# Analysis & Synthesis Assignments
+# ================================
+set_global_assignment -name SAVE_DISK_SPACE OFF
+set_global_assignment -name DEVICE_FILTER_PACKAGE "ANY QFP"
+set_global_assignment -name DEVICE_FILTER_PIN_COUNT 240
+set_global_assignment -name EDA_DESIGN_ENTRY_SYNTHESIS_TOOL "<None>"
+set_global_assignment -name FAMILY Cyclone
+set_global_assignment -name CYCLONE_OPTIMIZATION_TECHNIQUE BALANCED
+set_global_assignment -name STRATIX_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name APEX20K_OPTIMIZATION_TECHNIQUE SPEED
+set_global_assignment -name TOP_LEVEL_ENTITY usrp_sounder
+set_global_assignment -name VHDL_SHOW_LMF_MAPPING_MESSAGES OFF
+set_global_assignment -name USER_LIBRARIES
"h:\\gnuradio\\trunk\\usrp\\fpga\\megacells"
+set_global_assignment -name AUTO_ENABLE_SMART_COMPILE ON
+
+# Fitter Assignments
+# ==================
+set_global_assignment -name DEVICE EP1C12Q240C8
+set_global_assignment -name CYCLONE_CONFIGURATION_SCHEME "PASSIVE SERIAL"
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS "AS INPUT TRI-STATED"
+set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
+set_global_assignment -name OPTIMIZE_TIMING "NORMAL COMPILATION"
+set_global_assignment -name PHYSICAL_SYNTHESIS_COMBO_LOGIC OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_DUPLICATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_REGISTER_RETIMING OFF
+set_global_assignment -name IO_PLACEMENT_OPTIMIZATION OFF
+set_global_assignment -name PHYSICAL_SYNTHESIS_EFFORT NORMAL
+set_global_assignment -name INC_PLC_MODE OFF
+set_global_assignment -name ROUTING_BACK_ANNOTATION_MODE OFF
+set_instance_assignment -name IO_STANDARD LVTTL -to usbdata[12]
+set_global_assignment -name STRATIX_DEVICE_IO_STANDARD LVTTL
+set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1
+
+# Timing Analysis Assignments
+# ===========================
+set_global_assignment -name MAX_SCC_SIZE 50
+
+# EDA Netlist Writer Assignments
+# ==============================
+set_global_assignment -name EDA_SIMULATION_TOOL "<None>"
+set_global_assignment -name EDA_TIMING_ANALYSIS_TOOL "<NONE>"
+set_global_assignment -name EDA_BOARD_DESIGN_TOOL "<NONE>"
+set_global_assignment -name EDA_FORMAL_VERIFICATION_TOOL "<NONE>"
+set_global_assignment -name EDA_RESYNTHESIS_TOOL "<NONE>"
+
+# Assembler Assignments
+# =====================
+set_global_assignment -name USE_CONFIGURATION_DEVICE OFF
+set_global_assignment -name GENERATE_RBF_FILE ON
+set_global_assignment -name RESERVE_ALL_UNUSED_PINS_NO_OUTPUT_GND "AS INPUT
TRI-STATED"
+set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF
+
+# Simulator Assignments
+# =====================
+set_global_assignment -name START_TIME "0 ns"
+set_global_assignment -name GLITCH_INTERVAL "1 ns"
+
+# Design Assistant Assignments
+# ============================
+set_global_assignment -name DRC_REPORT_TOP_FANOUT OFF
+set_global_assignment -name DRC_REPORT_FANOUT_EXCEEDING OFF
+set_global_assignment -name ASSG_CAT OFF
+set_global_assignment -name ASSG_RULE_MISSING_FMAX OFF
+set_global_assignment -name ASSG_RULE_MISSING_TIMING OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ASYN_RAM OFF
+set_global_assignment -name CLK_CAT OFF
+set_global_assignment -name CLK_RULE_COMB_CLOCK OFF
+set_global_assignment -name CLK_RULE_INV_CLOCK OFF
+set_global_assignment -name CLK_RULE_GATING_SCHEME OFF
+set_global_assignment -name CLK_RULE_INPINS_CLKNET OFF
+set_global_assignment -name CLK_RULE_CLKNET_CLKSPINES OFF
+set_global_assignment -name CLK_RULE_MIX_EDGES OFF
+set_global_assignment -name RESET_CAT OFF
+set_global_assignment -name RESET_RULE_INPINS_RESETNET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_EXRESET OFF
+set_global_assignment -name RESET_RULE_COMB_ASYNCH_RESET OFF
+set_global_assignment -name RESET_RULE_UNSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name RESET_RULE_IMSYNCH_ASYNCH_DOMAIN OFF
+set_global_assignment -name TIMING_CAT OFF
+set_global_assignment -name TIMING_RULE_SHIFT_REG OFF
+set_global_assignment -name TIMING_RULE_COIN_CLKEDGE OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE OFF
+set_global_assignment -name NONSYNCHSTRUCT_CAT OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_COMBLOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_REG_LOOP OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_DELAY_CHAIN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_RIPPLE_CLK OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_SRLATCH OFF
+set_global_assignment -name NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED OFF
+set_global_assignment -name SIGNALRACE_CAT OFF
+set_global_assignment -name ACLK_CAT OFF
+set_global_assignment -name ACLK_RULE_NO_SZER_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_SZER_BTW_ACLK_DOMAIN OFF
+set_global_assignment -name ACLK_RULE_IMSZER_ADOMAIN OFF
+set_global_assignment -name HCPY_CAT OFF
+set_global_assignment -name HCPY_VREF_PINS OFF
+
+# SignalTap II Assignments
+# ========================
+set_global_assignment -name HUB_ENTITY_NAME SLD_HUB
+set_global_assignment -name HUB_INSTANCE_NAME SLD_HUB_INST
+set_global_assignment -name ENABLE_SIGNALTAP OFF
+
+# LogicLock Region Assignments
+# ============================
+set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF
+
+# -----------------
+# start CLOCK(SCLK)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id SCLK
+set_global_assignment -name FMAX_REQUIREMENT "1 MHz" -section_id SCLK
+
+# end CLOCK(SCLK)
+# ---------------
+
+# -----------------------
+# start CLOCK(master_clk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id master_clk
+set_global_assignment -name FMAX_REQUIREMENT "64 MHz" -section_id master_clk
+
+# end CLOCK(master_clk)
+# ---------------------
+
+# -------------------
+# start CLOCK(usbclk)
+
+ # Timing Assignments
+ # ==================
+set_global_assignment -name DUTY_CYCLE 50 -section_id usbclk
+set_global_assignment -name FMAX_REQUIREMENT "48 MHz" -section_id usbclk
+
+# end CLOCK(usbclk)
+# -----------------
+
+# ----------------------
+# start ENTITY(usrp_sounder)
+
+ # Timing Assignments
+ # ==================
+set_instance_assignment -name CLOCK_SETTINGS SCLK -to SCLK
+set_instance_assignment -name CLOCK_SETTINGS usbclk -to usbclk
+set_instance_assignment -name CLOCK_SETTINGS master_clk -to master_clk
+
+# end ENTITY(usrp_sounder)
+# --------------------
+
+set_instance_assignment -name PARTITION_HIERARCHY no_file_for_top_partition
-to | -section_id Top
+set_global_assignment -name PARTITION_NETLIST_TYPE SOURCE -section_id Top
+
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/sign_extend.v
+set_global_assignment -name VERILOG_FILE ../lib/lfsr_constants.v
+set_global_assignment -name VERILOG_FILE ../lib/sounder.v
+set_global_assignment -name VERILOG_FILE ../lib/lfsr.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/atr_delay.v
+set_global_assignment -name VERILOG_FILE ../lib/dac_interface.v
+set_global_assignment -name VERILOG_FILE ../lib/dacpll.v
+set_global_assignment -name VERILOG_FILE ../lib/sounder_rx.v
+set_global_assignment -name VERILOG_FILE ../lib/sounder_tx.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/rx_buffer.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/setting_reg.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/strobe_gen.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/clk_divider.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/bidir_reg.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/adc_interface.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/gen_sync.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/io_pins.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/master_control.v
+set_global_assignment -name VERILOG_FILE ../../../../usrp/fpga/sdr_lib/rssi.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/rx_dcoffset.v
+set_global_assignment -name VERILOG_FILE
../../../../usrp/fpga/sdr_lib/serial_io.v
+set_global_assignment -name VERILOG_FILE usrp_sounder.v
\ No newline at end of file
Deleted: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.v
Copied: gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.v (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/fpga/top/usrp_sounder.v)
===================================================================
--- gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.v
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/fpga/top/usrp_sounder.v 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,199 @@
+// -*- verilog -*-
+//
+// USRP - Universal Software Radio Peripheral
+//
+// Copyright (C) 2003,2004 Matt Ettus
+// Copyright (C) 2007 Corgan Enterprises LLC
+//
+// This program is free software; you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation; either version 2 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program; if not, write to the Free Software
+// Foundation, Inc., 51 Franklin Street, Boston, MA 02110-1301 USA
+//
+
+// Top level module for a full setup with DUCs and DDCs
+
+// Define DEBUG_OWNS_IO_PINS if we're using the daughterboard i/o pins
+// for debugging info. NB, This can kill the m'board and/or d'board if you
+// have anything except basic d'boards installed.
+
+// Uncomment the following to include optional circuitry
+
+module usrp_sounder
+(output MYSTERY_SIGNAL,
+ input master_clk,
+ input SCLK,
+ input SDI,
+ inout SDO,
+ input SEN_FPGA,
+
+ input FX2_1,
+ output FX2_2,
+ output FX2_3,
+
+ input wire [11:0] rx_a_a,
+ input wire [11:0] rx_b_a,
+ input wire [11:0] rx_a_b,
+ input wire [11:0] rx_b_b,
+
+ output wire [13:0] tx_a,
+ output wire [13:0] tx_b,
+
+ output wire TXSYNC_A,
+ output wire TXSYNC_B,
+
+ // USB interface
+ input usbclk,
+ input wire [2:0] usbctl,
+ output wire [1:0] usbrdy,
+ inout [15:0] usbdata, // NB Careful, inout
+
+ // These are the general purpose i/o's that go to the daughterboard slots
+ inout wire [15:0] io_tx_a,
+ inout wire [15:0] io_tx_b,
+ inout wire [15:0] io_rx_a,
+ inout wire [15:0] io_rx_b
+ );
+ wire [15:0] debugdata,debugctrl;
+ assign MYSTERY_SIGNAL = 1'b0;
+
+ wire clk64;
+
+ // wire WR = usbctl[0];
+ wire RD = usbctl[1];
+ wire OE = usbctl[2];
+
+ wire have_pkt_rdy;
+ assign usbrdy[0] = 1'b0; // have_space;
+ assign usbrdy[1] = have_pkt_rdy;
+
+ wire tx_underrun, rx_overrun;
+ wire clear_status = FX2_1;
+ assign FX2_2 = rx_overrun;
+ assign FX2_3 = 1'b0; // tx_underrun;
+
+ wire [15:0] usbdata_out;
+
+ wire [3:0] rx_numchan;
+ wire enable_tx, enable_rx;
+ wire tx_dsp_reset, rx_dsp_reset, tx_bus_reset, rx_bus_reset;
+
+ // Tri-state bus macro
+ bustri bustri( .data(usbdata_out),.enabledt(OE),.tridata(usbdata) );
+
+ assign clk64 = master_clk;
+
+ // TX
+ wire tx_sample_strobe;
+ wire tx_empty;
+
+ wire serial_strobe;
+ wire [6:0] serial_addr;
+ wire [31:0] serial_data;
+
+
////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Transmit Side
+
+ wire [15:0] tx_i, tx_q;
+ wire [15:0] tx_dac;
+
+ dac_interface dac(.clk_i(clk64),.rst_i(tx_dsp_reset),.ena_i(enable_tx),
+ .strobe_i(tx_sample_strobe),.tx_i_i(tx_i),.tx_q_i(tx_q),
+ .tx_data_o(tx_dac),.tx_sync_o(TXSYNC_A));
+
+ assign tx_a = tx_dac[15:2];
+
+ // Wedge DAC #2 at zero
+ assign TXSYNC_B = 1'b0;
+ assign tx_b = 14'b0;
+
+
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Receive Side
+ wire rx_sample_strobe, rx_strobe;
+ wire [15:0] rx_adc0_i, rx_adc0_q;
+ wire [15:0] rx_buf_i, rx_buf_q;
+
+ adc_interface
adc_interface(.clock(clk64),.reset(rx_dsp_reset),.enable(enable_rx),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+
.rx_a_a(rx_a_a),.rx_b_a(rx_b_a),.rx_a_b(),.rx_b_b(),
+ .rssi_0(),.rssi_1(),.rssi_2(),.rssi_3(),
+ .ddc0_in_i(rx_adc0_i),.ddc0_in_q(rx_adc0_q),
+ .ddc1_in_i(),.ddc1_in_q(),
+ .ddc2_in_i(),.ddc2_in_q(),
+
.ddc3_in_i(),.ddc3_in_q(),.rx_numchan(rx_numchan) );
+
+ rx_buffer rx_buffer
+ ( .usbclk(usbclk),.bus_reset(rx_bus_reset),.reset(rx_dsp_reset),
+ .reset_regs(rx_dsp_reset),
+
.usbdata(usbdata_out),.RD(RD),.have_pkt_rdy(have_pkt_rdy),.rx_overrun(rx_overrun),
+ .channels(rx_numchan),
+ .ch_0(rx_buf_i),.ch_1(rx_buf_q),
+ .ch_2(),.ch_3(),
+ .ch_4(),.ch_5(),
+ .ch_6(),.ch_7(),
+ .rxclk(clk64),.rxstrobe(rx_strobe),
+ .clear_status(clear_status),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .debugbus() );
+
+
+
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Top level application
+
+ sounder sounder
+ (
.clk_i(clk64),.saddr_i(serial_addr),.sdata_i(serial_data),.s_strobe_i(serial_strobe),
+
.tx_rst_i(tx_dsp_reset),.tx_enable_i(enable_tx),.tx_strobe_i(tx_sample_strobe),
+ .tx_dac_i_o(tx_i),.tx_dac_q_o(tx_q),
+
.rx_rst_i(rx_dsp_reset),.rx_enable_i(enable_rx),.rx_strobe_i(rx_sample_strobe),.rx_strobe_o(rx_strobe),
+
.rx_adc_i_i(rx_adc0_i),.rx_adc_q_i(rx_adc0_q),.rx_imp_i_o(rx_buf_i),.rx_imp_q_o(rx_buf_q)
+ );
+
+
+
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // Control Functions
+
+ wire [31:0] capabilities;
+ assign capabilities[7] = 0; // `TX_CAP_HB;
+ assign capabilities[6:4] = 2; // `TX_CAP_NCHAN;
+ assign capabilities[3] = 0; // `RX_CAP_HB;
+ assign capabilities[2:0] = 2; // `RX_CAP_NCHAN;
+
+ serial_io serial_io
+ ( .master_clk(clk64),.serial_clock(SCLK),.serial_data_in(SDI),
+ .enable(SEN_FPGA),.reset(1'b0),.serial_data_out(SDO),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .readback_0(),.readback_1(),.readback_2(capabilities),.readback_3(),
+ .readback_4(),.readback_5(),.readback_6(),.readback_7()
+ );
+
+ wire [15:0] reg_0,reg_1,reg_2,reg_3;
+ master_control master_control
+ ( .master_clk(clk64),.usbclk(usbclk),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+ .tx_bus_reset(tx_bus_reset),.rx_bus_reset(rx_bus_reset),
+ .tx_dsp_reset(tx_dsp_reset),.rx_dsp_reset(rx_dsp_reset),
+ .enable_tx(enable_tx),.enable_rx(enable_rx),
+ .interp_rate(),.decim_rate(),
+ .tx_sample_strobe(tx_sample_strobe),.strobe_interp(),
+ .rx_sample_strobe(rx_sample_strobe),.strobe_decim(),
+ .tx_empty(tx_empty),
+ .debug_0(),.debug_1(),
+ .debug_2(),.debug_3(),
+ .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3) );
+
+ io_pins io_pins
+ (.io_0(io_tx_a),.io_1(io_rx_a),.io_2(io_tx_b),.io_3(io_rx_b),
+ .reg_0(reg_0),.reg_1(reg_1),.reg_2(reg_2),.reg_3(reg_3),
+ .clock(clk64),.rx_reset(rx_dsp_reset),.tx_reset(tx_dsp_reset),
+
.serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe));
+
+endmodule // usrp_sounder
Copied: gnuradio/trunk/gr-sounder/src/lib (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/lib)
Property changes on: gnuradio/trunk/gr-sounder/src/lib
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
Deleted: gnuradio/trunk/gr-sounder/src/lib/Makefile.am
Copied: gnuradio/trunk/gr-sounder/src/lib/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/lib/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/src/lib/Makefile.am
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/lib/Makefile.am 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,22 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
Copied: gnuradio/trunk/gr-sounder/src/python (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/python)
Property changes on: gnuradio/trunk/gr-sounder/src/python
___________________________________________________________________
Name: svn:ignore
+ Makefile
Makefile.in
run_tests
*.pyc
Deleted: gnuradio/trunk/gr-sounder/src/python/Makefile.am
Copied: gnuradio/trunk/gr-sounder/src/python/Makefile.am (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/python/Makefile.am)
===================================================================
--- gnuradio/trunk/gr-sounder/src/python/Makefile.am
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/python/Makefile.am 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,32 @@
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+include $(top_srcdir)/Makefile.common
+
+EXTRA_DIST = \
+ usrp_sounder.py \
+ qa_nothing.py \
+ run_tests.in
+
+bin_SCRIPTS = \
+ usrp_sounder.py
+
+MOSTLYCLEANFILES = *~ *.pyc *.pyo
Deleted: gnuradio/trunk/gr-sounder/src/python/qa_nothing.py
Copied: gnuradio/trunk/gr-sounder/src/python/qa_nothing.py (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/python/qa_nothing.py)
===================================================================
Deleted: gnuradio/trunk/gr-sounder/src/python/run_tests.in
Copied: gnuradio/trunk/gr-sounder/src/python/run_tests.in (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/python/run_tests.in)
===================================================================
--- gnuradio/trunk/gr-sounder/src/python/run_tests.in
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/python/run_tests.in 2007-04-25 23:38:21 UTC
(rev 5117)
@@ -0,0 +1,10 @@
+#!/bin/sh
+
+# 1st parameter is absolute path to component source directory
+# 2nd parameter is absolute path to component build directory
+# 3rd parameter is path to Python QA directory
+
address@hidden@/run_tests.sh \
+ @abs_top_srcdir@/gr-sounder \
+ @abs_top_builddir@/gr-sounder \
+ @srcdir@
Deleted: gnuradio/trunk/gr-sounder/src/python/usrp_sounder.py
Copied: gnuradio/trunk/gr-sounder/src/python/usrp_sounder.py (from rev 5116,
gnuradio/branches/developers/jcorgan/snd/gr-sounder/src/python/usrp_sounder.py)
===================================================================
--- gnuradio/trunk/gr-sounder/src/python/usrp_sounder.py
(rev 0)
+++ gnuradio/trunk/gr-sounder/src/python/usrp_sounder.py 2007-04-25
23:38:21 UTC (rev 5117)
@@ -0,0 +1,130 @@
+#!/usr/bin/env python
+#
+# Copyright 2007 Free Software Foundation, Inc.
+#
+# This file is part of GNU Radio
+#
+# GNU Radio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# GNU Radio is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with GNU Radio; see the file COPYING. If not, write to
+# the Free Software Foundation, Inc., 51 Franklin Street,
+# Boston, MA 02110-1301, USA.
+#
+
+from gnuradio import gr, usrp
+from gnuradio import eng_notation
+from gnuradio.eng_option import eng_option
+from optparse import OptionParser
+import sys, time
+
+n2s = eng_notation.num_to_str
+
+# Set to 0 for 32 MHz tx clock, 1 for 64 MHz tx clock
+# Must match config.vh in FPGA code
+TX_RATE_MAX = 0
+_tx_freq_divisor = 32e6*(TX_RATE_MAX+1)
+
+class sounder_tx:
+ def __init__(self, frequency, degree, loopback):
+ self.trans = usrp.sink_s(fpga_filename='usrp_sounder.rbf')
+ self.subdev_spec = usrp.pick_tx_subdevice(self.trans)
+ self.subdev = usrp.selected_subdev(self.trans, self.subdev_spec)
+ self.trans.tune(0, self.subdev, frequency)
+ self.set_degree(degree);
+ self.set_loopback(loopback)
+
+ def turn_on(self):
+ self.trans.start()
+
+ def turn_off(self):
+ self.trans.stop()
+
+ def set_degree(self, value):
+ return self.trans._write_fpga_reg(usrp.FR_USER_0, value);
+
+ def set_loopback(self, value):
+ return self.trans._write_fpga_reg(usrp.FR_USER_1, value==True);
+
+class sounder_rx:
+ def __init__(self, frequency, degree, samples):
+ self.fg = gr.flow_graph()
+ self.rcvr = usrp.source_s(fpga_filename='usrp_sounder.rbf',
decim_rate=8)
+ self.subdev_spec = usrp.pick_rx_subdevice(self.rcvr)
+ self.subdev = usrp.selected_subdev(self.rcvr, self.subdev_spec)
+ self.rcvr.tune(0, self.subdev, frequency)
+ self.set_degree(degree);
+ self.sink = gr.file_sink(gr.sizeof_short, "output.dat")
+
+ if samples >= 0:
+ self.head = gr.head(gr.sizeof_short, 2*samples*gr.sizeof_short)
+ self.fg.connect(self.rcvr, self.head, self.sink)
+ else:
+ self.fg.connect(self.rcvr, self.sink)
+
+ def receive(self):
+ self.fg.run()
+
+ def set_degree(self, value):
+ return self.rcvr._write_fpga_reg(usrp.FR_USER_0, value);
+
+def main():
+ parser = OptionParser(option_class=eng_option)
+ parser.add_option("-f", "--frequency", type="eng_float", default=0.0,
+ help="set frequency to FREQ in Hz, default is %default",
metavar="FREQ")
+
+ parser.add_option("-t", "--transmit", action="store_true", default=False,
+ help="enable sounding transmitter")
+
+ parser.add_option("-r", "--receive", action="store_true", default=False,
+ help="enable sounding receiver")
+
+ parser.add_option("-d", "--degree", type="int", default=16,
+ help="set souding sequence degree (len=2^degree-1),
default is %default")
+
+ parser.add_option("-n", "--samples", type="int", default=-1,
+ help="number of samples to capture on receive, default
is infinite")
+
+ parser.add_option("-l", "--loopback", action="store_true", default=False,
+ help="enable digital loopback, default is disabled")
+
+ (options, args) = parser.parse_args()
+
+ if len(args) != 0 or not (options.transmit | options.receive):
+ parser.print_help()
+ sys.exit(1)
+
+ print "Using PN code degree of", options.degree, "length",
2**options.degree-1
+ print "Sounding frequency range is", n2s(options.frequency-16e6), "to",
n2s(options.frequency+16e6)
+
+ if (options.transmit):
+ print "Enabling sounder transmitter."
+ if (options.loopback):
+ print "Enabling digital loopback."
+ tx = sounder_tx(options.frequency, options.degree, options.loopback)
+ tx.turn_on()
+
+ try:
+ if (options.receive):
+ print "Enabling sounder receiver."
+ rx = sounder_rx(options.frequency, options.degree, options.samples)
+ rx.receive()
+ else:
+ if (options.transmit):
+ while (True): time.sleep(1.0)
+
+ except KeyboardInterrupt:
+ if (options.transmit):
+ tx.turn_off()
+
+
+if __name__ == "__main__":
+ main()
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Commit-gnuradio] r5117 - in gnuradio/trunk: . config gr-sounder gr-sounder/doc gr-sounder/src gr-sounder/src/fpga gr-sounder/src/fpga/lib gr-sounder/src/fpga/rbf gr-sounder/src/fpga/rbf/rev2 gr-sounder/src/fpga/rbf/rev4 gr-sounder/src/fpga/top gr-sounder/src/lib gr-sounder/src/python,
jcorgan <=