[Commit-gnuradio] r7488 - usrp-hw/trunk/sym/generated

[matt]

Author: matt
Date: 2008-01-21 21:50:45 -0700 (Mon, 21 Jan 2008)
New Revision: 7488

Added:
   usrp-hw/trunk/sym/generated/adl5375-MIX.src
   usrp-hw/trunk/sym/generated/adl5375-PWR.src
Modified:
   usrp-hw/trunk/sym/generated/Makefile
Log:
quadrature upconverter


Modified: usrp-hw/trunk/sym/generated/Makefile
===================================================================
--- usrp-hw/trunk/sym/generated/Makefile        2008-01-22 04:27:41 UTC (rev 
7487)
+++ usrp-hw/trunk/sym/generated/Makefile        2008-01-22 04:50:45 UTC (rev 
7488)
@@ -194,6 +194,8 @@
        xc3sd1800acs484-RHCLK.sym \
        xc3sd1800acs484-JTAG.sym \
        xc3sd1800acs484-PWR.sym \
+       adl5375-MIX.sym \
+       adl5375-PWR.sym \
        spi-flash-so16.sym
 
 

Added: usrp-hw/trunk/sym/generated/adl5375-MIX.src
===================================================================
--- usrp-hw/trunk/sym/generated/adl5375-MIX.src                         (rev 0)
+++ usrp-hw/trunk/sym/generated/adl5375-MIX.src 2008-01-22 04:50:45 UTC (rev 
7488)
@@ -0,0 +1,59 @@
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=1400
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADL5375-MIX
+device=ADL5375
+refdes=U?
+footprint=LFCSP24
+description=Analog Devices Quadrature Modulator
+documentation=http://www.analog.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=400 MHz to 6 GHz
+comment=Part 2 of 2
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+21             in      line    l               IBBP
+22             in      dot     l               \_IBBN\_
+10             in      line    l               QBBP
+9              in      dot     l               \_QBBN\_
+16             out     line    r               RFout
+3              in      line    l               LOIP
+4              in      dot     l               \_LOIN\_
+1              in      dot     l               \_EN\_

Added: usrp-hw/trunk/sym/generated/adl5375-PWR.src
===================================================================
--- usrp-hw/trunk/sym/generated/adl5375-PWR.src                         (rev 0)
+++ usrp-hw/trunk/sym/generated/adl5375-PWR.src 2008-01-22 04:50:45 UTC (rev 
7488)
@@ -0,0 +1,72 @@
+
+# This is the template file for creating symbols with tragesym
+# every line starting with '#' is a comment line.
+
+[options]
+# rotate_labels rotates the pintext of top and bottom pins
+# wordswap swaps labels if the pin is on the right side an looks like this:
+# "PB1 (CLK)"
+wordswap=yes
+rotate_labels=no
+sort_labels=no
+generate_pinseq=yes
+sym_width=2000
+pinwidthvertikal=400
+pinwidthhorizontal=400
+
+[geda_attr]
+# name will be printed in the top of the symbol
+# if you have a device with slots, you'll have to use slot= and slotdef=
+# use comment= if there are special information you want to add
+version=20060906
+name=ADL5375-PWR
+device=ADL5375
+refdes=U?
+footprint=LFCSP24
+description=Analog Devices Quadrature Modulator
+documentation=http://www.analog.com
+author=mettus
+numslots=0
+#slot=1
+#slotdef=1:
+#slotdef=2:
+#slotdef=3:
+#slotdef=4:
+comment=400 MHz to 6 GHz
+comment=Part 1 of 2
+#comment=
+
+[pins]
+# tabseparated list of pin descriptions
+# pinnr is the physical number of the pin
+# seq is the pinseq= attribute, leave it blank if it doesn't matter
+# type can be (in, out, io, oc, oe, pas, tp, tri, clk, pwr)
+# style can be (line,dot,clk,dotclk,none). none if only want to add a net
+# posit. can be (l,r,t,b) or empty for nets
+# net specifies the name of the Vcc or GND name
+# label represents the pinlabel. 
+#      negation lines can be added with _Q_ 
+#      if you want to add a "_" or "\" use "\_" and "\\" as escape sequences
+#-----------------------------------------------------
+#pinnr seq     type    style   posit.  net     label   
+#-----------------------------------------------------
+2              pwr     line    r               COM
+5              pwr     line    r               COM
+8              pwr     line    r               COM
+11             pwr     line    r               COM
+12             pwr     line    r               COM
+14             pwr     line    r               COM
+17             pwr     line    r               COM
+19             pwr     line    r               COM
+20             pwr     line    r               COM
+23             pwr     line    r               COM
+25             pwr     line    r               GND_EP
+
+18             pwr     line    l               VPS1
+24             pwr     line    l               VPS2
+
+6              pas     line    b               NC
+7              pas     line    b               NC
+13             pas     line    b               NC
+15             pas     line    b               NC
+