[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[SCM] GNU Inetutils branch, master, updated. inetutils-1_9_1-224-gf88d5
|
From: |
Mats Erik Andersson |
|
Subject: |
[SCM] GNU Inetutils branch, master, updated. inetutils-1_9_1-224-gf88d586 |
|
Date: |
Thu, 13 Dec 2012 13:56:22 +0000 |
This is an automated email from the git hooks/post-receive script. It was
generated because a ref change was pushed to the repository containing
the project "GNU Inetutils ".
The branch, master has been updated
via f88d5862859fa7416d62becd1482ef6a677ed805 (commit)
from 3d9eadf7d2e1325cb42fdee7d875b675403304a8 (commit)
Those revisions listed above that are new to this repository have
not appeared on any other notification email; so we list those
revisions in full, below.
- Log -----------------------------------------------------------------
http://git.savannah.gnu.org/cgit/inetutils.git/commit/?id=f88d5862859fa7416d62becd1482ef6a677ed805
commit f88d5862859fa7416d62becd1482ef6a677ed805
Author: Mats Erik Andersson <address@hidden>
Date: Thu Dec 13 14:54:10 2012 +0100
Documentation (silent change)
diff --git a/TODO b/TODO
index a296de9..050313a 100644
--- a/TODO
+++ b/TODO
@@ -129,13 +129,9 @@ Ability to ping multiple host in one go.
* ifconfig
** Implement flags support in changeif.c and options.c
-** Port to BSD.
** Make sure it is a drop in replacement at least for the most
common options on Linux and BSD.
-** Parse options before taking actions: `ifconfig --down -i gif0'
- segfaults, but `ifconfig -i gif0 --down' does not.
-
** Some systems can provide more interfaces than
SIOCGIFCONF/if_nameindex, interfaces which are usually not UP but
registered nevertheless. (linux: /prov/net/dev). Some support for
diff --git a/doc/inetutils.texi b/doc/inetutils.texi
index 8ac50ed..4d03776 100644
--- a/doc/inetutils.texi
+++ b/doc/inetutils.texi
@@ -33,7 +33,7 @@
* ftpd: (inetutils)ftpd invocation. FTP Daemon.
* hostname: (inetutils)hostname invocation. Show or set system host name.
* dnsdomainname: (inetutils)dnsdomainname invocation. Show DNS domain
name.
-* inetd: (inetutils)inetd invocation. Interner super-server.
+* inetd: (inetutils)inetd invocation. Internet super-server.
* logger: (inetutils)logger invocation. Send messages to the system
log.
* ping: (inetutils)ping invocation. Packets to network hosts.
* rcp: (inetutils)rcp invocation. Remote copy
@@ -112,14 +112,14 @@ Clients
* tftp invocation:: TFTP client.
* rsh invocation:: Remote shell.
* rlogin invocation:: Remote login.
-* rexec invocation:: Remote execution client.
* rcp invocation:: Remote copy
+* rexec invocation:: Remote execution client.
* talk invocation:: Talk client.
* telnet invocation:: User interface to TELNET.
Daemons
-* inetd invocation:: Interner super-server.
+* inetd invocation:: Internet super-server.
* syslogd invocation:: Syslog server.
* ftpd invocation:: FTP Daemon.
* tftpd invocation:: TFTP server.
@@ -230,12 +230,23 @@ nonzero.
@chapter @command{hostname}: Show or set system host name.
@cindex hostname
address@hidden is a program to show or set the name of host system.
address@hidden is a program to show or to set the name of a
+host system.
+
address@hidden
+Synopsis:
@example
-hostname address@hidden@dots{}] address@hidden
+hostname address@hidden@dots{}]
+hostname @var{name}
@end example
address@hidden
+where @var{name} is the name to be used by the running host.
+
address@hidden Command line options
address@hidden options}
+
@table @option
@item -a
@itemx --aliases
@@ -257,8 +268,8 @@ Get DNS domain name.
@opindex --long
Get DNS host name or Fully Qualified Domain Name.
address@hidden -F
address@hidden --file
address@hidden -F @var{file}
address@hidden address@hidden
@opindex -F
@opindex --file
Set host name or NIS domain name from FILE.
@@ -292,30 +303,42 @@ Get NIS/YP domain name.
system's fully qualified domain name. For example, if the FQDN of the
system is @code{name.example.org} the command will show
@code{example.org}.
+The output is not necessarily related to the NIS/YP domain name.
The tool uses gethostname to get the host name of the system and
-getaddrinfo to resolve it into a canonical name. The part after the
-first period (@code{.}) of the canonical name is shown.
+then getaddrinfo to resolve it into a canonical name.
+The domain part of the canonical name is shown, i.e., the part
+after the first address@hidden(@code{.}) of the official name.
-The output is not necessarily related to the NIS/YP domain name.
address@hidden
+Synopsis:
@example
dnsdomainname address@hidden@dots{}]
@end example
address@hidden
+There is no command specific option.
+
@node logger invocation
@chapter @command{logger}: Send messages to system log
@cindex logger
@command{logger} is a program to send entries to system log. It
provides a shell command interface similar to the system log module.
address@hidden, , Syslog, libc, The GNU C Library Reference Manual}, for
-details.
+For background information,
address@hidden, , Syslog, libc, The GNU C Library Reference Manual}.
+
address@hidden
+Synopsis:
@example
logger address@hidden@dots{}] address@hidden
@end example
address@hidden Command line options
address@hidden options}
+
@table @option
@item -4
@itemx --ipv4
@@ -420,7 +443,8 @@ The options are followed by the message which should be
written to the
log. If not specified, and the @option{-f} flag is not provided,
standard input is logged.
-The logger utility exits 0 on success, and >0 if an error occurs.
address@hidden Examples
address@hidden examples}
The following examples illustrate the usage of the @command{logger}
command:
@@ -437,7 +461,7 @@ logger System rebooted
@samp{local0.err}. Mark each message with tag @samp{cmd}:
@example
-command 2>&1 | logger -p local0.notice -t cmd
+command 2>&1 | logger -p local0.err -t cmd
@end example
@item Log each line from file @file{warnings} to channel
@@ -445,8 +469,8 @@ command 2>&1 | logger -p local0.notice -t cmd
using the source IP @samp{10.10.10.1}:
@example
-logger -p daemon.warn -h logger.runasimi.org -S 10.10.10.1 --file
-warnings
+logger -p daemon.warn -h logger.runasimi.org -S 10.10.10.1 \
address@hidden| |}--file warnings
@end example
@end enumerate
@@ -458,16 +482,48 @@ warnings
@c of ping. A user doesn't need to know that we are using TIMEVAL, or
@c how things are padded.
address@hidden uses the ICMP protocol's mandatory @code{ECHO_REQUEST}
-datagram to elicit an ICMP @code{ECHO_RESPONSE} from a host or
-gateway. @code{ECHO_REQUEST} datagrams (@dfn{pings}) have an IP and
-ICMP header, followed by a @dfn{struct timeval} and then an arbitrary
-number of @dfn{pad} bytes used to fill out the packet.
address@hidden uses @acronym{ICMP} datagrams to provoke a response
+from the chosen destination host, mainly intending to probe
+whether it is alive.
+
+The used datagram, of type @code{ECHO_REQUEST}, contains some header
+information and some additional payload, usually a time stamp.
+By a suitable choice of payload, different host or router properties
+are detectable, as the emitted datagram travels to its destination.
+
address@hidden %* Too detailed for end user.
address@hidden uses the @acronym{ICMP} protocol's mandatory
address@hidden datagram to elicit an ICMP @code{ECHO_RESPONSE}
+from a host or gateway.
address@hidden datagrams (@dfn{pings}) have an @acronym{IP} and
+an @acronym{ICMP} header, followed by a @dfn{struct timeval} and then
+an arbitrary number of @dfn{padding} bytes used to fill out the packet.
address@hidden ignore
+
address@hidden
+Synopsis:
@example
ping address@hidden@dots{}] @address@hidden
@end example
address@hidden
+Sending echo requests is the standard use of @command{ping},
+but by far not the only use case.
+
address@hidden
+* Ping options::
+* Fault isolation::
+* Duplicate and damaged packets::
+* Data patterns::
+* TTL details::
+* Further remarks::
address@hidden menu
+
address@hidden Ping options
address@hidden Command line options
address@hidden options}
+
@c Options controlling ICMP request types:
@c --address Send ICMP_ADDRESS packets (root only)
@c --echo Send ICMP_ECHO packets (default)
@@ -475,19 +531,18 @@ ping address@hidden@dots{}] @address@hidden
@c --timestamp Send ICMP_TIMESTAMP packets
@c -t, --type=TYPE Send TYPE packets
-Sending echo requests is the standard use of @command{ping},
-but not the only use case. Selection of packet type is handled
-with these few options:
+Selection of packet type is handled by these first options:
@table @option
@item --address
@opindex --address
Send ICMP_ADDRESS packets, thus requesting the address netmask
-being in use by the targetted host.
+in use by the targetted host.
@item --echo
@opindex --echo
-Send ICMP_ECHO requests (default).
+Send ICMP_ECHO requests.
+This is the default action.
@item --mask
@opindex --mask
@@ -496,12 +551,15 @@ Identical to @option{--address}.
@item --timestamp
@opindex --timestamp
Send ICMP_TIMESTAMP packets, thereby requesting a timed response
-from the targetted host. In successful cases three time values
-will be returned. All are expected to state the number of
-milliseconds since midnight UTC. The first, @samp{icmp_otime},
-contains the original time for sending the request. Then,
address@hidden, is the time of reception by the target, and
-finally, @samp{icmp_ttime}, is the time for transmitting an answer
+from the targetted host.
+
+In successful cases three time values are returned.
+All are expected to state the number of milliseconds since
address@hidden@acronym{UTC}.
+The first of these, @samp{icmp_otime}, contains the original
+time of sending the request.
+Then comes @samp{icmp_rtime}, the time of reception by the target,
+and finally, @samp{icmp_ttime}, the time of transmitting an answer
back to the originator.
@item -t @var{type}
@@ -521,6 +579,7 @@ Send @var{type} packets. Accepted values are
@samp{address},
@c -T, --tos=NUM Set type-of-service to NUM
@c --ttl=NUMBER Set specified time-to-live on packet
address@hidden
The following options are available for all packet types:
@table @option
@@ -528,7 +587,8 @@ The following options are available for all packet types:
@itemx address@hidden
@opindex -c
@opindex --count
-Stop after sending (and receiving) @var{n} ECHO_RESPONSE packets.
+Stop after sending and receiving answers to a total of
address@hidden packets.
@item -d
@itemx -debug
@@ -540,23 +600,23 @@ Set the SO_DEBUG option on the socket being used.
@itemx address@hidden
@opindex -i
@opindex --interval
-Wait @var{n} seconds between sending each packet. The default is to
-wait for one second between each packet. This option is incompatible
-with the @option{-f} option.
+Wait @var{n} seconds until sending next packet.
+The default is to wait for one second between packets.
+This option is incompatible with the option @option{-f}.
@item -n
@itemx --numeric
@opindex -n
@opindex --numeric
-Numeric output only. No attempt will be made to lookup symbolic names
-for host addresses.
+Numeric output only. No attempt will be made to resolve
+symbolic names for host addresses.
@item -r
@itemx --ignore-routing
@opindex -r
@opindex --ignore-routing-log
Bypass the normal routing tables and send directly to a host on an
-attached network. If the host is not on a directly-attached network,
+attached network. If the host is not on a directly attached network,
an error is returned. This option can be used to ping a local host
through an interface that has no route through it (e.g., after the
interface was dropped by @command{routed}).
@@ -565,7 +625,8 @@ interface was dropped by @command{routed}).
@itemx address@hidden
@opindex -T
@opindex --tos
-Set type-of-service, TOS, to NUM on transmitted packets.
+Set type-of-service, @acronym{TOS} field, to @var{num} on
+transmitted packets.
@item address@hidden
@opindex --ttl
@@ -612,25 +673,26 @@ the targeted host, or the intermediary routers for that
matter.
@opindex -f
@opindex --flood
Flood ping. Outputs packets as fast as they come back or one hundred
-times per second, whichever is more. For every ECHO_REQUEST sent a
-period @samp{.} is printed, while for every ECHO_REPLY received a
-backspace is printed. This provides a rapid display of how many
-packets are being dropped. Only the super-user may use this option.
+times per second, whichever is more. For every ECHO_REQUEST packet
+sent, a period @samp{.} is printed, while for every ECHO_REPLY
+received in reply, a backspace is printed.
+This provides a rapid display of how many packets are being dropped.
+Only the super-user may use this option.
This can be very hard on a network and should be used with caution.
@item address@hidden
@opindex --ip-timestamp
-Include IP option Timestamp in transmitted packets. The value
address@hidden is either of @samp{tsonly}, which only records up to nine
-time stamps, and @samp{tsaddr}, which records IP addresses as well
-as time stamps for at most four hosts.
+Include @acronym{IP} option Timestamp in transmitted packets.
+The value @var{flag} is either @samp{tsonly}, which only records up
+to nine time stamps, or @samp{tsaddr}, which records @acronym{IP}
+addresses as well as time stamps, but for at most four hosts.
@item -l @var{n}
@itemx address@hidden
@opindex -l
@opindex --preload
If @var{n} is specified, ping sends that many packets as fast as
-possible before falling into its normal mode of behavior.
+possible before falling into its normal mode of operation.
@item -p @var{pat}
@itemx address@hidden
@@ -652,7 +714,8 @@ Do not print timing for each transmitted packet.
@opindex --route
Record route. Includes the @code{RECORD_ROUTE} field in the
ECHO_REQUEST packet and displays the route buffer on returned packets.
-Note that the IP header is only large enough for nine such routes.
+Note that the @acronym{IP} header is only large enough for nine
+such routes.
Many hosts ignore or discard this option.
@item -s @var{n}
@@ -660,10 +723,11 @@ Many hosts ignore or discard this option.
@opindex -s
@opindex --size
Specifies the number of data bytes to be sent. The default is 56,
-which translates into 64 ICMP data bytes when combined with the 8
-bytes of ICMP header data.
+which translates into address@hidden@acronym{ICMP} data bytes, taking
+the address@hidden of @acronym{ICMP} header data into account.
@end table
address@hidden Fault isolation
@section Using ping for network fault isolation
When using @command{ping} for fault isolation, it should first be run
@@ -684,13 +748,15 @@ unwise to use ping during normal operations or from
automated scripts.
@ignore
@section ICMP Packet Details
-An IP header without options is 20 bytes. An ICMP ECHO_REQUEST packet
-contains an additional 8 bytes worth of ICMP header followed by an
-arbitrary amount of data. When a packetsize is given, this indicated
-the size of this extra piece of data (the default is 56). Thus the
-amount of data received inside of an IP packet of type ICMP ECHO_REPLY
-will always be 8 bytes more than the requested data space (the ICMP
-header).
+An @acronym{IP} header without options consists of 20 bytes.
+An @acronym{ICMP} ECHO_REQUEST packet contains an additional
+8 bytes worth of @acronym{ICMP} header followed by an arbitrary
+amount of data.
+When a packet size is stated, that indicates
+the size of the extra piece of data (the default is 56).
+Thus the amount of data received as an @acronym{IP} packet
+of type @acronym{ICMP} ECHO_REPLY, will always be 8 bytes larger
+than the requested data space (the @acronym{ICMP} header).
If the data space is at least eight bytes large, ping uses the first
eight bytes of this space to include a timestamp which it uses in the
@@ -698,7 +764,8 @@ computation of round trip times. If less than eight bytes
of pad are
specified, no round trip times are given.
@end ignore
address@hidden Duplicate And Damaged Packets
address@hidden Duplicate and damaged packets
address@hidden Duplicate and damaged packets
Ping will report duplicate and damaged packets. Duplicate packets
should never occur, and seem to be caused by inappropriate link-level
@@ -710,7 +777,8 @@ Damaged packets are obviously serious cause for alarm and
often
indicate broken hardware somewhere in the ping packet's path (in the
network or in the hosts).
address@hidden Trying Different Data Patterns
address@hidden Data patterns
address@hidden Trying different data patterns
The (inter)network layer should never treat packets differently
depending on the data contained in the data portion. Unfortunately,
@@ -731,175 +799,271 @@ that takes much longer to transfer than other similar
length files.
You can then examine this file for repeated patterns that you can test
using the @option{-p} option of ping.
address@hidden TTL Details
address@hidden TTL details
address@hidden TTL details
-The TTL, Time To Live value of an IP packet represents the maximum
-number of IP routers that the packet can go through before being
-thrown away. In current practice you can expect each router in the
-Internet to decrement the TTL field by exactly one.
+The @acronym{TTL} field, @dfn{Time To Live}, of an @acronym{IP}
+packet represents the maximum number of @acronym{IP} routers
+that the packet can go through before being discarded.
+In current practice you can expect each router on the
+Internet to decrement the @acronym{TTL} field by exactly one.
-The TCP/IP specification states that the TTL field for TCP packets
-should be set to 60, but many systems use smaller values (4.3 BSD uses
-30, 4.2 used 15).
+The TCP/IP specification states that the @acronym{TTL} field
+of a new @acronym{TCP} packet should be set to 60,
+but many systems use smaller values (4.3BSD uses 30
+and 4.2BSD used 15).
The maximum possible value of this field is 255, and most UNIX systems
-set the TTL field of ICMP (@code{ECHO_REQUEST}) packets to 255. This
-is why you will find you can ping some hosts, but not reach them with
address@hidden or @command{ftp}.
+set the @acronym{TTL} field of @acronym{ICMP} (type @code{ECHO_REQUEST})
+packets to 255. This is why you will find you can ping some hosts,
+but not reach them with @command{telnet} or @command{ftp}.
-In normal operation @command{ping} prints the TTL value from the
-packet it receives. When a remote system receives a ICMP packet, it
-can do one of three things with the TTL field in its response:
+During normal operation, @command{ping} prints the @acronym{TTL} value
+for every packet it receives.
+When a remote system receives an @acronym{ICMP} packet,
+it can do one of three things to the @acronym{TTL} field
+in its response packet:
address@hidden @bullet
address@hidden @bullet
@item
-Not change it; this is what Berkeley UNIX systems did before the
-4.3BSD-Tahoe release. In this case the TTL value in the received
-packet will be 255 minus the number of routers in the round-trip path.
+Not to change it. This is what Berkeley UNIX systems did before the
+4.3BSD-Tahoe release. In this case the @acronym{TTL} value in the
+received packet will be 255 minus the number of routers in the
+round-trip path.
@item
-Set it to 255; this is what current Berkeley UNIX systems do. In this
-case the @code{TTL} value in the received packet will be 255 minus the
+Set it to 255. This is what current Berkeley UNIX systems do. In this
+case the @acronym{TTL} value in the received packet will be 255 minus the
number of routers in the path from the remote system to the pinging
host.
@item
-Set it to some other value. Some machines use the same value for ICMP
-packets that they use for TCP packets, for example either 30 or 60.
-Others may use completely wild values.
+Set it to some other value. Some machines use the same value for
address@hidden packets that they use for @acronym{TCP} packets,
+for example either 30 or 60.
+Others may use completely arbitrary values.
address@hidden table
address@hidden itemize
address@hidden Further remarks
address@hidden Further observations
Many hosts and gateways ignore the @code{RECORD_ROUTE} field, since
-the maximum IP header length is far to small to hold all the routes.
-There's not much that can be done about this.
+the maximum @acronym{IP} header length is far to small to hold all
+the routes.
+There is not much that can be done about this.
Flood pinging is not recommended in general, and flood pinging the
broadcast address should only be done under very controlled
conditions.
+Some BSD variants offer a kernel setting to inhibit all replies
+to ICMP_MASKREQ packets.
+This setting can detected using
+
address@hidden
+$ sysctl net.inet.icmp.maskrepl
+net.inet.icmp.maskrepl: 0
address@hidden example
+
address@hidden
+where a value 1 would be needed for sending a reply, and where 0
+means that any request is simply dropped.
+FreeBSD goes even further by providing a faked netmask:
+
address@hidden
+# sysctl -w net.inet.icmp.maskfake=`expr 255 + 252 \* 256`
+net.inet.icmp.maskfake: 0 -> 64767
address@hidden example
+
address@hidden
+thus setting the netmask to @samp{255.252.0.0} on a little
+endian architecture.
+
@node traceroute invocation
@chapter @command{traceroute}: Trace the route to a host
@cindex traceroute
address@hidden traces the route packets take to a host.
address@hidden prints a trace of the route
address@hidden@tie{}packets are travelling to a remote host.
+
address@hidden
Synopsis:
@example
traceroute address@hidden@dots{}] @var{host}
@end example
address@hidden Command line options
address@hidden options}
+
@table @option
@item -M @var{method}
@itemx address@hidden
@opindex -M
@opindex --type
-Use @var{method} (@samp{icmp} or @samp{udp}) for traceroute
-operations.
+Use @var{method} as carrier packets for traceroute operations.
+Supported choices are @samp{icmp} and @samp{udp}.
@item -p @var{port}
@itemx address@hidden
@opindex -p
@opindex --port
-Use destination @var{port} (default: 33434).
+Set destination port of target to @var{port}.
+The default value is 33434.
@item -q @var{num}
@itemx address@hidden
@opindex -q
@opindex --tries
-Send @var{num} probe packets per hop (default: 3).
+Send a total of @var{num} probe packets per hop, defaulting to 3.
@item --resolve-hostnames
@opindex --resolve-hostnames
-Resolve hostnames.
+Attempt to resolve all addresses as hostnames.
@item -t @var{num}
@itemx address@hidden
@opindex -t
@opindex --tos
-Set type-of-service, TOS, to NUM on transmitted packets.
+Set type-of-service, @acronym{TOS} field, to @var{num} on
+transmitted packets.
@end table
@node whois invocation
address@hidden @command{whois}: Whois user interface
address@hidden @command{whois}: User interface to WHOIS data bases.
@cindex whois
+The functionality of a world wide Internet is dependent on
+stored node information of different kinds.
+Registrars keep much relevant material in WHOIS data bases.
+This utility @command{whois} is able to query those sources
+for general and for particular properties of most domains.
+
+For many domains there are names of suitable data base servers
+hard coded into @command{whois}, ready to query for domain
+relevant information.
+Since servers' names do change from time to time,
+this utility might occasionally need some guidance using
+a suitable command line option.
+
address@hidden
Synopsis:
@example
-whois address@hidden @var{OBJECT}...
+whois address@hidden@dots{}] @address@hidden
@end example
address@hidden Command line options
address@hidden options}
+
@table @option
@item -a
-Search all databases.
address@hidden -a
+Search all data bases.
@item -F
-Fast raw output (implies -r).
address@hidden -F
+Fast and raw output. Implies @option{-r}.
address@hidden -g SOURCE:FIRST-LAST
-Find updates from SOURCE from serial FIRST to LAST.
address@hidden -g @var{source}:@address@hidden
address@hidden -g
+Find updates for an object from provider @var{source},
+starting from the version with serial key @var{first},
+and ending with serial key @var{last}.
address@hidden -h HOST
-Connect to server HOST.
address@hidden -h @var{host}
address@hidden address@hidden
address@hidden -h
address@hidden --server
+Connect to server @var{host}.
@item -H
address@hidden -H
Hide legal disclaimers.
address@hidden -i ATTR[,ATTR]...
address@hidden -i @var{attr}[,@address@hidden
address@hidden -i
Do an inverse lookup for specified attributes.
+Use a comma separated list for multiple attributes.
@item -l
-One level less specific lookup (RPSL only).
address@hidden -l
+One level less specific lookup.
+Applies to @acronym{RPSL} only.
@item -L
-Find all Less specific matches.
address@hidden -L
+Find all less specific matches.
+
address@hidden -m
address@hidden -m
+Find more specific matches, one level deeper.
@item -M
-Find all More specific matches.
address@hidden -M
+Find all more specific matches.
address@hidden -m
-Find first level more specific matches.
address@hidden -p @var{port}
address@hidden -p
+Connect to server port @var{port}.
+
address@hidden -q @{version|address@hidden
address@hidden -q
+Query specified server info.
+Applies to @acronym{RPSL} only.
@item -r
address@hidden -r
Turn off recursive lookups.
address@hidden -p PORT
-Connect to PORT.
-
@item -R
-Force to show local copy of the domain object even if it contains
-referral.
-
address@hidden -S
-Tell server to leave out syntactic sugar.
address@hidden -R
+Force output to show local copy of the domain object,
+even if it contains a referral.
address@hidden -s SOURCE[,SOURCE]...
-Search the database from SOURCE.
address@hidden -s @var{source}[,@address@hidden
address@hidden -s
+Search the data base at @var{source}.
+A comma separated list queries multiple providers.
address@hidden -T TYPE[,TYPE]...
-Only look for objects of TYPE.
address@hidden -S
address@hidden -S
+Tell server to refrain from syntactic sugar.
address@hidden -q [version|sources]
-Query specified server info (RPSL only).
address@hidden -t @var{type}
address@hidden -t
+Request a template for objects of type @var{type}.
+Use the value @samp{all} for a list of possible types.
address@hidden -t TYPE
-Requests template for object of TYPE ('all' for a list).
address@hidden -T @var{type}[,@address@hidden
address@hidden -T
+Search only for objects of type @var{type}.
+A comma separated list allows for multiple types.
address@hidden -v TYPE
-Requests verbose template for object of TYPE.
address@hidden -V
address@hidden --verbose
address@hidden -V
address@hidden --verbose
+Verbosely explain all actions taken.
@item -x
-Exact match only (RPSL only).
address@hidden -x
+Search only for exact matches.
+Applicable only to @acronym{RPSL}.
@end table
+
@node ftp invocation
@chapter @command{ftp}: FTP client
@cindex ftp
address@hidden is the user interface for FTP, File Transfer Protocol.
address@hidden is the user interface to @acronym{FTP},
+the File Transfer Protocol.
The program allows a user to transfer files to and from a remote
-network site. Synopsis:
+network site.
+
address@hidden
+Synopsis:
@example
ftp address@hidden@dots{}] address@hidden address@hidden
@@ -909,7 +1073,34 @@ pftp address@hidden@dots{}] address@hidden address@hidden
@noindent
The alternate name @command{pftp} is starting in passive mode,
but is otherwise identical to @command{ftp}.
-The available command line options are as follows:
+
+The client host with which @command{ftp} is to communicate may be
+specified on the command line.
+If this is done, @command{ftp} will immediately attempt to establish
+a connection to the @acronym{FTP} server running on that host.
+Otherwise, the program will start a command interpreter and will await
+further instructions from the user.
+Commands can either be entered interactively,
+or piped as a batched job read from standard input.
address@hidden is able to distinguish between these two modes
+of operation.
+
address@hidden
+* Ftp options::
+* Ftp commands::
+* Ftp environment::
+* The .netrc file::
+* Aborting a file transfer::
+* File naming conventions::
+* File transfer parameters::
address@hidden menu
+
address@hidden Ftp options
address@hidden Command line options
address@hidden options}
+
+Many command line options have counterparts among the
+commands handled by the internal interpreter.
@table @option
@item -4
@@ -968,14 +1159,14 @@ Turns off interactive prompting during multiple file
transfers.
@opindex --no-login
Restrains @command{ftp} from attempting @dfn{auto-login} upon initial
connection. If auto-login is enabled, @command{ftp} will check the
address@hidden (@pxref{The .netrc File}) file in the user's home
address@hidden (@pxref{The .netrc file}) file in the user's home
directory for an entry describing an account on the remote machine.
If no entry exists, @command{ftp} will prompt for the remote machine
login name (default is the user identity on the local machine), and,
if necessary, prompt for a password and an account with which to
login.
address@hidden address@hidden
address@hidden address@hidden
@opindex --prompt
Print a command-line prompt, even if not on a tty. If @var{prompt} is
supplied, its value is used instead of the default @samp{ftp> }.
@@ -995,24 +1186,18 @@ Start in verbose mode, printing informational messages.
This is default for interactive mode.
@end table
address@hidden
-* Commands::
-* Aborting A File Transfer::
-* File Naming Conventions::
-* File Transfer Parameters::
-* The .netrc File::
address@hidden menu
address@hidden Ftp commands
address@hidden Commands interpreted by @command{ftp}
address@hidden Commands
address@hidden Commands
+When @command{ftp} is awaiting commands from the user,
+a prompt is displayed.
+The default string is @samp{ftp>}, but it can been
+changed in a command line option, perhaps to enhance
+uniqueness for recording a session.
-The client host with which @command{ftp} is to communicate may be
-specified on the command line. If this is done, @command{ftp} will
-immediately attempt to establish a connection to an FTP server on that
-host; otherwise, it will enter its command interpreter and await
-instructions from the user. When @command{ftp} is awaiting commands
-from the user the prompt @samp{ftp>} is provided to the user. The
-following commands are recognized by @command{ftp}:
+Be aware that correct execution of many commands depends upon the
+proper behavior of the remote server.
+The following commands are recognized by @command{ftp} itself, though:
@table @code
@item ! address@hidden address@hidden
@@ -1055,37 +1240,41 @@ Terminate the FTP session with the remote server and
exit
exit.
@item case
-Toggle remote computer file name case mapping during @code{mget}
-commands. When case is on (default is off), remote computer file
-names with all letters in upper case are written in the local
-directory with the letters mapped to lower case.
+Toggle the remote computer's use of letter case mapping during
address@hidden commands.
+When @code{case} is @samp{on},
+a file name at the remote site whose every letter appear
+in upper case, will be renamed in such a way that all letters
+are changed to lower case for a local copy of the same file.
+The default setting is @samp{off},
@item cd @var{remote-directory}
Change the working directory on the remote machine to
-remote-directory.
address@hidden
@item cdup
-Change the remote machine working directory to the parent of the
-current remote machine working directory.
+Change the remote machine's working directory to the parent of the
+current working directory.
@item chmod @var{mode} @var{file-name}
-Change the permission modes of the file @var{file-name} on the remote
+Change the access permission of the file @var{file-name} on the remote
sytem to @var{mode}.
@item close
@itemx disconnect
-Terminate the FTP session with the remote server, and return to the
-command interpreter. Any defined macros are erased.
+Terminate the @acronym{FTP} session with the remote server,
+and return to the command interpreter.
+Any defined macros are erased.
@item cr
Toggle carriage return stripping during ASCII type file retrieval.
Records are denoted by a carriage return/linefeed sequence during
-ASCII type file transfer. When @code{cr} is on (the default),
+ASCII type file transfer. When @code{cr} is @samp{on} (the default),
carriage returns are stripped from this sequence to conform with the
UNIX single linefeed record delimiter. Records on non-UNIX remote
systems may contain single linefeeds; when an ASCII type transfer is
made, these linefeeds may be distinguished from a record delimiter
-only when cr is off.
+only when @code{cr} is @samp{off}.
@item delete @var{remote-file}
Delete the file @var{remote-file} on the remote machine.
@@ -1103,8 +1292,8 @@ Print a listing of the directory contents in the
directory,
prompt the user to verify that the last argument is indeed the target
local file for receiving dir output. If no directory is specified,
the current working directory on the remote machine is used. If no
-local file is specified, or @var{local-file} is @samp{-}, output comes
-to the terminal.
+local file is specified, or @var{local-file} is a dash @samp{-},
+output goes to the terminal.
@item epsv4
Toggle the use of EPSV/EPRT for IPv4 addressing. Default is off.
@@ -1121,24 +1310,27 @@ Retrieve the @var{remote-file} and store it on the
local machine. If
the local file name is not specified, it is given the same name it has
on the remote machine, subject to alteration by the current
@code{case}, @code{ntrans}, and @code{nmap} settings. The current
-settings for type, form, mode, and structure are used while
+settings for @code{type}, @code{form}, @code{mode},
+and @code{structure} are used while
transferring the file.
@item glob
-Toggle filename expansion for @code{mdelete}, @code{mget} and
+Toggle file name expansion for @code{mdelete}, @code{mget}, and
@code{mput}. If globbing is turned off with @code{glob}, the file
-name arguments are taken literally and not expanded. Globbing for
address@hidden is done as in @command{csh}. For @code{mdelete} and
+name arguments are taken literally and are not expanded. Globbing for
address@hidden is done as in @command{csh} syntax.
+For @code{mdelete} and
@code{mget}, each remote file name is expanded separately on the
remote machine and the lists are not merged. Expansion of a directory
name is likely to be different from expansion of the name of an
-ordinary file: the exact result depends on the foreign operating
-system and FTP server, and can be previewed by doing @code{mls
-remote-files -}.
+ordinary file: the exact result depends on the remote operating
+system and on the @acronym{FTP} server, and can be previewed by
+issuing @samp{mls remote-files -}.
Note: @code{mget} and @code{mput} are not meant to transfer entire
-directory subtrees of files. That can be done by transferring a
address@hidden archive of the subtree (in binary mode).
+directory subtrees of files. That can be achieved by transferring
+an already created @command{tar} or @command{cpio} archive of the
+subtree, then making certain that @command{ftp} uses binary mode.
@item hash address@hidden
Toggle hash-sign (@samp{#}) printing for each data block transferred.
@@ -1172,24 +1364,31 @@ specified, the user's home directory is used.
Print a listing of the contents of a directory on the remote machine.
The listing includes any system-dependent information that the server
chooses to include; for example, most UNIX systems will produce output
-from the command @command{ls -l}. If @var{remote}-directory is left
-unspecified, the current working directory is used. If interactive
-prompting is on, @command{ftp} will prompt the user to verify that the
-last argument is indeed the target local file for receiving ls output.
-If no local file is specified, or if @var{local-file} is @samp{-}, the
-output is sent to the terminal.
+like the command @command{ls -l} does.
+Use @code{nlist} for a simple file listing.
+
+If @var{remote-directory} is left unspecified, the current working
+directory is used. With interactive prompting set,
address@hidden will prompt the user to verify that the
+last argument is indeed the intended local file for storing output.
+Should no local file be specified, or if @var{local-file} is a
address@hidden@samp{-}, then output is sent to the terminal.
@item macdef @var{macro-name}
Define a macro called @var{macro-name}, with subsequent lines as the
-macro definition; a null line (consecutive newline characters in a
-file or carriage returns from the terminal) terminates macro input
-mode. There is a limit of 16 macros and 4096 total characters in all
-defined macros. Macros remain defined until a close command is
-executed. The macro processor interprets @samp{$} and @samp{\} as
+macro definition. A null line (consecutive newline characters in a
+file, or carriage returns from the terminal) terminates macro input
+mode. There is a limit of 16 macros and a total of 4096 characters
+in all defined macros.
+Macros remain defined until a close command is executed.
+
+The macro processor interprets @samp{$} and @samp{\} as
special characters. A @samp{$} followed by a number (or numbers) is
replaced by the corresponding argument on the macro invocation command
-line. A @samp{$} followed by an @samp{i} signals that macro processor
-that the executing macro is to be looped. On the first pass @samp{$i}
+line.
+A @samp{$} followed by the letter @samp{i} tells the macro processor
+that the macro is to perform a loop.
+On the first pass @samp{$i}
is replaced by the first argument on the macro invocation command
line, on the second pass it is replaced by the second argument, and so
on. A @samp{\} followed by any character is replaced by that
@@ -1197,19 +1396,20 @@ character. Use the @samp{\} to prevent special
treatment of the
@samp{$}.
@item mdelete address@hidden
-Delete the remote-files on the remote machine.
+Delete all @var{remote-files} on the remote machine.
@item mdir @var{remote-files} @var{local-file}
Like @code{dir}, except multiple remote files may be specified. If
interactive prompting is on, @command{ftp} will prompt the user to
-verify that the last argument is indeed the target local file for
-receiving @code{mdir} output.
+verify that the last argument is indeed the intended local file for
+storing any output from @code{mdir}.
@item mget @var{remote-files}
-Expand the @var{remote-files} on the remote machine and do a get for
-each file name thus produced. Resulting file names will then be
-processed according to @code{case}, @code{ntrans}, and @code{nmap}
-settings. Files are transferred into the local working directory,
+Expand the @var{remote-files} on the remote machine and execute
+a @code{get} for each file name thus produced.
+Resulting file names will then be processed according to
address@hidden, @code{ntrans}, and @code{nmap} settings.
+Files are transferred to the local working directory,
which can be changed with @code{lcd directory}; new local directories
can be created with @code{! mkdir directory}.
@@ -1220,8 +1420,8 @@ Make a directory on the remote machine.
Like @code{nlist}, except multiple remote files may be specified, and
the @var{local-file} must be specified. If interactive prompting is
on, @command{ftp} will prompt the user to verify that the last
-argument is indeed the target local file for receiving @code{mls}
-output.
+argument is the intended local file for storing output.
+A dash @samp{-} is accepted as last argument without check!
@item mode address@hidden
Set the file transfer mode to @var{mode-name}. The default mode is
@@ -1231,70 +1431,78 @@ Set the file transfer mode to @var{mode-name}. The
default mode is
Show the last modification time of the file on the remote machine.
@item mput @var{local-files}
-Expand wild cards in the list of local files given as arguments and do
-a put for each file in the resulting list. Resulting file names will
-then be processed according to @code{ntrans} and @code{nmap} settings.
+Consider the arguments to be local names and expand any wild card.
+Execute a @code{put} for each file in the resulting list.
+The remote file names are then computed by use of
address@hidden and @code{nmap} settings.
@item newer @var{file-name}
Get the file only if the modification time of the remote file is more
-recent that the file on the current system. If the file does not
+recent than the file on the current system. If the file does not
exist on the current system, the remote file is considered newer.
-Otherwise, this command is identical to get.
+In other respects, this command is identical to @code{get}.
@item nlist address@hidden address@hidden
Print a list of the files in a directory on the remote machine. If
@var{remote-directory} is left unspecified, the current working
directory is used. If interactive prompting is on, @command{ftp} will
-prompt the user to verify that the last argument is indeed the target
-local file for receiving nlist output. If no local file is specified,
+prompt the user to verify that the last argument is the intended
+local file for storing output. If no local file is specified,
or if @var{local-file} is @samp{-}, the output is sent to the
terminal.
@item nmap address@hidden @var{outpattern}]
-Set or unset the filename mapping mechanism. If no arguments are
-specified, the filename mapping mechanism is unset. If arguments are
-specified, remote filenames are mapped during @code{mput} commands and
+Set or unset the file name mapping mechanism. If no arguments are
+specified, the file name mapping mechanism is unset.
+Name mapping is applied during @code{mput} and
@code{put} commands issued without a specified remote target filename.
-If arguments are specified, local filenames are mapped during
address@hidden commands and @code{get} commands issued without a
-specified local target filename. This command is useful when
+It as also applied to local file names during
address@hidden and @code{get} commands issued without
+local target file name. This command is useful when
connecting to a non-UNIX remote computer with different file naming
conventions or practices.
The mapping follows the pattern set by @var{inpattern} and
address@hidden The template @var{inpattern} is used for incoming
address@hidden The template @var{inpattern} is used on incoming
filenames (which may have already been processed according to the
address@hidden and case settings). Variable templating is accomplished
address@hidden and @code{case} settings).
+Variable templating is accomplished
by including the sequences @samp{$1}, @samp{$2}, @dots{}, @samp{$9} in
@var{inpattern}. Use @samp{\} to prevent this special treatment of
-the @samp{$} character. All other characters are treated literally,
-and are used to determine the @code{nmap} @var{inpattern} variable
-values.
-
-For example, given inpattern @samp{$1.$2} and the remote file name
address@hidden, @samp{$1} would have the value @samp{mydata}, and
address@hidden would have the value @samp{data}. The @var{outpattern}
-determines the resulting mapped filename. The sequences @samp{$1},
address@hidden, @dots{}., @samp{$9} are replaced by any value resulting
-from the @var{inpattern} template. The sequence @samp{$0} is replaced
-by the original filename. Additionally, the sequence
address@hidden@var{seq1}, @var{seq2}]} is replaced by @var{seq1} if
address@hidden is not a null string; otherwise it is replaced by
address@hidden For example, the command
+the character @kbd{$}. All other characters are treated literally,
+and must be matched in a file name for @var{inpattern}
+to bind substrings to variables.
+
+For example, take a pattern @samp{$1.$2} and a file name
address@hidden
+Then @samp{$1} would have the value @samp{mydata}, and
address@hidden would be @samp{data}.
+
address@hidden determines the final file name.
+The sequences @samp{$1} to @samp{$9} are
+replaced by any values bound to them by @var{inpattern}.
+A special sequence @samp{$0} always contains the original filename.
+In addition, a bracketted sequence @address@hidden,@var{seq2}]}
+expands to @var{seq1} if @var{seq1} contains a non-empty string,
+and expands to @var{seq2} otherwise. For example, the command
@example
nmap $1.$2.$3 [$1,$2].[$2,file]
@end example
-would yield the output filename @file{myfile.data} for input filenames
address@hidden and @file{myfile.data.old}, @file{myfile.file} for
-the input filename @file{myfile}, and @file{myfile.myfile} for the
-input filename @file{.myfile}.
+would yield the output file name @file{myfile.data} for input names
address@hidden and @file{myfile.data.old},
+but produces @file{myfile.file} from the input @file{myfile},
+and @file{myfile.myfile} from @file{.myfile}.
+
+Spaces may be included in @var{outpattern}, but are easily removed:
-Spaces may be included in @var{outpattern}, as in the example:
address@hidden $1 sed "s/ *$//" > $1}. Use the @samp{\} character to
-prevent special treatment of the @samp{$}, @samp{[}, @samp{]}, and
address@hidden,} characters.
address@hidden
+nmap $1 |sed "s/ *$//" > $1
address@hidden smallexample
+
+Use a backslash @kbd{\} to escape the characters
address@hidden, @kbd{[}, @kbd{]}, and @kbd{,}.
@item ntrans address@hidden address@hidden
Set or unset the filename character translation mechanism. If no
@@ -1314,11 +1522,12 @@ character's position in @var{inchars} is longer than
the length of
@var{outchars}, the character is deleted from the file name.
@item open @var{host} address@hidden
-Establish a connection to the specified host FTP server. An optional
-port number may be supplied, in which case, @command{ftp} will attempt
-to contact an FTP server at that port. If the @code{autologin} option
-is on (default), @command{ftp} will also attempt to automatically log
-the user in to the FTP server.
+Establish a connection to the specified @acronym{FTP} server
+at @var{host}. An optional port number may be supplied,
+in which case, @command{ftp} will attempt to contact the server
+at that specific @acronym{TCP} port. If the @code{autologin} option
+is on (is so by default), @command{ftp} will also attempt to
+automatically log the user in to the FTP server.
@item passive
Toggle passive mode. If passive mode is turned on (default is off),
@@ -1348,9 +1557,9 @@ store files. If prompting is turned off (default is on),
any
Execute an @command{ftp} command on a secondary control connection.
This command allows simultaneous connection to two remote FTP servers
for transferring files between the two servers. The first proxy
-command should be an open, to establish the secondary control
-connection. Enter the command @code{proxy ?} to see other ftp
-commands executable on the secondary connection. The following
+command should be @code{open}, to establish the secondary control
+connection. Enter the command @code{proxy ?} to see other
+commands usable for the secondary connection. The following
commands behave differently when prefaced by @code{proxy}: @code{open}
will not define new macros during the auto-login process, @code{close}
will not erase existing macro definitions, @code{get} and @code{mget}
@@ -1358,8 +1567,10 @@ transfer files from the host on the primary control
connection to the
host on the secondary control connection, and @code{put}, @code{mput},
and @code{append} transfer files from the host on the secondary
control connection to the host on the primary control connection.
-Third party file transfers depend upon support of the FTP protocol
address@hidden command by the server on the secondary control connection.
+
+Note that the protocol command @code{PASV} must be understood
+by the server on the secondary control connection for this kind
+of file transfer to succeed.
@item put @var{local-file} address@hidden
@itemx send @var{local-file} address@hidden
@@ -1376,23 +1587,24 @@ Print the name of the current working directory on the
remote machine.
The arguments specified are sent, verbatim, to the remote FTP server.
@item reget @var{remote-file} address@hidden
address@hidden acts like @code{get}, except that if @var{local-file}
-exists and is smaller than @var{remote-file}, @var{local-file} is
address@hidden acts like @code{get}, except that if @var{local-file}
+exists and is smaller than @var{remote-file}, then @var{local-file} is
presumed to be a partially transferred copy of @var{remote-file} and
the transfer is continued from the apparent point of failure. This
command is useful when transferring very large files over networks
that are prone to dropping connections.
address@hidden remotehelp address@hidden
-Request help from the remote FTP server. If a command-name is
-specified it is supplied to the server as well.
address@hidden rhelp address@hidden
+Request help from the remote @acronym{FTP} server.
+If @var{command-name} is specified it is passed to the server as well.
address@hidden remotestatus address@hidden
address@hidden rstatus address@hidden
With no arguments, show status of remote machine. If filename is
specified, show status of @var{file-name} on remote machine.
address@hidden rename address@hidden address@hidden
-Rename the file from on the remote machine, to the file to.
address@hidden rename address@hidden address@hidden
+Rename the file @var{from} on the remote machine as @var{to}.
+Name mapping takes effect without @var{to}.
@item reset
Clear reply queue. This command re-synchronizes command/reply
@@ -1402,17 +1614,18 @@ server.
@item restart @var{marker}
Restart the immediately following @code{get} or @code{put} at the
-indicated marker. On UNIX systems, marker is usually a byte offset
-into the file.
+indicated marker. On UNIX systems, @code{marker} is usually
+a byte offset into the file.
@item rmdir @var{directory-name}
Delete a directory on the remote machine.
@item runique
-Toggle storing of files on the local system with unique filenames. If
-a file already exists with a name equal to the target local filename
-for a @code{get} or @code{mget} command, a @samp{.1} is appended to
-the name. If the resulting name matches another existing file, a
+Toggle the storing of files on the local system with unique filenames.
+If a file already exists with a name equal to the inteded local file
+name for a @code{get} or @code{mget} command,
+then a string @samp{.1} is appended to the name.
+If the resulting name matches another existing file,
@samp{.2} is appended to the original name. If this process continues
up to @samp{.99}, an error message is printed, and the transfer does
not take place. The generated unique filename will be reported. Note
@@ -1442,7 +1655,8 @@ Show the current status of @command{ftp}.
@item struct address@hidden
Set the file transfer structure to @var{struct-name}. By default
address@hidden structure is used.
address@hidden structure is used, which also is the only supported
+value.
@item sunique
Toggle storing of files on remote machine under unique file names.
@@ -1486,16 +1700,17 @@ a file transfer completes, statistics regarding the
efficiency of the
transfer are reported. By default, verbose is on.
@end table
-Command arguments which have embedded spaces may be quoted with quote
address@hidden"} marks.
+Command arguments which have embedded spaces may be inclosed within
+citation characters @kbd{"}.
address@hidden Aborting A File Transfer
address@hidden Aborting A File Transfer
address@hidden Aborting a file transfer
address@hidden Aborting a file transfer
To abort a file transfer, use the terminal interrupt key (usually
address@hidden). Sending transfers will be immediately halted. Receiving
-transfers will be halted by sending a FTP protocol ABOR command to the
-remote server, and discarding any further data received. The speed at
address@hidden). Sending transfers will be immediately halted.
+Receiving transfers will be halted by sending a @acronym{FTP}
+protocol command @code{ABOR} to the remote server,
+discarding any further data received. The speed at
which this is accomplished depends upon the remote server's support
for @code{ABOR} processing. If the remote server does not support the
@code{ABOR} command, an @samp{ftp>} prompt will not appear until the
@@ -1505,12 +1720,13 @@ The terminal interrupt key sequence will be ignored
when @command{ftp}
has completed any local processing and is awaiting a reply from the
remote server. A long delay in this mode may result from the
@code{ABOR} processing described above, or from unexpected behavior by
-the remote server, including violations of the FTP protocol. If the
+the remote server, including violations of the @acronym{FTP} protocol.
+If the
delay results from unexpected remote server behavior, the local
@command{ftp} program must be killed by hand.
address@hidden File Naming Conventions
address@hidden File Naming Conventions
address@hidden File naming conventions
address@hidden File naming conventions
Files specified as arguments to @command{ftp} commands are processed
according to the following rules.
@@ -1521,38 +1737,47 @@ If the file name @samp{-} is specified, standard input
(for reading)
or standard output (for writing) is used.
@item
-If the first character of the file name is @samp{|}, the remainder of
+If the first character of the file name is @kbd{|}, the remainder of
the argument is interpreted as a shell command. @command{ftp} then
forks a shell, using @code{popen} with the argument supplied, and
reads/writes from standard input/output. If the shell command
includes spaces, the argument must be quoted; e.g. @samp{"ls -lt"}.
-A particularly useful example of this mechanism is @samp{dir more}.
+
+A particularly useful example of this mechanism in action, is
+
address@hidden
+ftp> dir . |less
address@hidden smallexample
+
+which allows the user to scroll through a long directory listing.
@item
Failing the above checks, if @dfn{globbing} is enabled, local file
-names are expanded according to the rules used in the @command{csh};
-c.f. the @code{glob} command. If the @command{ftp} command expects a
-single local file (e.g. @code{put}), only the first filename
+names are expanded according to the rules used by @command{csh};
+c.f. the @code{glob} command. If the @command{ftp} command expects a
+single local file (e.g. @code{put}), only the first filename
generated by the globbing operation is used.
@item
-For @code{mget} commands and @code{get} commands with unspecified
-local file names, the local filename is the remote filename, which may
-be altered by a @code{case}, @code{ntrans}, or @code{nmap} setting.
-The resulting filename may then be altered if @code{runique} is on.
+For the commands @code{mget} and @code{get} with unspecified
+local file name, the local file name is set to the remote file name,
+which may be altered by a @code{case}, @code{ntrans}, or @code{nmap}
+settings.
+The resulting file name may then be modified if @code{runique} is set.
@item
-For @code{mput} commands and @code{put} commands with unspecified
-remote file names, the remote filename is the local filename, which
-may be altered by a @code{ntrans} or @code{nmap} setting. The
-resulting filename may then be altered by the remote server if
address@hidden is on.
+For the commands @code{mput} and @code{put} with unspecified
+remote file name, the remote file name is copied from the local
+file name, which may be altered by a @code{ntrans} or @code{nmap}
+settings.
+The resulting file name may also be modified by the remote server if
address@hidden is set.
@end enumerate
address@hidden File Transfer Parameters
address@hidden File Transfer Parameters
address@hidden File transfer parameters
address@hidden File transfer parameters
-The FTP specification specifies many parameters which may affect a
+The @acronym{FTP} specification includes many parameters which may affect a
file transfer. The type may be one of @samp{ascii}, @samp{image}
(binary), @samp{ebcdic}, and @samp{local} byte size (for PDP-10's and
PDP-20's mostly). @command{ftp} supports the @samp{ascii} and
@@ -1562,8 +1787,15 @@ mode transfers.
@command{ftp} supports only the default values for the remaining file
transfer parameters: @code{mode}, @code{form}, and @code{struct}.
address@hidden The .netrc File
address@hidden The @file{.netrc} File
+An error in the treatment of carriage returns in the 4.2BSD ascii-mode
+transfer code has been corrected by the present implementation.
+This correction may result in corrupt transfers of binary files
+to and from 4.2BSD servers, when done using the ascii type.
+Avoid this problem by using the binary image type.
+
address@hidden The .netrc file
address@hidden The @file{.netrc} file
address@hidden .netrc
The @file{.netrc} file contains login and initialization information
used by the auto-login process. It resides in the user's home
@@ -1619,24 +1851,19 @@ encountered. If a macro named init is defined, it is
automatically
executed as the last step in the auto-login process.
@end table
address@hidden utilizes the following environment variables.
address@hidden Ftp environment
address@hidden Environment variables in use
+
address@hidden accesses the following environment variables.
@table @env
@item HOME
-For default location of a @file{.netrc} file, if one exists.
+Used for locating a @file{.netrc} file, if one exists.
@item SHELL
-For default shell.
+For determining the default shell interpreter.
@end table
-Correct execution of many commands depends upon proper behavior by the
-remote server.
-
-An error in the treatment of carriage returns in the 4.2BSD ascii-mode
-transfer code has been corrected. This correction may result in
-incorrect transfers of binary files to and from 4.2BSD servers using
-the ascii type. Avoid this problem by using the binary image type.
-
@node tftp invocation
@chapter @command{tftp}: TFTP client
@cindex tftp
@@ -1647,6 +1874,9 @@ from a remote machine. The remote host may be specified
on the
command line, in which case @command{tftp} uses host as the default
host for future transfers.
address@hidden
+Synopsis:
+
@example
tftp address@hidden@dots{} @var{host}
@end example
@@ -1762,7 +1992,8 @@ For details, @xref{rcmd, , rcmd, libc, The GNU C Library
Reference Manual}.
If no command is specified for @command{rsh} ar argument following the
host name, then you will be logged in on the remote host using
@command{rlogin}.
address@hidden Invoking
address@hidden Command line options
address@hidden options}
The options are as follows :
@@ -1903,7 +2134,8 @@ named @var{hostname}.
password. The prerequisite is a suitable specification in @file{~/.rhosts}.
For details, @xref{rcmd, , rcmd, libc, The GNU C Library Reference Manual}.
address@hidden Invoking
address@hidden Command line options
address@hidden options}
The options are as follows :
@@ -2068,11 +2300,17 @@ argument is either a remote file name of the form
@samp{rname@@rhost:path}, or a local file name (containing no @samp{:}
characters, or a @samp{/} before any @samp{:}s).
address@hidden
+Synopsis:
+
@example
rcp address@hidden@dots{} @var{old-file} @var{new-file}
rcp address@hidden@dots{} @address@hidden @var{directory}
@end example
address@hidden Command line options
address@hidden options}
+
@table @option
@item -4
@itemx --ipv4
@@ -2162,12 +2400,16 @@ version of @command{rcp}.
@command{rexec} is a program that executes a program on another host.
address@hidden
+Synopsis:
+
@example
rexec address@hidden address@hidden address@hidden \
- [OPTION] @var{command}
address@hidden| |}[OPTION] @var{command}
@end example
-The command line arguments are as follows:
address@hidden Command line options
address@hidden options}
@table @option
@item -4
@@ -2295,12 +2537,18 @@ previous state.
@cindex telnet
Login to a remote system HOST, optionally using a (non-standard)
-service port PORT:
+service port PORT.
+
address@hidden
+Synpsis:
@example
telnet address@hidden address@hidden address@hidden
@end example
address@hidden Command line options
address@hidden options}
+
@table @option
@item -4
@itemx --ipv4
@@ -2404,7 +2652,7 @@ is to be disabled. Standard choices are @samp{null},
@end table
@node inetd invocation
address@hidden @command{inetd}: Interner super-server
address@hidden @command{inetd}: Internet super-server
@cindex inetd
@command{inetd} program should be run at boot time by /etc/rc. It
@@ -3279,6 +3527,7 @@ Displayed and access refused.
@chapter @command{tftpd}: TFTP server
@cindex tftpd
address@hidden
Synopsis:
@example
-----------------------------------------------------------------------
Summary of changes:
TODO | 4 -
doc/inetutils.texi | 851 +++++++++++++++++++++++++++++++++-------------------
2 files changed, 550 insertions(+), 305 deletions(-)
hooks/post-receive
--
GNU Inetutils
| [Prev in Thread] |
Current Thread |
[Next in Thread] |
- [SCM] GNU Inetutils branch, master, updated. inetutils-1_9_1-224-gf88d586,
Mats Erik Andersson <=