config-patches
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Issue in Config.guess - in system powerpc64le


From: Kumar, Awanish
Subject: RE: Issue in Config.guess - in system powerpc64le
Date: Thu, 1 Feb 2018 10:20:51 +0000

Hi ,

Yes you are right the config.guess script inside RPostgreSQL_0.6-2.tar.gz has 
time stamp of 2011-10-19. But changing this is also giving error " ERROR: 
'configure' exists but is not executable -- see the 'R Installation and 
Administration Manual' ".

Just to note: The same package with same config.guess is getting installed on 
other system.

The problems: To me it looks like hostinfo, /bin/universe  and other info are 
not getting any value during installation, so giving error. Below is error msg. 
see line between
config.guess timestamp = 2011-10-19

uname -m = ppc64le
uname -r = 3.10.0-693.11.6.el7.ppc64le
uname -s = Linux
uname -v = #1 SMP Thu Dec 28 14:26:44 EST 2017

/usr/bin/uname -p = ppc64le
/bin/uname -X     =
=================THIS INFO IS NOT GETTING VALUE ===============================
hostinfo               =
/bin/universe          =
/usr/bin/arch -k       =
/bin/arch              = ppc64le
/usr/bin/oslevel       =
/usr/convex/getsysinfo =
==================================================
UNAME_MACHINE = ppc64le
UNAME_RELEASE = 3.10.0-693.11.6.el7.ppc64le
UNAME_SYSTEM  = Linux
UNAME_VERSION = #1 SMP Thu Dec 28 14:26:44 EST 2017
configure: error: cannot guess build type; you must specify one
ERROR: configuration failed for package 'RPostgreSQL'


Thanks
Awanish
9953328299

-----Original Message-----
From: Ben Elliston [mailto:address@hidden
Sent: Wednesday, January 31, 2018 1:38 AM
To: Kumar, Awanish <address@hidden>
Cc: Earnie <address@hidden>; address@hidden; Vijayakumar, Vivek Shrinivasan 
<address@hidden>
Subject: Re: Issue in Config.guess - in system powerpc64le

On Tue, Jan 30, 2018 at 01:17:41PM +0000, Kumar, Awanish wrote:

> Or from shell
> $R CMD INSTALL RPostgreSQL_0.6-2.tar.gz ##it means installing from
> binary file.

Are you updating the config.guess script inside the tar file? If not, every 
time you unpack the distribution tar file, you will get the old version of 
config.guess.

Ben
The information contained in this message is proprietary and/or confidential. 
If you are not the intended recipient, please: (i) delete the message and all 
copies; (ii) do not disclose, distribute or use the message in any manner; and 
(iii) notify the sender immediately. In addition, please be aware that any 
message addressed to our domain is subject to archiving and review by persons 
other than the intended recipient. Thank you.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]