[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Cvs-cvs] ccvs/doc/i18n/pt_BR cvs.texinfo
From: |
Fred Ulisses Maranhão |
Subject: |
[Cvs-cvs] ccvs/doc/i18n/pt_BR cvs.texinfo |
Date: |
Sun, 15 Jan 2006 06:39:35 +0000 |
CVSROOT: /sources/cvs
Module name: ccvs
Branch:
Changes by: Fred Ulisses Maranhão <address@hidden> 06/01/15 06:39:35
Modified files:
doc/i18n/pt_BR : cvs.texinfo
Log message:
translated section "common options"
CVSWeb URLs:
http://cvs.savannah.gnu.org/viewcvs/cvs/ccvs/doc/i18n/pt_BR/cvs.texinfo.diff?tr1=1.39&tr2=1.40&r1=text&r2=text
Patches:
Index: ccvs/doc/i18n/pt_BR/cvs.texinfo
diff -u ccvs/doc/i18n/pt_BR/cvs.texinfo:1.39
ccvs/doc/i18n/pt_BR/cvs.texinfo:1.40
--- ccvs/doc/i18n/pt_BR/cvs.texinfo:1.39 Sun Oct 9 03:45:26 2005
+++ ccvs/doc/i18n/pt_BR/cvs.texinfo Sun Jan 15 06:39:34 2006
@@ -5050,9 +5050,9 @@
@c <en> Here is a complete description of the server's
@c <en>behavior in deciding whether to grant read-only or
@c <en>read-write access:
- Here is a complete description of the server's
-behavior in deciding whether to grant read-only or
-read-write access:
+ Aqui está uma descrição completa do
+comportamento do servidor em decidir se dá acesso
+somente-leitura ou leitura-escrita:
@c <en> If @file{readers} exists, and this user is
@c <en>listed in it, then she gets read-only access. Or if
@@ -5060,23 +5060,23 @@
@c <en>it, then she also gets read-only access (this is true
@c <en>even if @file{readers} exists but she is not listed
@c <en>there). Otherwise, she gets full read-write access.
- If @file{readers} exists, and this user is
-listed in it, then she gets read-only access. Or if
address@hidden exists, and this user is NOT listed in
-it, then she also gets read-only access (this is true
-even if @file{readers} exists but she is not listed
-there). Otherwise, she gets full read-write access.
+ Se @file{readers} existe, e a usuária está
+nele, então ela obtem acesso somente-leitura. Ou se
address@hidden existe, e esta usuária NÃO está listada
+nele, então ela também obtem acesso somente-leitura
+(isto é verdade mesmo se @file{readers} existe mas ela
+não está listada nele). Caso contrário, ela obtem
+acesso leitura-escrita total.
@c <en> Of course there is a conflict if the user is
@c <en>listed in both files. This is resolved in the more
@c <en>conservative way, it being better to protect the
@c <en>repository too much than too little: such a user gets
@c <en>read-only access.
- Of course there is a conflict if the user is
-listed in both files. This is resolved in the more
-conservative way, it being better to protect the
-repository too much than too little: such a user gets
-read-only access.
+ Claro que há um conflito se o usuário estiver
+nos dois arquivos. O conflito é resolvido da forma
+mais conservativa, sendo melhor proteger o repositório
+a mais do que a menos: a usuária obtem acesso somente-leitura.
@c <en>@node Server temporary directory
@node Diretório temporário do servidor
@@ -12793,7 +12793,7 @@
@c <en>take the above categorization too seriously. Look at
@c <en>the documentation instead.
Infelizmente, existe alguma confusão entre
address@hidden e @code{command_options}. @samp{-l},
address@hidden e @code{opções_de_comando}. @samp{-l},
quando passado como @code{cvs_option}, afeta apenas
alguns dos comandos. Quando é passado como um
@code{command_option} tem um significado diferente, e é
@@ -12977,7 +12977,7 @@
@cindex Left-hand options
As @samp{cvs_options} disponíveis (as que são dadas à
-esquerda do @samp{cvs_command}) são:
+esquerda do @samp{comando_cvs}) são:
@table @code
@c <en>@item address@hidden
@@ -13102,7 +13102,7 @@
@c <en>(but do not actually execute the command). If you don't specify
@c <en>a command name, @samp{cvs -H} displays overall help for
@c <en>@sc{cvs}, including a list of other help options.
-Mostra informações sobre o uso de determinado @samp{cvs_command}
+Mostra informações sobre o uso de determinado @samp{comando_cvs}
(mas não executa o comando na verdade). Se você não
especificar o nome do comando, o @samp{cvs -H} vai
mostrar uma ajuda geral para o @sc{cvs}, inclusive uma
@@ -13115,7 +13115,7 @@
@item -l
@c <en>Do not log the @samp{cvs_command} in the command history (but execute it
@c <en>anyway). @xref{history}, for information on command history.
-Não registra o @samp{cvs_command} no histórico de
+Não registra o @samp{comando_cvs} no histórico de
comandos (mas executa o comando). @xref{history}, para
informações sobre o histórico de comandos.
@@ -13145,7 +13145,7 @@
@c <en>@samp{cvs_command}, but only to issue reports; do not remove,
@c <en>update, or merge any existing files, or create any new files.
Não mude nenhum arquivo. tente executar o
address@hidden, mas apenas para mostrar a saída;
address@hidden, mas apenas para mostrar a saída;
não remove, atualiza, ou mescla qualquer arquivo
existente, ou cria novos arquivos.
@@ -13278,46 +13278,64 @@
@c <en>@cindex Right-hand options
@cindex Right-hand options
-This section describes the @samp{command_options} that
-are available across several @sc{cvs} commands. These
-options are always given to the right of
address@hidden Not all
-commands support all of these options; each option is
-only supported for commands where it makes sense.
-However, when a command has one of these options you
-can almost always count on the same behavior of the
-option as in other commands. (Other command options,
-which are listed with the individual commands, may have
-different behavior from one @sc{cvs} command to the other).
-
address@hidden: the @samp{history} command is an exception; it supports
-many options that conflict even with these standard options.}
+Esta seção descreve as @samp{opções_de_comando} que
+estão disponíveis em vários comandos do @sc{cvs}.
+Estas opções são sempre fornecidas à esquerda do
address@hidden Nem todos os comandos
+suportam todas estas opções; cada uma das opções é
+suportada apenas pelos comandos nos quais ela faz
+sentido. Entretanto, quando um comando tem uma destas
+opções você pode quase sempre esperar o mesmo
+comportamento da opção em outros comandos. (Outras
+opções de comando, que são listadas com os comandos
+individualmente, podem ter comportamento diferente
+entre um comando do @sc{cvs} e outro).
+
address@hidden: o comando @samp{history} é uma exceção;
+ele suporta muitas opções que conflitam até mesmo com
+essas opções padrão.}
address@hidden <en>@table @code
@table @code
address@hidden <en>@cindex Dates
@cindex Dates
address@hidden <en>@cindex Time
@cindex Time
address@hidden Specifying dates
address@hidden <en>@cindex Specifying dates
address@hidden Especificando datas
address@hidden <en>@item -D @var{date_spec}
@item -D @var{date_spec}
-Use the most recent revision no later than @var{date_spec}.
address@hidden is a single argument, a date description
-specifying a date in the past.
address@hidden <en>Use the most recent revision no later than @var{date_spec}.
address@hidden <en>@var{date_spec} is a single argument, a date description
address@hidden <en>specifying a date in the past.
+Usa a revisão mais recente que não seja mais recente
+que @var{date_spec}. @var{date_spec} é um único
+argumento, uma descrição de data especificando uma data
+passada.
@c <en>The specification is @dfn{sticky} when you use it to make a
@c <en>private copy of a source file; that is, when you get a working
@c <en>file using @samp{-D}, @sc{cvs} records the date you specified, so that
@c <en>further updates in the same directory will use the same date
@c <en>(for more information on sticky tags/dates, @pxref{Sticky tags}).
-The specification is @dfn{sticky} when you use it to make a
-private copy of a source file; that is, when you get a working
-file using @samp{-D}, @sc{cvs} records the date you specified, so that
-further updates in the same directory will use the same date
-(for more information on sticky tags/dates, @pxref{Etiquetas adesivas}).
-
address@hidden is available with the @code{annotate}, @code{checkout},
+A especificação é @dfn{adesiva} qunado você a usa para
+criar uma ???private copy??? de um arquivo fonte; ou
+seja, quando você pega um ???working file??? usando
address@hidden, o @sc{cvs} guarda a data que você
+especificou, de forma que próximas atualizações no
+mesmo diretório vão usar a mesma dara (para mais
+informações sobre datas/etiquetas adesivas, @pxref{Etiquetas adesivas}).
+
address@hidden <en>@samp{-D} is available with the @code{annotate},
@code{checkout},
address@hidden <en>@code{diff}, @code{export}, @code{history},
address@hidden <en>@code{rdiff}, @code{rtag}, @code{tag}, and @code{update}
commands.
address@hidden <en>(The @code{history} command uses this option in a
address@hidden <en>slightly different way; @pxref{history options}).
address@hidden está disponível com os comandos @code{annotate}, @code{checkout},
@code{diff}, @code{export}, @code{history},
address@hidden, @code{rtag}, @code{tag}, and @code{update} commands.
-(The @code{history} command uses this option in a
-slightly different way; @pxref{history options}).
address@hidden, @code{rtag}, @code{tag} e
address@hidden (O comando @code{history} usa esta opção
+de uma forma um pouco diferente; @pxref{history options}).
@c What other formats should we accept? I don't want
@c to start accepting a whole mess of non-standard
@@ -13382,12 +13400,19 @@
@c Headers Issue 4, Version 2 (September 1994), in the
@c entry for getdate() on page 231
address@hidden <en>@cindex Timezone, in input
@cindex Timezone, in input
address@hidden <en>@cindex Zone, time, in input
@cindex Zone, time, in input
-A wide variety of date formats are supported by
address@hidden The most standard ones are ISO8601 (from the
-International Standards Organization) and the Internet
-e-mail standard (specified in RFC822 as amended by
address@hidden <en>A wide variety of date formats are supported by
address@hidden <en>@sc{cvs}. The most standard ones are ISO8601 (from the
address@hidden <en>International Standards Organization) and the Internet
address@hidden <en>e-mail standard (specified in RFC822 as amended by
address@hidden <en>RFC1123).
+Uma ampla variedade de formatos de data é suportada pelo
address@hidden As mais comuns são a ISO8601 (da
+International Standards Organization) e o Internet
+e-mail standard (especificado na RFC822 ???as amended by???
RFC1123).
@c Probably should be doing more to spell out just what
@@ -13403,8 +13428,10 @@
@c hour when daylight savings time goes into or out of
@c effect. Pretty obscure, so I'm not at all sure we
@c should be documenting the behavior in that case.
-ISO8601 dates have many variants but a few examples
-are:
address@hidden <en>ISO8601 dates have many variants but a few examples
address@hidden <en>are:
+Datas ISO8601 tem muitas variantes, mas alguns exemplos
+são:
@example
1972-09-24
@@ -13416,9 +13443,12 @@
@c bizarre and it has lots of gratuitous multiple ways
@c to specify the same thing.
-There are a lot more ISO8601 date formats, and @sc{cvs}
-accepts many of them, but you probably don't want to
-hear the @emph{whole} long story :-).
address@hidden <en>There are a lot more ISO8601 date formats, and @sc{cvs}
address@hidden <en>accepts many of them, but you probably don't want to
address@hidden <en>hear the @emph{whole} long story :-).
+Existem muitos outros formatos de data ISO8601, e o
address@hidden aceita muitos deles, mas você provavelmente
+não vai querer ouvir @emph{toda} esta longa história :-).
@c Citing a URL here is kind of problematic given how
@c much they change and people who have old versions of
@@ -13429,9 +13459,12 @@
@c Citing some other ISO8601 source is probably even
@c worse :-).
-In addition to the dates allowed in Internet e-mail
-itself, @sc{cvs} also allows some of the fields to be
-omitted. For example:
address@hidden <en>In addition to the dates allowed in Internet e-mail
address@hidden <en>itself, @sc{cvs} also allows some of the fields to be
address@hidden <en>omitted. For example:
+Além das datas permitidas nos próprios ???Internet e-mail???
+, o @sc{cvs} também permite que alguns campos sejam
+omitidos. Por exemplo:
@c FIXME: Need to figure out better, and document,
@c what we want to allow the user to omit.
@c NOTE: "omit" does not imply "reorder".
@@ -13443,15 +13476,23 @@
24 Sep
@end example
-The date is interpreted as being in the
-local timezone, unless a specific timezone is
-specified.
-
-These two date formats are preferred. However,
address@hidden currently accepts a wide variety of other date
-formats. They are intentionally not documented here in
-any detail, and future versions of @sc{cvs} might not
-accept all of them.
address@hidden <en>The date is interpreted as being in the
address@hidden <en>local timezone, unless a specific timezone is
address@hidden <en>specified.
+A data é interpretada como estando no fuso horário
+local, a não ser que o fuso horário seja especificado.
+
address@hidden <en>These two date formats are preferred. However,
address@hidden <en>@sc{cvs} currently accepts a wide variety of other date
address@hidden <en>formats. They are intentionally not documented here in
address@hidden <en>any detail, and future versions of @sc{cvs} might not
address@hidden <en>accept all of them.
+Estes dois formatos de data são preferenciais.
+Entretanto, o @sc{cvs} atualmente aceita uma ampla
+variedade de outros formatos de data. Eles não são
+documentados aqui em nenhum detalhe, de forma
+intencional, e versões futuras de @sc{cvs} podem não
+aceitar todos eles.
@c We should document and testsuite "now" and
@c "yesterday". "now" is mentioned in the FAQ and
@c "yesterday" is mentioned in this document (and the
@@ -13465,49 +13506,76 @@
@c misunderstandings, and/or formats people never/rarely
@c use to specify dates)?
-One such format is
address@hidden@var{month}/@var{day}/@var{year}}. This may
-confuse people who are accustomed to having the month
-and day in the other order; @samp{1/4/96} is January 4,
-not April 1.
-
-Remember to quote the argument to the @samp{-D}
-flag so that your shell doesn't interpret spaces as
-argument separators. A command using the @samp{-D}
-flag can look like this:
address@hidden <en>One such format is
address@hidden <en>@address@hidden/@var{day}/@var{year}}. This may
address@hidden <en>confuse people who are accustomed to having the month
address@hidden <en>and day in the other order; @samp{1/4/96} is January 4,
address@hidden <en>not April 1.
+Um destes formatos é
address@hidden@var{mês}/@var{dia}/@var{ano}}. Isto pode
+confundir as pessoas que estão acostumadas a ter o mês
+e o dia na outra ordem; @samp{1/4/96} é janeiro 4,
+não abril 1.
+
address@hidden <en>Remember to quote the argument to the @samp{-D}
address@hidden <en>flag so that your shell doesn't interpret spaces as
address@hidden <en>argument separators. A command using the @samp{-D}
address@hidden <en>flag can look like this:
+Lembre-se de por aspas no argumento da opção @samp{-D}
+para que o seu shell não interprete espaços como
+separadores de comandos. Um comando usando a opção
address@hidden deve se parecer com isto:
@example
$ cvs diff -D "1 hour ago" cvs.texinfo
@end example
address@hidden <en>@cindex Forcing a tag match
@cindex Forcing a tag match
address@hidden <en>@item -f
@item -f
-When you specify a particular date or tag to @sc{cvs} commands, they
-normally ignore files that do not contain the tag (or did not
-exist prior to the date) that you specified. Use the @samp{-f} option
-if you want files retrieved even when there is no match for the
-tag or date. (The most recent revision of the file
-will be used).
-
-Note that even with @samp{-f}, a tag that you specify
-must exist (that is, in some file, not necessary in
-every file). This is so that @sc{cvs} will continue to
-give an error if you mistype a tag name.
address@hidden <en>When you specify a particular date or tag to @sc{cvs}
commands, they
address@hidden <en>normally ignore files that do not contain the tag (or did not
address@hidden <en>exist prior to the date) that you specified. Use the
@samp{-f} option
address@hidden <en>if you want files retrieved even when there is no match for
the
address@hidden <en>tag or date. (The most recent revision of the file
address@hidden <en>will be used).
+Quando você especifica uma data ou etiqueta em
+particular para os comandos do @sc{cvs}, eles
+normalmente ignoram os arquivos que não contem a
+etiqueta (ou não existem até o momento da data) que
+você especificou. Use a opção @samp{-f} se você quer
+que os arquivos sejam recuperados mesmo se não tem uma
+etiqueta ou data que combine. (A versão mais nova do
+arquivo vai ser usada).
+
address@hidden <en>Note that even with @samp{-f}, a tag that you specify
address@hidden <en>must exist (that is, in some file, not necessary in
address@hidden <en>every file). This is so that @sc{cvs} will continue to
address@hidden <en>give an error if you mistype a tag name.
+Observe que mesmo com o @samp{-f}, a etiqueta que voc
+especificar deve existir (ou seja, em algum arquivo,
+não necessariamente em todos). Isto é assim para que o
address@hidden continue dando uma mensagem de erro enquanto
+você estiver digitando a etiqueta errado.
@need 800
address@hidden is available with these commands:
address@hidden <en>@samp{-f} is available with these commands:
address@hidden <en>@code{annotate}, @code{checkout}, @code{export},
address@hidden <en>@code{rdiff}, @code{rtag}, and @code{update}.
+O @samp{-f} está disponível com estes comandos:
@code{annotate}, @code{checkout}, @code{export},
address@hidden, @code{rtag}, and @code{update}.
address@hidden, @code{rtag} e @code{update}.
@c <en>@strong{WARNING: The @code{commit} and @code{remove}
@c <en>commands also have a
@c <en>@samp{-f} option, but it has a different behavior for
@c <en>those commands. See @ref{commit options}, and
@c <en>@ref{Removing files}.}
address@hidden: The @code{commit} and @code{remove}
-commands also have a
address@hidden option, but it has a different behavior for
-those commands. See @ref{commit options}, and
address@hidden: Os comandos @code{commit} e
address@hidden também têm uma opção
address@hidden, mas esta tem um comportamento diferente
+nestes comandos. veja em address@hidden options}???, e
@ref{Removendo arquivos}.}
@c <en>@item -k @var{kflag}
@@ -13521,110 +13589,138 @@
@c <en>@sc{cvs} associates your selected @var{kflag} with any files
@c <en>it operates on, and continues to use that @var{kflag} with future
@c <en>commands on the same files until you specify otherwise.
-Override the default processing of RCS keywords other than
address@hidden @xref{Substituição de palavra-chave}, for the meaning of
address@hidden Used with the @code{checkout} and @code{update}
-commands, your @var{kflag} specification is
address@hidden; that is, when you use this option
-with a @code{checkout} or @code{update} command,
address@hidden associates your selected @var{kflag} with any files
-it operates on, and continues to use that @var{kflag} with future
-commands on the same files until you specify otherwise.
+Sobrepõe o processamento padrão de palavras-cahve do
+RCS que não sejam o @samp{-kb}. @xref{Substituição de
+palavra-chave}, pelo significado em @var{kflag}. Usado
+com os comandos @code{checkout} e @code{update}, o que
+você especifica para o @var{kflag} torna-se
address@hidden; ou seja, quando você usa esta opção com
+o comando @code{checkout} ou o comando @code{update}, o
address@hidden associa o @var{kflag} que você selecionou com
+quaisquer arquivos nos quais ele operou, e continua a
+usar este @var{kflag} com comandos futuros em tais
+arquivos até que você especifique outra coisa.
@c <en>The @samp{-k} option is available with the @code{add},
@c <en>@code{checkout}, @code{diff}, @code{export}, @code{import} and
@c <en>@code{update} commands.
-The @samp{-k} option is available with the @code{add},
address@hidden, @code{diff}, @code{export}, @code{import} and
address@hidden commands.
+A opção @samp{-k} esta disponível com os comandos @code{add},
address@hidden, @code{diff}, @code{export}, @code{import} e
address@hidden
@c <en>@strong{WARNING: Prior to CVS version 1.12.2, the @samp{-k} flag
@c <en>overrode the @samp{-kb} indication for a binary file. This could
@c <en>sometimes corrupt binary files. @xref{Merging and keywords}, for
@c <en>more.}
address@hidden: Prior to CVS version 1.12.2, the @samp{-k} flag
-overrode the @samp{-kb} indication for a binary file. This could
-sometimes corrupt binary files. @xref{Mesclagem e palavras-chave}, for
-more.}
address@hidden: Antes da versão 1.12.2 do CVS, a opção
address@hidden se sobrepunha à indicação @samp{-kb} para um
+arquivo binário. Isto algumas vezes corrompia os
+arquivos binários. @xref{Mesclagem e palavras-chave},
+para mais.}
@c <en>@item -l
@item -l
@c <en>Local; run only in current working directory, rather than
@c <en>recursing through subdirectories.
-Local; run only in current working directory, rather than
-recursing through subdirectories.
+Local; Roda apenas no diretório atual, ao invés de
+descer recursivamente nos subdiretórios.
@c <en>Available with the following commands: @code{annotate}, @code{checkout},
@c <en>@code{commit}, @code{diff}, @code{edit}, @code{editors}, @code{export},
@c <en>@code{log}, @code{rdiff}, @code{remove}, @code{rtag},
@c <en>@code{status}, @code{tag}, @code{unedit}, @code{update}, @code{watch},
@c <en>and @code{watchers}.
-Available with the following commands: @code{annotate}, @code{checkout},
+Disponível com os seguintes comandos: @code{annotate}, @code{checkout},
@code{commit}, @code{diff}, @code{edit}, @code{editors}, @code{export},
@code{log}, @code{rdiff}, @code{remove}, @code{rtag},
address@hidden, @code{tag}, @code{unedit}, @code{update}, @code{watch},
-and @code{watchers}.
address@hidden, @code{tag}, @code{unedit},
address@hidden, @code{watch} e @code{watchers}.
@c <en>@cindex Editor, avoiding invocation of
address@hidden Editor, avoiding invocation of
address@hidden Editor, evitando chamar o
@c <en>@cindex Avoiding editor invocation
address@hidden Avoiding editor invocation
address@hidden Evitando chamar o editor
@c <en>@item -m @var{message}
address@hidden -m @var{message}
address@hidden -m @var{mensagem}
@c <en>Use @var{message} as log information, instead of
@c <en>invoking an editor.
-Use @var{message} as log information, instead of
-invoking an editor.
+Use @var{mensagem} como informação do registro (log),
+ao invés de chamar um editor.
@c <en>Available with the following commands: @code{add},
@c <en>@code{commit} and @code{import}.
-Available with the following commands: @code{add},
address@hidden and @code{import}.
+Disponível com os seguintes comandos: @code{add},
address@hidden e @code{import}.
@c <en>@item -n
@item -n
@c <en>Do not run any tag program. (A program can be
@c <en>specified to run in the modules
@c <en>database (@pxref{modules}); this option bypasses it).
-Do not run any tag program. (A program can be
-specified to run in the modules
-database (@pxref{modules}); this option bypasses it).
+Não roda qualquer ???tag program???. (Um programa pode
+ser especificado para rodar em ???the modules
+database??? (@pxref{modules}); eta opção contorna isto).
@c <en>@strong{Note: this is not the same as the @samp{cvs -n}
@c <en>program option, which you can specify to the left of a cvs command!}
address@hidden: this is not the same as the @samp{cvs -n}
-program option, which you can specify to the left of a cvs command!}
-
-Available with the @code{checkout}, @code{commit}, @code{export},
-and @code{rtag} commands.
address@hidden: isto não é igual à opção de
+programa @samp{cvs -n}, que você especifica à esquerda
+de um ???cvs command???!}
+
address@hidden <en>Available with the @code{checkout}, @code{commit},
@code{export},
address@hidden <en>and @code{rtag} commands.
+Disponível com os comandos @code{checkout},
address@hidden, @code{export} e @code{rtag}.
address@hidden <en>@item -P
@item -P
@c <en>Prune empty directories. See @ref{Removing directories}.
-Prune empty directories. See @ref{Removendo diretórios}.
+Elimina completamente diretórios vazios. Veja em @ref{Removendo diretórios}.
@item -p
-Pipe the files retrieved from the repository to standard output,
-rather than writing them in the current directory. Available
-with the @code{checkout} and @code{update} commands.
address@hidden <en>Pipe the files retrieved from the repository to standard
output,
address@hidden <en>rather than writing them in the current directory. Available
address@hidden <en>with the @code{checkout} and @code{update} commands.
+Direciona os arquivos recebidos do repositório para a
+saída padrão, ao invés de escrevê-los no diretório
+atual. Disponível com os comandos @code{checkout} e @code{update}.
@item -R
-Process directories recursively. This is on by default.
address@hidden <en>Process directories recursively. This is on by default.
+Porcessa os diretórios recursivamente. Este é o padrão.
-Available with the following commands: @code{annotate}, @code{checkout},
address@hidden <en>Available with the following commands: @code{annotate},
@code{checkout},
address@hidden <en>@code{commit}, @code{diff}, @code{edit}, @code{editors},
@code{export},
address@hidden <en>@code{rdiff}, @code{remove}, @code{rtag},
address@hidden <en>@code{status}, @code{tag}, @code{unedit}, @code{update},
@code{watch},
address@hidden <en>and @code{watchers}.
+Disponível com so seguintes comandos: @code{annotate}, @code{checkout},
@code{commit}, @code{diff}, @code{edit}, @code{editors}, @code{export},
@code{rdiff}, @code{remove}, @code{rtag},
address@hidden, @code{tag}, @code{unedit}, @code{update}, @code{watch},
-and @code{watchers}.
address@hidden, @code{tag}, @code{unedit},
address@hidden, @code{watch} e @code{watchers}.
address@hidden -r @var{tag}
address@hidden HEAD, special tag
address@hidden BASE, special tag
-Use the revision specified by the @var{tag} argument instead of the
-default @dfn{head} revision. As well as arbitrary tags defined
-with the @code{tag} or @code{rtag} command, two special tags are
-always available: @samp{HEAD} refers to the most recent version
-available in the repository, and @samp{BASE} refers to the
-revision you last checked out into the current working directory.
address@hidden <en>@item -r @var{tag}
address@hidden -r @var{etiqueta}
address@hidden <en>@cindex HEAD, special tag
address@hidden HEAD, etiqueta especial
address@hidden <en>@cindex BASE, special tag
address@hidden BASE, etiqueta especial
address@hidden <en>Use the revision specified by the @var{tag} argument instead
of the
address@hidden <en>default @dfn{head} revision. As well as arbitrary tags
defined
address@hidden <en>with the @code{tag} or @code{rtag} command, two special tags
are
address@hidden <en>always available: @samp{HEAD} refers to the most recent
version
address@hidden <en>available in the repository, and @samp{BASE} refers to the
address@hidden <en>revision you last checked out into the current working
directory.
+Usa a revisão especificada pelo argumento
address@hidden ao invés da revisão padrão @dfn{head}.
+Além das etiquetas arbitrárias definidas com os
+comandos @code{tag} ou @code{rtag}, duas etiquetas
+especiais estão sempre disponíveis: @samp{HEAD} se
+refere à versão mais recente disponível no repositório,
+e @samp{BASE} se refere à revisão à partir da qual você
+fez ???check out??? da ultima vez para o seu diretório
+de trabalho.
@c FIXME: What does HEAD really mean? I believe that
@c the current answer is the head of the default branch
@@ -13655,39 +13751,58 @@
@c <en>copy of a file: @sc{cvs} remembers the tag and continues to use it on
@c <en>future update commands, until you specify otherwise (for more
information
@c <en>on sticky tags/dates, @pxref{Sticky tags}).
-The tag specification is sticky when you use this
+A especificação da etiqueta é adesiva quando você usa com
@c option
-with @code{checkout} or @code{update} to make your own
-copy of a file: @sc{cvs} remembers the tag and continues to use it on
-future update commands, until you specify otherwise (for more information
-on sticky tags/dates, @pxref{Etiquetas adesivas}).
address@hidden ou @code{update} para trazer uma cópia
+para você de um arquivo: o @sc{cvs} vai lembrar da
+etiqueta e continuar a usá-la para futuros comandos
+update, até você especificar outra coisa (para mais
+informações sobre datas/etiquetas adesivas, @pxref{Etiquetas adesivas}).
@c <en>The tag can be either a symbolic or numeric tag, as
@c <en>described in @ref{Tags}, or the name of a branch, as
@c <en>described in @ref{Branching and merging}.
-The tag can be either a symbolic or numeric tag, as
-described in @ref{Etiquetas}, or the name of a branch, as
-described in @ref{Ramificando e mesclando}.
-
-Specifying the @samp{-q} global option along with the
address@hidden command option is often useful, to suppress
-the warning messages when the @sc{rcs} file
-does not contain the specified tag.
-
address@hidden: this is not the same as the overall @samp{cvs -r} option,
-which you can specify to the left of a @sc{cvs} command!}
-
address@hidden is available with the @code{annotate}, @code{checkout},
+A etiqueta pode ser tanto simbólica quanto numérica,
+como descrito em @ref{Etiquetas}, ou pode ser o nome de
+um ramo, como descrito em @ref{Ramificando e
+mesclando}.
+
address@hidden <en>Specifying the @samp{-q} global option along with the
address@hidden <en>@samp{-r} command option is often useful, to suppress
address@hidden <en>the warning messages when the @sc{rcs} file
address@hidden <en>does not contain the specified tag.
+Especificar a opção global @samp{-q} junto com a opção
+de comando @samp{-r} é frequentemente útil, para
+eliminar as mensagens de alerta quando o arquivo do
address@hidden não contém a etiqueta específica.
+
address@hidden <en>@strong{Note: this is not the same as the overall @samp{cvs
-r} option,
address@hidden <en>which you can specify to the left of a @sc{cvs} command!}
address@hidden: isto não é igual à opção global
address@hidden -r}, que você pode especificar à esquerda de
+um comando @sc{cvs}!}
+
address@hidden <en>@samp{-r} is available with the @code{annotate},
@code{checkout},
address@hidden <en>@code{commit}, @code{diff}, @code{history}, @code{export},
@code{rdiff},
address@hidden <en>@code{rtag}, and @code{update} commands.
+O @samp{-r} está disponível com os comandos @code{annotate}, @code{checkout},
@code{commit}, @code{diff}, @code{history}, @code{export}, @code{rdiff},
address@hidden, and @code{update} commands.
address@hidden e @code{update}.
address@hidden <en>@item -W
@item -W
-Specify file names that should be filtered. You can
-use this option repeatedly. The spec can be a file
-name pattern of the same type that you can specify in
-the @file{.cvswrappers} file.
-Available with the following commands: @code{import},
-and @code{update}.
address@hidden <en>Specify file names that should be filtered. You can
address@hidden <en>use this option repeatedly. The spec can be a file
address@hidden <en>name pattern of the same type that you can specify in
address@hidden <en>the @file{.cvswrappers} file.
address@hidden <en>Available with the following commands: @code{import},
address@hidden <en>and @code{update}.
+Especifica nomes de arquivos que devem ser filtrados.
+Você pode usar esta opção repetidamente. O argumento
+pode ser uma expressão regular de nome de arquivo do
+mesmo tipo dos que se especifica no arquivo
address@hidden Disponívjel nos seguintes
+comandos: @code{import} e @code{update}.
@end table
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Cvs-cvs] ccvs/doc/i18n/pt_BR cvs.texinfo,
Fred Ulisses Maranhão <=