[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Denemo-devel] Score refuses to preview or export
From: |
Ken Restivo |
Subject: |
Re: [Denemo-devel] Score refuses to preview or export |
Date: |
Mon, 29 Nov 2010 13:12:51 -0800 |
User-agent: |
Mutt/1.5.18 (2008-05-17) |
On Mon, Nov 29, 2010 at 11:24:46AM +0100, Nils Gey wrote:
> The problem is not the command SetTuningStaff. The message is just a warning,
> probably Richard forgot to upload TypesettingOn to git. I personally get this
> message myself, too. Even if its in git, this is unrelated to a pdf which
> refuses to print.
Thanks.
> This error message is typical for a failed lilypond. Please check the Denemo
> console: View->Console after you attempt print preview.
I did that, but the console is empty.
http://restivo.org/misc/denemo11.png
>
> There are only few circumstances how this could happen. The most common (we
> have to file this as bug report) is a beginning slur on a note which has no
> end. Unfortunatly Denemo does not show the beginning slur in the display
> itself, only down in the status bar as text "begin slur".
>
I stepped through the whole thing (it's short), and saw no such message in the
status bar, just stuff like "1: Note: Staff X Measure Y Object Z Not Appending".
> Try to remember if you did a command which has manual ending and beginning
> and if something went "wrong" there and you had to delete notes or move them.
> Fastest way is to spot the begin XY note, delete and recreate it.
>
There aren't any ties or slurs. I also grepped through the .denemo XML file,
and the word "slur" or "tie" does not appear anywhere.
Since there are so many keyboard equivalents, it's entirely possible that I
meant to hit control-x and hit x by mistake, or some such thing.
> I am in IRC the whole day from now on. Please contact me there.
>
Thanks. I'm in PST8PDT timezone though, so there may not be too many times when
we're both awake.
> Or send me the .denemo file, I will check it and repair it.
>
Might just do that, thanks! Although, I am curious what went wrong and how I
can avoid it.
-ken
---------------
> On Mon, 29 Nov 2010 00:48:36 -0800
> Ken Restivo <address@hidden> wrote:
>
> > Denemo refuses to preview or export a score I've just entered.
> >
> > denemo &
> > [4] 3017
> > address@hidden ~]$ BinReloc failed to initialize:
> > Domain: 1 (GBinReloc)
> > Code: 4
> > Message: Binary relocation support is disabled.
> > ----------------
> >
> > GNU Denemo, a gtk+ frontend for GNU Lilypond
> > (c) 1999-2005, 2009 Matthew Hiller, Adam Tee, and others
> >
> >
> > This program is provided with absolutely NO WARRANTY; see
> > the file COPYING for details.
> >
> > This software may be redistributed and modified under the
> > terms of the GNU General Public License; again, see the file
> > COPYING for details.
> >
> > Version 0_8_21Setting sample rate 48000.000000 - success
> > Setting audio.period-size to 128
> >
> > ** (denemo:3017): WARNING **: Cannot place SetTuningStaff after
> > TypesettingOn as requested,
> > because I haven't seen TypesettingOn yet
> > To fix this delete the SetTuningStaff command save the command set,
> > Quit and restart Denemo
> > Then re-install SetTuningStaff by right clicking on the TypesettingOn item
> > and choosing More Commands
> > And finally saving command set again
> > Parent: child exited, pid = 3022, exit status = 0
> > Got 0.040000 500.000000 500.000000
> >
> > ** (denemo:3017): WARNING **: Opening WholeMeasureRest, Bug in librsvg:rsvg
> > handle null but no error message
> > Got 0.040000 500.000000 500.000000
> >
> > ** (denemo:3017): WARNING **: Opening WholeMeasureRest, Bug in librsvg:rsvg
> > handle null but no error message
> > Parent: child exited, pid = 3023, exit status = 0
> > Parent: child exited, pid = 3024, exit status = 0
> > Parent: child exited, pid = 3025, exit status = 0
> > Error: May not be a PDF file (continuing anyway)
> > Error: PDF file is damaged - attempting to reconstruct xref table...
> > Error: Couldn't find trailer dictionary
> > Error: Couldn't read xref table
> > XtUngrabButton(drawArea,3,0)
> > Warning: Attempt to remove nonexistent passive grab
> >
> >
> >
> > OK that is one unexpected set of instructions, but I did what it said. And,
> > there is no way to delete the command SetTuningStaff! There's a button to
> > delete it, but when I do so, it only hides it, it refuses to delete it, and
> > it checks the Deleted and Hidden boxes even though I did not check the
> > "hidden" box:
> >
> > http://restivo.org/misc/denemo9.png
> >
> > All that happens in the command set is this:
> >
> > --- a/denemo/actions/Default.commands
> > +++ b/denemo/actions/Default.commands
> > @@ -3974,6 +3974,7 @@ right. </tooltip>
> > <row>
> > <action>SetTuningStaff</action>
> > <after>TypesettingOn</after>
> > + <hidden>true</hidden>
> > <scheme></scheme>
> > <menupath>/ObjectMenu/Directives/Tuning</menupath>
> > <label>Set Tuning for Current Staff</label>
> >
> >
> > Huh.
> >
> > Anyway, I follow the next set of instructions, which is incomplete. It says
> > to Choose More Commands, which I do, but then there is no SetTuningStaff
> > command there:
> >
> > http://restivo.org/misc/denemo10.png
> >
> > At this point I'm baffled. This is using the git version of 0.8.21 from
> > November 22, 2010.
> >
> > If I can't print or export, maybe I could just take screenshots and stitch
> > them together and print that for rehearsal tomorrow.
> >
> > -ken
> >
> > _______________________________________________
> > Denemo-devel mailing list
> > address@hidden
> > http://lists.gnu.org/mailman/listinfo/denemo-devel
> >