[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Denemo-devel] The missing regex in mxe build
From: |
Richard Shann |
Subject: |
Re: [Denemo-devel] The missing regex in mxe build |
Date: |
Fri, 15 Feb 2013 19:18:06 +0000 |
On Fri, 2013-02-15 at 12:18 -0600, Jeremiah Benham wrote:
> I had a hunch about something so I went to investigate. I found that
> cairo is not being build with pdf and ps support. This may be what is
> causing the evince backend issues. I am going to retry building cairo
> and see if these values change. I don't see poppler listed as a
> dependency for cairo. This could explain why.
I have been poking around inside the evince source code. What fails
first is a call to
g_type_module_use ()
which fails according to the documentation if "the plugin fails to
load". I don't know anything much about plugins, unfortunately...
Richard
>
> And the following internal features:
> pthread: no (disabled, use --enable-pthread to enable)
> gtk-doc: no
> gcov support: no
> symbol-lookup: no (requires bfd)
> test surfaces: no (disabled, use --enable-test-surfaces to enable)
> ps testing: no (requires libspectre)
> pdf testing: no (requires poppler-glib >= 0.13.3)
> svg testing: no (requires librsvg-2.0 >= 2.15.0)
> win32 printing testing: yes
>
> Jeremiah
>
>
> On Thu, Feb 14, 2013 at 12:53 PM, Jeremiah Benham
> <address@hidden> wrote:
>
>
> On Thu, Feb 14, 2013 at 11:18 AM, Richard Shann
> <address@hidden> wrote:
> On Thu, 2013-02-14 at 17:03 +0000, Richard Shann
> wrote:
> > On Thu, 2013-02-14 at 09:42 -0600, Jeremiah Benham
> wrote:
> > >
> > > I have tested it, but
> > > cannot get it to fire off from denemo - it
> is not at all
> > > obvious where
> > > glib will look for the helper program with
> a static build, it
> > > doesn't
> > > seem to find it in the path, and we don't
> have a .dll, though
> > > if we did
> > > it would be where I have put
> gspawn_win32_helper.exe, ie where
> > > denemo.exe is and fluidsynth.dll, in the
> bin directory.
> >
> > This is fixed now - it turns out there are two
> helper functions the
> > other one is called gspawn_win32_helper-console.exe
> and that is also
> > built by mxe and once I installed that all was well.
> > Now LilyPond is crashing, but that will be because
> it is being found in
> > an old Denemo installation without its data path
> being set up before it
> > is called. Either we need to combine the two builds
> or build LilyPond on
> > mxe (yikes!) or leave it to the user to do a
> standard LilyPond install
> > from the LilyPond website.
>
>
> Now I have LilyPond successfully completing, but the
> evince build is
> incomplete - it cannot load pdf files :(
> The evince build recipe is something you have
> generated Jeremiah - I
> expect you have built something that I have not copied
> across, some sort
> of backend module? I think I just copied everything
> that was
> bin/*evince* ...
> or is it that some pdf backend is not built?
>
> We are using evince 2.32.0 here. I created autoconf/make files
> for 2.30.3 I believe. We can revert to 2.30.3 if we need to. I
> have no idea if my changes to 2.30.3 actually got it working
> correctly or not.
>
> Jeremiah
>
>
> Richard
>
>
>
>
- Re: [Denemo-devel] The missing regex in mxe build, (continued)
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/14
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/14
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/14
- Re: [Denemo-devel] The missing regex in mxe build, Jeremiah Benham, 2013/02/14
- Re: [Denemo-devel] The missing regex in mxe build, Jeremiah Benham, 2013/02/14
- Re: [Denemo-devel] The missing regex in mxe build, Jeremiah Benham, 2013/02/15
- Re: [Denemo-devel] The missing regex in mxe build,
Richard Shann <=
- Re: [Denemo-devel] The missing regex in mxe build, Jeremiah Benham, 2013/02/15
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/16
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/17
- Re: [Denemo-devel] The missing regex in mxe build, Jeremiah Benham, 2013/02/17
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/17
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/17
- Re: [Denemo-devel] The missing regex in mxe build, Jeremiah Benham, 2013/02/17
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/18
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/18
- Re: [Denemo-devel] The missing regex in mxe build, Richard Shann, 2013/02/18