[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Denemo-devel] The 1.02 binary
From: |
Richard Shann |
Subject: |
Re: [Denemo-devel] The 1.02 binary |
Date: |
Wed, 08 May 2013 21:54:17 +0100 |
Great! this one works just fine.
I'll test the mingw one when you have it and then we can go for a
release.
Richard
On Wed, 2013-05-08 at 09:49 -0500, Jeremiah Benham wrote:
> I uploaded a new linux binary. This one should be ok.
>
> Jeremiah
>
> On May 8, 2013 4:07 AM, "Richard Shann" <address@hidden>
> wrote:
> I have just downloaded and tested
> http://www.denemo.org/downloads/denemo-1.0.2-0.linux-x86
>
> on my Debian stable 64-bit machine. The clefs, noteheads etc
> are not
> being found and guile doesn't seem to have denemo-modules in
> its load
> path. The Denemo.ttf font is found and LilyPond is executing
> correctly
> out-of-the-box.
> Below is the output at startup...
>
> Richard
>
> ./denemo
> ./denemo: 42: cannot create : Directory nonexistent
> PREFIX==/home/denemo-user/denemo/usr/..
> GUILE_LOAD_PATH
> is
> /home/denemo-user/denemo/usr/share/guile/1.8::/home/denemo-user/denemo/usr/../share/denemo/actions
> GUILE_LOAD_PATH
> is
> /home/denemo-user/denemo/usr/share/guile/1.8::/home/denemo-user/denemo/usr/../share/denemo/actions:/home/denemo-user/denemo/usr/../share/denemo/actions/denemo-modules
> LYEDITOR denemoclientGtk-Message: Failed to load module
> "canberra-gtk-module": libcanberra-gtk-module.so: cannot open
> shared
> object file: No such file or directory
>
> setting lilypath==/home/denemo-user/denemo/usr/bin/lilypond
>
> systemwide
> == /home/denemo-user/denemo/usr/etc/denemo/denemo.conf
>
> xmlsource
> == /home/denemo-user/denemo/usr/etc/denemo/denemo.conf
>
> GNU Denemo, a free and open music notation editor
> (c) 1999-2005, 2009 Matthew Hiller, Adam Tee, and others,
> 2010-2011
> Richard Shann, Jeremiah Benham, Nils Gey and others.
>
>
> This program is provided with absolutely NO WARRANTY; see
> the file COPYING for details.
>
> This software may be redistributed and modified under the
> terms of the GNU General Public License; again, see the file
> COPYING for details.
>
> audio driver is 'portaudio' 0
> Initializing Fluidsynth
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm.c:2217:(snd_pcm_open_noupdate)
> Unknown PCM cards.pcm.rear
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm.c:2217:(snd_pcm_open_noupdate)
> Unknown PCM cards.pcm.center_lfe
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm.c:2217:(snd_pcm_open_noupdate)
> Unknown PCM cards.pcm.side
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm_dmix.c:1018:(snd_pcm_dmix_open)
> unable to open slave
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm_dmix.c:1018:(snd_pcm_dmix_open)
> unable to open slave
> fluidsynth: warning: Failed to pin the sample data to RAM;
> swapping is
> possible.
>
> ** (denemo:11186): WARNING **:
> The default soundfont has been loaded
>
> initializing PortAudio backend
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm.c:2217:(snd_pcm_open_noupdate)
> Unknown PCM cards.pcm.rear
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm.c:2217:(snd_pcm_open_noupdate)
> Unknown PCM cards.pcm.center_lfe
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm.c:2217:(snd_pcm_open_noupdate)
> Unknown PCM cards.pcm.side
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm_dmix.c:1018:(snd_pcm_dmix_open)
> unable to open slave
> ALSA
> lib
> /home/jjbenham/src/gub/target/linux-x86/src/alsa-1.0.25/src/pcm/pcm_dmix.c:1018:(snd_pcm_dmix_open)
> unable to open slave
> opening output device 'ALSA: HDA Intel PCH: VT2020 Digital
> (hw:0,1)'
> MIDI driver is 'portmidi'
> initializing PortMidi backend
> opening input device 'ALSA: Midi Through Port-0'
> opening output device 'ALSA: Midi Through Port-0'
>
> Setting EVINCE_MODULE_PATH
> == /home/denemo-user/denemo/usr/lib/evince/2/backends
> recent (null)
> Version 1_0_2
> ** (denemo:11186): WARNING **:
> A script error for
> file/script
> /home/denemo-user/denemo/usr/share/denemo/actions/denemo.scm; the throw
> arguments are
>
> (primitive-load-path Unable to find file ~S in load path
> (scheme.scm)
> #f)
>
> ...
>
>
> _______________________________________________
> Denemo-devel mailing list
> address@hidden
> https://lists.gnu.org/mailman/listinfo/denemo-devel