[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Denemo-devel] trouble creating parts
From: |
Donald J. Stewart |
Subject: |
Re: [Denemo-devel] trouble creating parts |
Date: |
Fri, 18 Nov 2016 12:36:42 -0800 |
User-agent: |
KMail/5.1.3 (Linux/4.4.0-47-generic; KDE/5.18.0; x86_64; ; ) |
ok, this is frustrating...
I do not have this when I search 'poly' in the Command Center...
I do not have this feature under ObjectMenu->MomementMenu-
>Typesetter...
This is what I have under Typesetter:
Print Hide/Unhide Movement
Transpose on Print
Print/Hide Barlines
Print Mensural Barlines
NoteHeadStyles
Custos
Hide Empty Staffs
Print Layout
Page Break Before
Blank Page Before
Reduce Space Between Systems
Beaming Rules
I am using AMD64...could this be a reason? Did it not make it into the
AMD64 builds?
On Friday, November 18, 2016 7:29:18 PM PST Richard Shann wrote:
> On Fri, 2016-11-18 at 11:22 -0800, Donald J. Stewart wrote:
> > I have the builds from 11/15, unfortunately, I can't find any
Polymetric
> > Staffs feature in my build.
> >
> > Am I missing something here, or how do I turn this feature on?
>
> Searching for "poly" in the View->Command Center the fourth hit was
> this:
>
> Command: Polymetric Staffs (Off/On)
> Turns on/off independent time signatures and barline on the staffs.
Use
> for polymetric notation.
> Location: ObjectMenu->MovementMenu->Typesetter
> Internal Name: PolymetricStaffs
>
> Any build after this commit
>
> 2016-10-24 Richard Shann Allow repeats lilypond style to be staff
context
>
> will allow differing barlines at the same moment.
>
> Richard
>
> > In your example, it's in the Movements On Friday, November 18, 2016
> >
> > 8:49:48 AM PST Richard Shann wrote:
> > > On Thu, 2016-11-17 at 15:28 -0800, Donald J. Stewart wrote:
> > > > I see in your example, that under Movements->Movements
Property
> > > > Editor, I see a directive (perhaps wrong word?) of Denemo
Movement
> > > > Layout Denemo Directive tagged:Polymetric Staffs
> > > >
> > > > There's what I need to put in my score, right?
> > >
> > > yes, you need to turn polymetric staffs on, and it must be with the
> > > current version of that command - the very first version that I
created
> > > allowed simultaneous conflicting time signatures but not barlines.
That
> > > was in the sources for a couple of days, then you asked about
barlines
> > > and I updated it to allow conflicting barlines too.
> > > If you have the old version turn them off then on again (using the
> > > latest build).
> > >
> > > Richard
> > >
> > > > On Thursday, November 17, 2016 10:11:01 PM PST Richard Shann
> >
> > wrote:
> > > > > You don't need to use markup, the current version of Polymetric
> >
> > staffs
> >
> > > > > allows not only differing time signatures at the same musical
> >
> > moment
> >
> > > > but
> > > >
> > > > > also differing bar lines - see attached example.
> > > > >
> > > > > Richard
> > > > >
> > > > > On Thu, 2016-11-17 at 13:07 -0800, Donald J. Stewart wrote:
> > > > > > neither one of these works, I'm learning on the fly...
> > > > > >
> > > > > > On Thursday, November 17, 2016 12:39:56 PM PST Donald J.
> >
> > Stewart
> >
> > > > > > wrote:
> > > > > > > yes, that's the question...the lilypond syntax.
> > > > > > >
> > > > > > > as far as entering repeat barlines that only show up on the
> > > > > > > score
> > > >
> > > > and
> > > >
> > > > > > do
> > > > > >
> > > > > > > not affect MIDI, I see that the lilypond syntax in Denemo is:
> > > > > > >
> > > > > > > \bar ".|:"
> > > > > > >
> > > > > > > how to create this as a markup, is the question.
> > > > > > >
> > > > > > > \markup \bar ".|:"
> > > > > > >
> > > > > > > or
> > > > > > >
> > > > > > > \markup {\bar ".|:"}
> > > > > > >
> > > > > > > or ?
> > > > > > >
> > > > > > > are concernedOn Thursday, November 17, 2016 9:25:33 AM
PST
> > > > > >
> > > > > > Richard
> > > > > >
> > > > > > > Shann wrote:
> > > > > > > > On Wed, 2016-11-16 at 14:20 -0800, Donald J. Stewart
wrote:
> > > > > > > > > Another question is that I'd like to make the metronome
> > > >
> > > > marking
> > > >
> > > > > > > span
> > > > > > >
> > > > > > > > > a
> > > > > > > > > number of beats, in this case 48-52. What is the best way
to
> > > >
> > > > create
> > > >
> > > > > > > > > this in
> > > > > > > > > Denemo? or should I edit it in the lilypond editor?
> > > > > > > >
> > > > > > > > I'm not sure what this would look like - if you can create the
> > > > > > > > LilyPond
> > > > > > > > syntax you need, then it is usually easy to get Denemo to
> > > >
> > > > generate it.
> > > >
> > > > > > > > Richard
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > Denemo-devel mailing list
> > > > > > > address@hidden
> > > > > > > https://lists.gnu.org/mailman/listinfo/denemo-devel
- Re: [Denemo-devel] trouble creating parts, (continued)
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/16
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/17
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/17
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/17
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/17
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/17
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/17
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/18
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/18
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/18
- Re: [Denemo-devel] trouble creating parts,
Donald J. Stewart <=
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/18
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/18
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/19
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/19
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/20
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/20
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/21
- Re: [Denemo-devel] trouble creating parts, Donald J. Stewart, 2016/11/21
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/21
- Re: [Denemo-devel] trouble creating parts, Richard Shann, 2016/11/22