[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
difficulty with electric, kde3/qt3
From: |
Mark Wyatt |
Subject: |
difficulty with electric, kde3/qt3 |
Date: |
Tue, 27 Aug 2002 17:37:08 -0500 |
I'm having a little difficulty getting Electric 6.06 to build on my system
(Suse 8.0/kde 3).
Some of this, I'm sure is just 'newbie trouble', but I'd appreciate some help.
I assume that as kde is built on Qt, I should be trying to build the Qt
variant. Is that corrrect?
At first I was having difficulty in that 'moc' was not found. There is a moc on
my system (actually incorrect; there are TWO mocs on my system a qt 2.3.2 and a
qt 3.0.3 moc, but I assume that only the 3.0.3 one comes into question, as it
is almost certain that my kde 3 system will be built against a qt 3 moc) but
its not anywhere in the path; so I have added a symbolic link to it in
/opt/kde3/bin, which is in the path, and that looks as if it has made the
initial problem go away. (I include this info. in case it helps in future
releases; I would have been helped had there been a clearer error message, or
an install guide refence to this problem; but then this is the first time that
I have compiled an application this complex from source.)
Having got past that problem, I still have a problem. I get the following
output, which may help someone, but that person is not me. I've omitted all the
'includes' that come first, as I assume that they don't give helpful info. If
that was a mistake, I could post the info.
It looks as if the hard problem is in 'src/tec/tecmocmos.o(.text+0x2f35)' and
its reference to
`tech_initmaxdrcsurround(void)', but I have no clue as to what to do about it.
Also, I'm not going to worry about mktemp and mkstemp; should someone be
worrying about them?
c++ -o electric src/cons/conlay.o src/cons/conlin.o src/cons/conlingtt.o
src/cons/conlinprs.o src/cons/conlint
tg.o src/cons/contable.o src/db/aidtable.o src/db/data.o src/db/dbchange.o
src/db/dbcontour.o src/db/dbcontrol.
o src/db/dbcreate.o src/db/dberror.o src/db/dbgeom.o src/db/dblang.o
src/db/dblangelk.o src/db/dblangjava.o src
/db/dblangtcl.o src/db/dblibrary.o src/db/dbmath.o src/db/dbmemory.o
src/db/dbmerge.o src/db/dbmult.o src/db/db
noproto.o src/db/dbtech.o src/db/dbtechi.o src/db/dbtext.o src/db/dbvars.o
src/drc/drc.o src/drc/drcbatch.o src
/drc/drcflat.o src/graph/graphqt.o src/graph/graphqtdlg.o
src/graph/graphqtdraw.o src/graph/graphdraw.o src/gra
ph/moc_graphqt.o src/graph/moc_graphqtdlg.o src/io/io.o src/io/iobinaryi.o
src/io/iobinaryo.o src/io/iocifin.o
src/io/iocifout.o src/io/iocifpars.o src/io/iodefi.o src/io/iodxf.o
src/io/ioecado.o src/io/ioeagleo.o src/io/i
oedifi.o src/io/ioedifo.o src/io/iogdsi.o src/io/iogdso.o src/io/iohpglout.o
src/io/iolefi.o src/io/iolefo.o sr
c/io/iolout.o src/io/iopadso.o src/io/iopsout.o src/io/iosdfi.o src/io/iosuei.o
src/io/iotexti.o src/io/iotexto
.o src/io/iovhdl.o src/misc/compact.o src/misc/compensate.o src/misc/erc.o
src/misc/logeffort.o src/misc/projec
ttool.o src/net/netdiff.o src/net/netextract.o src/net/netflat.o
src/net/network.o src/pla/pla.o src/pla/placde
code.o src/pla/placio.o src/pla/placngrid.o src/pla/placpgrid.o
src/pla/placpla.o src/pla/placutils.o src/pla/p
lanfacets.o src/pla/planopt.o src/pla/planprog1.o src/pla/planprog2.o
src/rout/rout.o src/rout/routauto.o src/r
out/routmaze.o src/rout/routmimic.o src/rout/routriver.o src/sc/sc1.o
src/sc/sc1command.o src/sc/sc1component.o
src/sc/sc1connect.o src/sc/sc1delete.o src/sc/sc1electric.o src/sc/sc1err.o
src/sc/sc1extract.o src/sc/sc1inte
rface.o src/sc/sc1maker.o src/sc/sc1place.o src/sc/sc1route.o src/sc/sc1sim.o
src/sim/sim.o src/sim/simals.o sr
c/sim/simalscom.o src/sim/simalsflat.o src/sim/simalsgraph.o
src/sim/simalssim.o src/sim/simalsuser.o src/sim/s
imfasthenry.o src/sim/simirsim.o src/sim/simmossim.o src/sim/simpal.o
src/sim/simsilos.o src/sim/simsim.o src/s
im/simspice.o src/sim/simspicerun.o src/sim/simtexsim.o src/sim/simverilog.o
src/sim/simwindow.o src/tec/tecart
.o src/tec/tecbicmos.o src/tec/tecbipolar.o src/tec/teccmos.o
src/tec/teccmosdodn.o src/tec/tecefido.o src/tec/
tecfpga.o src/tec/tecgem.o src/tec/tecgen.o src/tec/tecmocmos.o
src/tec/tecmocmosold.o src/tec/tecmocmossub.o s
rc/tec/tecnmos.o src/tec/tecpcb.o src/tec/tecrcmos.o src/tec/tecschem.o
src/tec/tectable.o src/usr/usr.o src/us
r/usrarc.o src/usr/usrcheck.o src/usr/usrcom.o src/usr/usrcomab.o
src/usr/usrcomcd.o src/usr/usrcomek.o src/usr
/usrcomln.o src/usr/usrcomoq.o src/usr/usrcomrs.o src/usr/usrcomtv.o
src/usr/usrcomwz.o src/usr/usrctech.o src/
usr/usrdiacom.o src/usr/usrdiaedit.o src/usr/usrdisp.o src/usr/usreditemacs.o
src/usr/usreditpac.o src/usr/usre dtecc.o src/usr/usredtecg.o
src/usr/usredtecp.o src/usr/usrgraph.o src/usr/usrhigh.o src/usr/usrmenu.o
src/usr/ usrmisc.o src/usr/usrnet.o src/usr/usrparse.o
src/usr/usrstatus.o src/usr/usrterminal.o src/usr/usrtrack.o src/
usr/usrtranslate.o src/usr/usrwindow.o src/vhdl/vhdl.o src/vhdl/vhdlexpr.o
src/vhdl/vhdlnetlisp.o src/vhdl/vhdl parser.o src/vhdl/vhdlals.o
src/vhdl/vhdlquisc.o src/vhdl/vhdlsemantic.o src/vhdl/vhdlsilos.o -lSM
-lICE - L/usr/X11R6/lib -L/usr/lib/qt3/lib -lqt -lX11 -lm
-lpthread
src/graph/graphqt.o: In function `emaketemp':
src/graph/graphqt.o(.text+0x780e): the use of `mktemp' is dangerous, better use
`mkstemp'
src/tec/tecmocmos.o: In function `mocmos_setstate(long)':
src/tec/tecmocmos.o(.text+0x2f35): undefined reference to
`tech_initmaxdrcsurround(void)'
collect2: ld returned 1 exit status
make: *** [electric-target] Error 1
Thanks
Mark
--
__________________________________________________________
Sign-up for your own FREE Personalized E-mail at Mail.com
http://www.mail.com/?sr=signup
- difficulty with electric, kde3/qt3,
Mark Wyatt <=