[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
ERC
From: |
Abas Amir |
Subject: |
ERC |
Date: |
Fri, 1 Aug 2003 07:21:15 -0700 (PDT) |
Hello Rubin,
I need your help to explain how to correct ERC errors
from PADs. Is the Pad distributed with incomplete
design means the user need to check ERC or etc. Below
are some of the error appeared after ERC. All the
errors are came from PADs.
Thanks.
Checking Wells and Substrates... (type Windows-C to
abort)
2030 nodes of type P-Transistor
1964 nodes of type N-Transistor
1684 networks found
FOUND 896 WELL ERRORS (9.99 seconds)
To review errors, type:
> Show the next error
< Show the previous error
================================= 3
=================================
ERC error 1 of 896: P-Well contact not connected to
ground
================================= 4
=================================
ERC error 2 of 896: N-Well contact not connected to
power
================================= 5
=================================
ERC error 3 of 896: P-Well contacts are not connected
================================= 6
=================================
ERC error 4 of 896: P-Well contact not connected to
ground
================================= 7
=================================
ERC error 5 of 896: P-Well contacts are not connected
================================= 8
=================================
ERC error 6 of 896: P-Well contact not connected to
ground
================================= 9
=================================
ERC error 7 of 896: P-Well contacts are not connected
================================= 10
=================================
ERC error 8 of 896: P-Well contact not connected to
ground
================================= 11
=================================
ERC error 9 of 896: N-Well contact not connected to
power
================================= 12
=================================
ERC error 10 of 896: N-Well contact not connected to
power
================================= 13
=================================
ERC error 11 of 896: N-Well contact not connected to
power
================================= 14
=================================
ERC error 12 of 896: N-Well contact not connected to power
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com