[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Discuss-gnuradio] FPGA replacement
From: |
Brian Padalino |
Subject: |
Re: [Discuss-gnuradio] FPGA replacement |
Date: |
Fri, 16 Feb 2007 07:30:26 -0500 |
On 2/16/07, Roberto Mastrodonato <address@hidden> wrote:
Hi all
as the USRP fpga is open, does anybody know if it's possible to replace the
FPGA module in the board with a new configurable FPGA?
10x
Roberto
If you mean a new FPGA configuration - then sure! Just pick up your
VHDL or Verilog book, and change the logic within the FPGA.
If you mean a different physical FPGA, it might be a bit difficult to
find one that is pin-compatible. Plus you will have to reflow the
board.
Hope that helps.
Brian