[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Discuss-gnuradio] multi_file usrp tuning options
From: |
ematlis |
Subject: |
[Discuss-gnuradio] multi_file usrp tuning options |
Date: |
Thu, 31 May 2007 16:11:47 -0400 (EDT) |
Hi-
I'm developing a 4-channel receiver using 4 rx paths and 2 LFRX
daughter boards. I'm basing my code on the multi_* examples in the
multi-antenna directory. Two of the channels I want to capture are
AM-modulated at roughly 2 MHz carrier frequency, the other two signals are
not modulated and are low frequency on the order of 1 kHz.
My question is, can I tune each subdevice to a different frequency? I
would need to in order to capture both sets of signals simultaneously in a
phase-locked fashion (this is important).
thanks,
eric
************************************
Eric H. Matlis, Ph.D.
Aerospace & Mechanical Engineering Dept.
120 Hessert Center for Aerospace Research
University of Notre Dame
Notre Dame, IN 46556-5684
Phone: (574) 631-6054
Fax: (574) 631-8355
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Discuss-gnuradio] multi_file usrp tuning options,
ematlis <=