[Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard

discuss-gnuradio

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard

From:	Jason Anders
Subject:	[Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard
Date:	Tue, 12 Feb 2008 10:38:37 +0800

Hi!

What command should I use when I want to access the received signals at port RX-B of the Basix Rx daughterboard?
I have tried using usrp.source_c(1,my_block) but then an error results saying that I cannot find usrp 1.

What I intended with that command was to access RX-B of the BASIC Rx Daughterboard.

Your replies are greatly appreciated.

Thanks!

[Prev in Thread]

Current Thread

[Next in Thread]

[Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard, Jason Anders <=
- Message not available
  - Re: [Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard, Jason Anders, 2008/02/12
    - Re: [Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard, Karthik Vijayraghavan, 2008/02/12
    - Re: [Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard, Karthik Vijayraghavan, 2008/02/12

Prev by Date: Re: [Discuss-gnuradio] minimizing interference with usrp
Next by Date: Re: [Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard
Previous by thread: [Discuss-gnuradio] minimizing interference with usrp
Next by thread: Re: [Discuss-gnuradio] Problem: Accessing RX-B of the basic Rx daughterboard
Index(es):
- Date
- Thread